共查询到20条相似文献，搜索用时 31 毫秒
1.
Alex Rattray Daniel Ierodiaconou Laurie Laurenson Shoaib Burq Marcus Reston 《Estuarine, Coastal and Shelf Science》2009
Information regarding the composition and extent of benthic habitats on the South East Australian continental shelf is limited. In this habitat mapping study, multibeam echosounder (MBES) data are integrated with precisely geo-referenced video ground-truth data to quantify benthic biotic communities at Cape Nelson, Victoria, Australia. Using an automated decision tree classification approach, 5 representative biotic groups defined from video analysis were related to hydro-acoustically derived variables in the Cape Nelson survey area. Using a combination of multibeam bathymetry, backscatter and derivative products produced highest overall accuracy (87%) and kappa statistic (0.83). This study demonstrates that decision tree classifiers are capable of integrating variable data types for mapping distributions of benthic biological assemblages, which are important in maintaining biodiversity and other system services in the marine environment. 相似文献
2.
The establishment of multibeam echosounders (MBES) as a mainstream tool in ocean mapping has facilitated integrative approaches towards nautical charting, benthic habitat mapping, and seafloor geotechnical surveys. The bathymetric and backscatter information generated by MBES enables marine scientists to present highly accurate bathymetric data with a spatial resolution closely matching that of terrestrial mapping, and can generate customized thematic seafloor maps to meet multiple ocean management needs. However, when a variety of MBES systems are used, the creation of objective habitat maps can be hindered by the lack of backscatter calibration, due for example, to system-specific settings, yielding relative rather than absolute values. Here, we describe an approach using object-based image analysis to combine 4 non-overlapping and uncalibrated (backscatter) MBES coverages to form a seamless habitat map on St. Anns Bank (Atlantic Canada), a marine protected area hosting a diversity of benthic habitats. The benthoscape map was produced by analysing each coverage independently with supervised classification (k-nearest neighbor) of image-objects based on a common suite of 7 benthoscapes (determined with 4214 ground-truthing photographs at 61 stations, and characterized with backscatter, bathymetry, and bathymetric position index). Manual re-classification based on uncertainty in membership values to individual classes—especially at the boundaries between coverages—was used to build the final benthoscape map. Given the costs and scarcity of MBES surveys in offshore marine ecosystems—particularly in large ecosystems in need of adequate conservation strategies, such as in Canadian waters—developing approaches to synthesize multiple datasets to meet management needs is warranted. 相似文献
3.
User expectations for multibeam echo sounders backscatter strength data-looking back into the future
Vanessa Lucieer Marc Roche Koen Degrendele Mashkoor Malik Margaret Dolan Geoffroy Lamarche 《Marine Geophysical Researches》2018,39(1-2):23-40
With the ability of multibeam echo sounders (MBES) to measure backscatter strength (BS) as a function of true angle of insonification across the seafloor, came a new recognition of the potential of backscatter measurements to remotely characterize the properties of the seafloor. Advances in transducer design, digital electronics, signal processing capabilities, navigation, and graphic display devices, have improved the resolution and particularly the dynamic range available to sonar and processing software manufacturers. Alongside these improvements the expectations of what the data can deliver has also grown. In this paper, we identify these user-expectations and explore how MBES backscatter is utilized by different communities involved in marine seabed research at present, and the aspirations that these communities have for the data in the future. The results presented here are based on a user survey conducted by the GeoHab (Marine Geological and Biological Habitat Mapping) association. This paper summarises the different processing procedures employed to extract useful information from MBES backscatter data and the various intentions for which the user community collect the data. We show how a range of backscatter output products are generated from the different processing procedures, and how these results are taken up by different scientific disciplines, and also identify common constraints in handling MBES BS data. Finally, we outline our expectations for the future of this unique and important data source for seafloor mapping and characterisation. 相似文献
4.
Chris McGonigle Craig Brown Rory Quinn Jonathan Grabowski 《Estuarine, Coastal and Shelf Science》2009,81(3):423-437
In recent years, efforts have increased to develop quantitative, computer-directed methods for segmentation of multibeam (MBES) backscatter data. This study utilises MBES backscatter data acquired at Stanton Banks (UK) and subsequently processed through the QTC-Multiview software environment in a bid to evaluate the program's ability to perform unsupervised classification. Statistical comparison with ground-truth data (grab, stills and video) enabled cross validation of acoustic segmentation and biological assemblages observed at the site. 132 unspecified variables were extracted from user-specified rectangular patches of the backscatter image, reduced to three vectors by PCA, then clustered and classified by the software. Multivariate analyses of ground-truth data were conducted on 75 stills images and 51 grab samples. Video footage coincident with the stills was divided into 30 s segments and coded by dominant substrate and species. Cross tabulation determined the interrelationship between software classifications, multivariate analysis of the biological assemblages and coded video segments. Multiview optimally identified 19 classes using the automated clustering engine. These were revised to 6 habitats a posteriori, using combined analysis of ground-truth data and Multiview data products. These habitats broadly correspond to major physiographic provinces within the region. Multivariate statistical analysis reveals low levels of assemblage similarity (<35%) for samples occurring within Multiview classes, irrespective of the mode of acquisition. Coded video data is more spatially appropriate than the other methods of ground-truthing investigated, although it is less well suited to the extraction of truly quantitative data. Multivariate analysis indicates assemblages within physiographically distinct Multiview classes have a low degree of biological similarity, supporting the notion that abiotic proxies may be contraindicative of benthic assemblage variations. QTC-Multiview performs well as a mechanism for computer-assisted segmentation of MBES backscatter imagery into acoustic provinces; however a degree of caution is required prior to ascribing ecological significance to these classifications. 相似文献
5.
Multibeam echosounders (MBES) have become a widely used acoustic remote sensing tool to map and study the seafloor, providing co-located bathymetry and seafloor backscatter. Although the uncertainty associated with MBES-derived bathymetric data has been studied extensively, the question of backscatter uncertainty has been addressed only minimally and hinders the quantitative use of MBES seafloor backscatter. This paper explores approaches to identifying uncertainty sources associated with MBES-derived backscatter measurements. The major sources of uncertainty are catalogued and the magnitudes of their relative contributions to the backscatter uncertainty budget are evaluated. These major uncertainty sources include seafloor insonified area (1–3 dB), absorption coefficient (up to >?6 dB), random fluctuations in echo level (5.5 dB for a Rayleigh distribution), and sonar calibration (device dependent). The magnitudes of these uncertainty sources vary based on how these effects are compensated for during data acquisition and processing. Various cases (no compensation, partial compensation and full compensation) for seafloor insonified area, transmission losses and random fluctuations were modeled to estimate their uncertainties in different scenarios. Uncertainty related to the seafloor insonified area can be reduced significantly by accounting for seafloor slope during backscatter processing while transmission losses can be constrained by collecting full water column absorption coefficient profiles (temperature and salinity profiles). To reduce random fluctuations to below 1 dB, at least 20 samples are recommended to be used while computing mean values. The estimation of uncertainty in backscatter measurements is constrained by the fact that not all instrumental components are characterized and documented sufficiently for commercially available MBES. Further involvement from manufacturers in providing this essential information is critically required. 相似文献
6.
在多波束回声声纳系统中，高分辨处理算法例如MUSIC、ESPRIT，被广泛应用于海底地形的测绘。在应用高分辨算法时，一条均匀线阵是必要条件。然而，由于系统覆盖范围/分辨率的需求以及安装空间的限制，在多波束系统中经常会采用特殊形状的接收阵列，这使得高分辨算法无法直接应用。同时回波信号的短时平稳特性使得难以估计出协方差矩阵，这也增加了高分辨算法在多波束系统中的应用难度。本文首先介绍一种基于多角度子阵波束形成的ESPRIT算法，该算法能降低高分辨算法对信噪比、样本点数和计算能力的要求。仿真表明此算法能提供更好的分辨力。接着提出一种将基于多角度子阵波束形成的ESPRIT算法与虚拟阵列变换相结合的高分辨底检测算法，并针对高分辨底检测算法在U型阵上的应用进行了探讨。计算机仿真和试验数据处理结果验证了文章所提高分辨底检测算法的有效性。 相似文献
7.
Processing of high-frequency multibeam echo sounder data for seafloor characterization 总被引：9，自引：0，他引：9
Processing simultaneous bathymetry and backscatter data, multibeam echosounders (MBESs) show promising abilities for remote seafloor characterization. High-frequency MBESs provide a good horizontal resolution, making it possible to distinguish fine details at the water-seafloor interface. However, in order to accurately measure the seafloor influence on the backscattered energy, the recorded sonar data must first be processed and cleared of various artifacts generated by the sonar system itself. Such a preprocessing correction procedure along with the assessment of its validity limits is presented and applied to a 95-kHz MBES (Simrad EM 1000) data set. Beam pattern effects, uneven array sensitivities, and inaccurate normalization of the ensonified area are removed to make possible further quantitative analysis of the corrected backscatter images. Unlike low-frequency data where the average backscattered energy proves to be the only relevant feature for discriminating the nature of the seafloor, high-frequency MBES backscatter images exhibit visible texture patterns. This additional information involves different statistical distributions of the backscattered amplitudes obtained from various seafloor types. Non-Rayleigh statistics such as K-distributions are shown to fit correctly the skewed distributions of experimental high-frequency data. Apart from the effect of the seafloor micro-roughness, a statistical model makes clear a correlation between the amplitude statistical distributions and the signal incidence angle made available by MBES bathymetric abilities. Moreover, the model enhances the effect of the first derivative of the seafloor backscattering strength upon statistical distributions near the nadir and at high incidence angles. The whole correction and analysis process is finally applied to a Simrad EM 1000 data set. 相似文献
8.
Ele Vahtm?e Tiit Kutser Jonne Kotta Merli P?rnoja Tiia M?ller Lennart Lennuk 《Oceanology》2012,52(6):803-809
It is known that the structure of benthic macrophyte and invertebrate habitats indicate the quality of coastal water. Thus, a large-scale analysis of the spatial patterns of coastal marine habitats makes it possible to adequately estimate the status of valuable coastal marine habitats, provide better evidence for environmental changes, and describe the processes behind the changes. Knowing the spatial distribution of benthic habitats is also important from the coastal management point of view. Our previous results clearly demonstrated that remote sensing methods can be used to map water depth and distribution of taxonomic groups of benthic algae (e.g., red, green, and brown algae) in the optically complex coastal waters of the Baltic Sea. We have as well shown that benthic habitat mapping should be done at high spatial resolution owing to the small-scale heterogeneity of such habitats in Estonian coastal waters. Here we tested the capability of high spatial resolution hyperspectral airborne image in its application for mapping benthic habitats. A big challenge is to define appropriate mapping classes that are also meaningful from the ecological point of view. In this study two benthic habitat classification schemes??broader level and finer level??were defined for the study area. The broader level classes were relatively well classified, but discrimination among the units of the finer classification scheme posed a considerable challenge and required a careful approach. Benthic habitat classification provided the highest accuracy in the case of the Spectral Angle Mapper classification method applied to a radiometrically corrected image. Further processing levels, such as spatial filtering and glint correction, decreased the classification accuracy. 相似文献
9.
Jess I. T. Hillman Geoffroy Lamarche Arne Pallentin Ingo A. Pecher Andrew R. Gorman Jens Schneider von Deimling 《Marine Geophysical Researches》2018,39(1-2):205-227
Using automated supervised segmentation of multibeam backscatter data to delineate seafloor substrates is a relatively novel technique. Low-frequency multibeam echosounders (MBES), such as the 12-kHz EM120, present particular difficulties since the signal can penetrate several metres into the seafloor, depending on substrate type. We present a case study illustrating how a non-targeted dataset may be used to derive information from multibeam backscatter data regarding distribution of substrate types. The results allow us to assess limitations associated with low frequency MBES where sub-bottom layering is present, and test the accuracy of automated supervised segmentation performed using SonarScope® software. This is done through comparison of predicted and observed substrate from backscatter facies-derived classes and substrate data, reinforced using quantitative statistical analysis based on a confusion matrix. We use sediment samples, video transects and sub-bottom profiles acquired on the Chatham Rise, east of New Zealand. Inferences on the substrate types are made using the Generic Seafloor Acoustic Backscatter (GSAB) model, and the extents of the backscatter classes are delineated by automated supervised segmentation. Correlating substrate data to backscatter classes revealed that backscatter amplitude may correspond to lithologies up to 4 m below the seafloor. Our results emphasise several issues related to substrate characterisation using backscatter classification, primarily because the GSAB model does not only relate to grain size and roughness properties of substrate, but also accounts for other parameters that influence backscatter. Better understanding these limitations allows us to derive first-order interpretations of sediment properties from automated supervised segmentation. 相似文献
10.
基于多波束背向散射强度信号的海底表层沉积物粒度分类研究——以澳洲Joseph Bonaparte湾为例 总被引：1，自引：0，他引：1
近海海底地形探测与沉积物精确分类对涉海工程建设、生物栖息地反演以及海底资源勘查与开发具有重要的现实意义。以澳洲Joseph Bonaparte湾为例，利用多波束测深技术获取了该海湾约880 km2水域的水深数据与背向散射强度信号，结合同步采集的54个海底表层沉积物样品，通过随机决策树模型对该海域海底表层沉积物进行了分类研究。结果表明:（1）利用随机决策树模型分析该海域沉积物类型与背向散射强度的关系时，当模型内部参数设置:树的总数为200，最小分裂节点为2，每棵树的最大分裂级数为5时，可提高预测准确率；（2）该参数设置下，利用13°和37°入射角的背向散射强度预测该海域沉积物类型时，准确率最高，其值为83.3%，且在研究海域，砂质砾和砾质砂分布在背向散射强度较强的深槽或海沟等地区，而砾质泥质砂和含砾泥质砂主要分布在背向散射强度较弱的浅水海域。分析还发现，当水深数据作为预测海底表层沉积物类型的特征变量时，有可能降低最终预测结果的准确率。 相似文献
11.
The EM12 multibeam echosounder can record acoustic backscatter information as well as high resolution bathymetry. The dataset presented, from the axis of the Mid-Atlantic Ridge at 45° N, was the first EM12 survey of a mid-ocean ridge. This paper presents methods for utilising the backscatter information. Data processing enables the production of a mosaic of acoustic backscatter, and visualisation techniques are investigated to provide initial qualitative views of the combined backscatter and bathymetry datasets. The co-registration of the backscatter and bathymetry data enables quantitative analysis of their relationships. Various sites of different geological type have been selected and their angular acoustic backscattering relationships estimated, including the effect on backscatter of incidence angle, its regional variability with bottom type and the influence of bottom slope. Incidence angles and bottom type are shown to affect backscatter to a similar degree, while slopes appear to contribute little. The geometry of hull-mounted systems, such as the EM12, is significantly different from that of conventional sidescan sonars, such as GLORIA, and the backscatter images from the two types differ in various respects. Because of the wide variations in incidence angle that are common with hull-mounted systems, and the importance of incidence angle in determining backscatter strength, it is vital to consider the effect of incidence angle during interpretation. 相似文献
12.
Multibeam echosounders are becoming widespread for the purposes of seafloor bathymetry mapping, but the acquisition and the use of seafloor backscatter measurements, acquired simultaneously with the bathymetric data, are still insufficiently understood, controlled and standardized. This presents an obstacle to well-accepted, standardized analysis and application by end users. The Marine Geological and Biological Habitat Mapping group (Geohab.org) has long recognized the need for better coherence and common agreement on acquisition, processing and interpretation of seafloor backscatter data, and established the Backscatter Working Group (BSWG) in May 2013. This paper presents an overview of this initiative, the mandate, structure and program of the working group, and a synopsis of the BSWG Guidelines and Recommendations to date. The paper includes (1) an overview of the current status in sensors and techniques available in seafloor backscatter data from multibeam sonars; (2) the presentation of the BSWG structure and results; (3) recommendations to operators, end-users, sonar manufacturers, and software developers using sonar backscatter for seafloor-mapping applications, for best practice methods and approaches for data acquisition and processing; and (4) a discussion on the development needs for future systems and data processing. We propose for the first time a nomenclature of backscatter processing levels that affords a means to accurately and efficiently describe the data processing status, and to facilitate comparisons of final products from various origins. 相似文献
13.
多波束与侧扫声纳海底目标探测的比较分析 总被引：2，自引：0，他引：2
侧扫声纳是目前常用的海底目标(如沉船、水雷、管线等)探测工具,在测深领域,多波束以全覆盖和高效率证明了它的优越性。由于多波束具有很高的分辨率,目前在工程上已经开始应用多波束进行海底目标物的探测。对多波束和侧扫声纳进行了比较分析,并着重探讨了影响多波束分辨率的各种因素。结果表明:多波束的最大优点在于定位精度高,但其适用范围不如侧扫声纳广泛,尤其受到水深和波束角的限制,多波束和侧扫声纳在探测海底目标时具有很好的互补性,同时应用可以提高目标解译的准确性。 相似文献
14.
The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed. 相似文献
15.
Seafloor acoustic remote sensing with multibeam echo-sounders and bathymetric sidescan sonar systems 总被引：5，自引：0，他引：5
This paper examines the potential for remote classification of seafloor terrains using a combination of quantitative acoustic backscatter measurements and high resolution bathymetry derived from two classes of sonar systems currently used by the marine research community: multibeam echo-sounders and bathymetric sidescans sonar systems. The high-resolution bathymetry is important, not only to determine the topography of the area surveyed, but to provide accurate bottom slope corrections needed to convert the arrival angles of the seafloor echoes received by the sonars into true angles of incidence. An angular dependence of seafloor acoustic backscatter can then be derived for each region surveyed, making it possible to construct maps of acoustic backscattering strength in geographic coordinates over the areas of interest. Such maps, when combined with the high-resolution bathymetric maps normally compiled from the data output by the above sonar systems, could be very effective tools to quantify bottom types on a regional basis, and to develop automatic seafloor classification routines. 相似文献
16.
Digital filters designed using wavelet theory are applied to high resolution deep-towed side-scan sonar data from the median valley walls, crestal mountains, and flanks of the Mid-Atlantic Ridge at 29°10 N. With proper tuning, the digital filters are able to identify the location, orientation, length, and width of highly reflective linear features in sonar images. These features are presumed to represent the acoustic backscatter from axis-facing normal faults. The fault locations obtained from the digital filters are well correlated with visual geologic interpretation of the images. The side-scan sonar images are also compared with swath bathymetry from the same area. The digitally filtered bathymetry images contain nine of the eleven faults identified by eye in the detailed geologic interpretation of the side-scan data. Faults with widths (measured perpendicular to their strike) of less than about 150 m are missed in the bathymetry analysis due to the coarser resolution of these data. This digital image processing technique demonstrates the potential of wavelet-based analysis to reduce subjectivity and labor involved in mapping and analyzing topographic features in side-scan sonar and bathymetric image data. 相似文献
17.
18.
Seagrass and seaweed beds play important roles in coastal marine ecosystems. They are food sources and habitats for many marine organisms, and influence the physical, chemical, and biological environment. They are sensitive to human impacts such as reclamation and pollution. Therefore, their management and preservation are necessary for a healthy coastal environment. Satellite remote sensing is a useful tool for mapping and monitoring seagrass beds. The efficiency of seagrass mapping, seagrass bed classification in particular, has been evaluated by mapping accuracy using an error matrix. However, mapping accuracies are influenced by coastal environments such as seawater transparency, bathymetry, and substrate type. Coastal management requires sufficient accuracy and an understanding of mapping limitations for monitoring coastal habitats including seagrass beds. Previous studies are mainly based on case studies in specific regions and seasons. Extensive data are required to generalise assessments of classification accuracy from case studies, which has proven difficult. This study aims to build a simulator based on a radiative transfer model to produce modelled satellite images and assess the visual detectability of seagrass beds under different transparencies and seagrass coverages, as well as to examine mapping limitations and classification accuracy. Our simulations led to the development of a model of water transparency and the mapping of depth limits and indicated the possibility for seagrass density mapping under certain ideal conditions. The results show that modelling satellite images is useful in evaluating the accuracy of classification and that establishing seagrass bed monitoring by remote sensing is a reliable tool.
相似文献19.
20.
Evangelos Alevizos Mirjam Snellen Dick Simons Kerstin Siemes Jens Greinert 《Marine Geophysical Researches》2018,39(1-2):289-306
This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r2?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings. 相似文献