共查询到20条相似文献，搜索用时 390 毫秒
1.
2.
双功能潜水器是目前国际上比较新型的可用于深海水下观察和作业的装备。既可有缆载人／无人，又可无缆载人。该潜水器最大工作深度450m，其结构材料和结构形式与以往类似的装备不同。文章对双功能潜水器耐压壳结构和载体框架设计中的一些问题进行了探讨，提出的设计思想和计算方法，这对获得一个具有最轻结构重量的实用的双功能潜水器结构具有指导意义。 相似文献
3.
4.
This paper describes an underwater 3500 m electric manipulator (named Huahai-4E,stands for four functions deep ocean electric manipulator in China),which has been developed at underwater manipulation technology lab in Huazhong University of Science and Technology (HUST) for a test bed of studying of deep ocean manipulation technologies.The manipulator features modular integration joints,and layered architecture control system.The oil-filled,pressure-compensated joint is compactly designed and integrated of a permanent magnet (PM) brushless motor,a drive circuit,a harmonic gear and an angular feedback potentiometer.The underwater control system is based on a network and consisted of three embedded PC/104 computers which are used for servo control,task plan and target sensor respectively.They communicate through User Datagram Protocol (UDP) multicast communication in Vxworks OS.A supervisor PC with a virtual 3D GUI is fiber linked to underwater control system.Furthermore,the manipulator is equipped with a sensor system including a unique ultra-sonic probe array and an underwater camera.Autonomous grasp strategy based multi-sensor is studied.The results of watertight test in 40 MPa,joint’s efficiency test and autonomous grasp experiments in tank are also presented. 相似文献
5.
为实现长期、连续、定点、低成本的上层海洋垂直剖面要素的准实时观测,提出了一种以STM32单片机(microcontroller unit,MCU)为主控器、采用国产温盐深传感器(conductivity temperature depth,CTD)和声学多普勒剖面流速仪(acoustic doppler current profilers,ADCP)等仪器进行剖面观测、搭载铱星通信模块或其他通信设备、适用于近海和远海的低功耗水下升降式准实时通信潜标控制系统设计方案。介绍了潜标的结构组成、控制系统硬件和软件设计,以及服务器接收软件的设计;实现了基于无线双向通信的数据补发机制和对潜标的远程控制;提出了一种适用于霍尔无刷直流电机(hall brushless direct current motor,HBLDCM)的堵转保护方法。近海和远海试验表明,该型潜标可以实现海洋垂直剖面的连续观测和数据的准实时传输,验证了潜标控制系统设计方案的可行性与稳定性。 相似文献
6.
7.
Robust diving control of an AUV 总被引：1，自引：0，他引：1
Lionel Lapierre 《Ocean Engineering》2009,36(1):92-104
Mobile systems traveling through a complex environment present major difficulties in determining accurate dynamic models. Autonomous underwater vehicle motion in ocean conditions requires investigation of new control solutions that guarantee robustness against external parameter uncertainty. A diving-control design, based on Lyapunov theory and back-stepping techniques, is proposed and verified. Using adaptive and switching schemes, the control system is able to meet the required robustness. The results of the control system are theoretically proven and simulations are developed to demonstrate the performance of the solutions proposed. 相似文献
8.
抛载系统是水下机器人安全工作的核心关键部分。以“思源号”全海深ARV（自治缆控水下机器人）为研究对象，开展ARV作业过程中压载水下释放问题研究。通过在ARV底盘下侧布置下潜抛载模块，上艇体两侧对称布置上浮抛载模块，设计了一套基于电磁驱动的超高压水下抛载系统。利用Maxwell 2D电磁场有限元分析软件对非接触式电磁铁作了静磁场数值分析，得到电磁铁的磁力线与磁通密度分布图，验证了抛载电磁铁可以满足压载吸附和抛弃的功能。设计了一种非磁性钛合金隔离片，用于消除电磁铁断电后存在的吸附效应，解决了抛载失败的问题。开展了电磁吸力测试、可靠性试验、超高压试验以及深海试验，试验结果验证了所设计的全海深ARV抛载系统能够在深海环境下实现水下释放压载，为全海深ARV实现上浮下潜和水下浮态控制提供重要保障。 相似文献
9.
Design of a sliding mode fuzzy controller for the guidance and control of an autonomous underwater vehicle 总被引：1，自引：0，他引：1
This work demonstrates the feasibility of applying a sliding mode fuzzy controller to motion control and line of sight guidance of an autonomous underwater vehicle. The design method of the sliding mode fuzzy controller offers a systematical means of constructing a set of shrinking-span and dilating-span membership functions for the controller. Stability and robustness of the control system are guaranteed by properly selecting the shrinking and dilating factors of the fuzzy membership functions. Control parameters selected for a testbed vehicle, AUV-HM1, are evaluated through tank and field experiments. Experimental results indicate the effectiveness of the proposed controller in dealing with model uncertainties, non-linearities of the vehicle dynamics, and environmental disturbances caused by ocean currents and waves. 相似文献
10.
A three-dimensional model of a two-part underwater towed system is studied. In the model, the governing equations of cables are established based on the Ablow and Schechter method. The boundary conditions for the two-part underwater towed system are derived. The six-degrees-of-freedom equations of motion for submarine simulations are adopted to predict the hydrodynamic performance of a towed vehicle. The established governing equations for the system are then solved using a central finite difference method. In this paper several algorithms are used to solve this special form of finite difference equations. The results in this paper indicate that the two-part underwater towed system improves the dynamic behavior of the towed vehicle and is an easy way to decouple the towing ship motion from the towed vehicle. Because the model uses an implicit time integration, it is stable for large time steps and is an effective algorithm for simulation of a large-scale underwater towed system. 相似文献
11.
海洋机器人具有观测范围大、作业灵活、机动性好、可控性强等突出优点,在海洋科学观测与海洋科学实验中发挥了重要作用,促进了物理海洋和海洋生物地球化学的发展。为阐明海洋机器人在海洋科学观测和实验中的应用情况,以水下滑翔机、自主水下机器人（Autonomous Underwater Vehicle,AUV）和无人帆船3种典型的观测型海洋机器人为例介绍了海洋机器人在海洋科学观测中的应用现状;以原位采样与固定、原位培养与分析海洋机器人为例介绍了海洋机器人在海洋科学实验中的应用现状;最后结合未来海洋科学研究需求,从需求牵引的角度对基于机器人的科学观测与实验系统的发展趋势进行了展望。 相似文献
12.
基于模糊神经网络理论对水下拖曳体进行深度轨迹控制 总被引：2，自引：0，他引：2
以华南理工大学开发的自主稳定可控制水下拖曳体为研究对象,首先通过水下拖曳体在拖曳水池样机中的试验取得试验数据后作为训练样本,采用LM BP算法,建立基于神经网络理论构建的可控制水下拖曳体轨迹与姿态水动力的数值模型。在此基础上设计了一个控制系统,它主要由两部分组成:基于遗传算法的神经网络辨识器和基于模拟退火改进的遗传算法的模糊神经网络控制器。以满足预先设定的拖曳体水下监测轨迹要求为控制依据,由控制系统确定为达到所要求的运动轨迹而应采用的迫沉水翼转角,以此作为输入参数,通过LM BP神经网络模型的模拟计算预报在这一操纵动作控制下的拖曳体所表现的轨迹与姿态特征。数值模拟计算结果表明:该系统的设计达到了所要求的目的;借助这一系统,可以有效地实现对拖曳体的深度轨迹控制。 相似文献
13.
A hydrodynamic model of a two-part underwater manoeuvrable towed system is proposed in which a depressor is equipped with active horizontal and vertical control surfaces, and a towed vehicle is attached to the lower end of a primary cable. In such a system the towed vehicle can be manoeuvred in both vertical and horizontal planes when it is towed at a certain velocity and the coupling effect of excitations at the upper end of the primary cable and disturbances of control manipulations to the towed vehicle can be reduced. In the model the hydrodynamic behavior of an underwater vehicle is described by the six-degrees-of-freedom equations of motion for submarine simulations. The added masses of an underwater vehicle are obtained from the three-dimensional potential theory. The control surface forces of the vehicle are determined by the wing theory. The results indicate that with relative simple control measures a two-part underwater manoeuvrable towed system enables the towed vehicle to travel in a wide range with a stable attitude. The method in this model gives an effective numerical approach for determining hydrodynamic characteristics of an underwater vehicle especially when little or no experimental data are available or when costs prohibit doing experiments for determining these data. 相似文献
14.
Many underwater intervention tasks are today performed using manned submersibles or remotely operated vehicles in teleoperation mode. Autonomous underwater vehicles are mostly employed in survey applications. In fact, the low bandwidth and significant time delay inherent in acoustic subsea communications represent a considerable obstacle to remotely operate a manipulation system, making it impossible for remote controllers to react to problems in a timely manner.Nevertheless, vehicles with no physical link and with no human occupants permit intervention in dangerous areas, such as in deep ocean, under ice, in missions to retrieve hazardous objects, or in classified areas. The key element in underwater intervention performed with autonomous vehicles is autonomous manipulation. This is a challenging technology milestone, which refers to the capability of a robot system that performs intervention tasks requiring physical contacts with unstructured environments without continuous human supervision.Today, only few AUVs are equipped with manipulators. SAUVIM (Semi Autonomous Underwater Vehicle for Intervention Mission, University of Hawaii) is one of the first underwater vehicle capable of autonomous manipulation.This paper presents the solutions chosen within the development of the system in order to address the problems intrinsic to autonomous underwater manipulation. In the proposed approach, the most noticeable aspect is the increase in the level of information transferred between the system and the human supervisor.We describe one of the first trials of autonomous intervention performed by SAUVIM in the oceanic environment. To the best knowledge of the authors, no sea trials in underwater autonomous manipulation have been presented in the literature. The presented operation is an underwater recovery mission, which consists in a sequence of autonomous tasks finalized to search for the target and to securely hook a cable to it in order to bring the target to the surface. 相似文献
15.
为提高我国水下地形地貌探测技术水平,促进对海洋的科学认知和高效开发利用,文章综述高精度和高分辨率水下地形地貌探测技术研发进展,并分析关键技术发展方向。研究结果表明:采用机载激光、多波束、侧扫声呐、浅地层剖面、双频识别声呐、合成孔径声呐和水下三维扫描声呐等探测技术以及无人船、水下机器人和海底观测网等探测平台,可获取高精度和高分辨率水下地形地貌信息;应在提高设备性能、减小探测误差和完善数据算法等方面加大研究力度,重点发展综合探测技术,从而全面和清晰地反映水下地形地貌。 相似文献
16.
17.
Carl T.F. Ross 《Ocean Engineering》2006,33(16):2087-2104
The paper presents a conceptual design of an underwater star wars’ system, which will be more difficult to detect by the enemy than a recently proposed ‘surface’ star wars’ system.The paper suggests that for the proposed structures needed for the underwater star wars’ system, the material of construction should be a composite and not a metal, as use of the latter for large deep diving underwater vessels will result in such structures sinking to the bottom of the ocean like stones, due to the fact that they will have no reserve buoyancy. The paper also shows that composites have better sound absorption characteristics, thereby making the underwater structures difficult to detect through sonar equipment. It is proposed that these underwater structures should operate up to a depth of 7.16 miles (11.52 km), as at this depth, all of the oceans’ bottoms can be reached.The author shows that current technology can be used to construct and operate such vessels, but more progress needs to be made with metal matrix and ceramic composites, so that the hulls of underwater missiles and torpedoes can be constructed in these materials. 相似文献
18.
Depth-trim mapping control of underwater vehicle with fins 总被引：1，自引：1，他引：0
Underwater vehicle plays an important role in ocean engineering.Depth control by fin is one of the difficulties for underwater vehicle in motion control.Depth control is indirect due to the freedom coupling between trim and axial motion.It includes the method of dynamic analysis and lift-resistance-coefficient experiment and theory algorithm.By considering the current speed and depth deviation,comprehensive interpretation is used in object-planning instruction.Expected depth is transformed into expected trim.Dynamic output fluctuation can be avoided,which is caused by linear mapping of deviation.It is steady and accurate for the motion of controlled underwater vehicles.The feasibility and efficiency of the control method are testified in the pool and natural area for experiments. 相似文献
19.
The paper addresses the problem of autonomous underwater vehicle (AUV) modelling and parameter estimation as a means to predict the dynamic performance of underwater vehicles and thus provide solid guidelines during their design phase. The use of analytical and semi-empirical (ASE) methods to estimate the hydrodynamic derivatives of a popular class of AUVs is discussed. A comparison is done with the results obtained by using computational fluid dynamics to evaluate the bare hull lift force distribution around a fully submerged body. An application is made to the estimation of the hydrodynamic derivatives of the MAYA AUV, an autonomous underwater vehicle developed under a joint Indian-Portuguese project. The estimates obtained were used to predict the turning diameter of the vehicle during sea trials. 相似文献
20.
水下机器人作为一类特种机器人,日益成为探索海洋奥秘、开发海洋资源的重要工具,被称为海洋高技术的皇冠,正逐步成为国家间海洋技术竞争的制高点。水下机器人标准体系最直接的作用是指导、规范水下机器人标准制定工作,使人们清楚水下机器人标准化工作方向和重点,有助于推动水下机器人研发和产业化进程,促进快速、健康发展。文章在介绍国内外水下机器人标准制订的基础上,探讨水下机器人标准体系框架构建思路,提出标准体系建设路径,明确水下机器人标准化工作范围和领域,并构建了水下机器人标准体系序列结构、三维结构、层次结构3种框架模型,为构建我国水下机器人标准体系提供了有价值的参考。 相似文献