共查询到18条相似文献，搜索用时 265 毫秒
1.
比例边界有限元法(SBFEM)是一种半解析数值分析的新方法,既融合了有限元法和边界元法的优点,又有其特有的优点。用该方法可求解有限水深下狭缝对双箱水动力作用的影响,为波浪与多浮体超大型结构的相互作用探索一些规律。整个计算域划分成2个无限子域和4个有限子域,并利用加权余量法在各个子域上推导了SBFEM的积分方程;计算了4个数值算例并与边界元等其它数值方法进行了比较,验证了该方法是一种用很少单元便能得到精确结果的高效方法。应用SBFEM对不同箱体宽度、不同狭缝宽度、不同吃水深度条件的双箱作了计算,得出了狭缝对双箱水动力干涉影响的一些规律,对超大型浮体水动力分析和结构设计具有一定的参考价值。 相似文献
2.
箱式超大型浮体结构在规则波中的水弹性响应研究 总被引：3，自引：5，他引：3
利用三维线性水弹性理论研究了箱式超大型浮体结构在正弦规则波中的动力响应，用Bernoulli-Euler梁解析解计算结构在真空中的动力特性，用弹性体三维势流理论计算结构的水动力系数，浮体结构在单位波幅规则波中的刚体运动幅值与DNV／WADAM程序的计算结果进行了比较，并给出了垂向弯曲模态的位移，弯矩随波浪频率的变化规律，由于箱式浮体结构的低阶固有频率很低，相应的弹性振型的响应与刚体运动耦合，结构在波浪中没有发现明显的低阶弹性模态谐振。 相似文献
3.
4.
5.
实际工程中存在大量的曲边界,因此在曲边界上的计算准确性可以考察出一个数值模型的实用价值。利用Beji的改进型Boussinesq方程建立了一个有限元方法的数值波浪模型。造波方面采用Fenton提出的非线性规则波浪解;在墙边界处,以求解法线方向和切线方向的速度和导数代替求解x、y方向的速度和导数,从而使边界条件直接适用、严格满足,保证了对曲边界计算的准确性。"重开始广义极小残量法"的使用保证了求解方程组的效率和精度,使造波和边界处理方法的有效性和准确性得到了合理地诠释。通过与试验数据、他人数值结果、解析解的比对,显示出该模型计算稳定、结果准确,真正体现出了有限元方法对曲边界适用的优势。 相似文献
6.
7.
不同干结构模型对箱式超大型浮体结构水弹性响应的影响 总被引：1，自引：7，他引：1
三维线性水弹性力学利用结构在真空中弹性振型的正交性 ,对结构振动进行模态分析 ,用弹性体三维势流理论计算结构的水动力系数。因此 ,结构的干模态计算是十分重要的。应用三维线性水弹性理论研究箱式超大型浮体结构在波浪中的动力响应时 ,分别采用梁模型和三维空间有限元模型计算结构的干模态 ,并且采用同样的水动力模型 (弹性体三维势流理论 )研究了不同干结构模型对结构水弹性响应的影响 相似文献
8.
波浪漫滩是近岸波浪的小尺度运动,在实际海域的波生流数值计算中通常被忽略。本文基于Boussinesq方程的FUNWAVE模式,分别采用波浪漫滩边界、固壁边界、海绵边界进行Haller波浪港池物理模型实验的数值模拟,比较三种边界计算结果与实验观测数据的误差,检验波浪漫滩边界对波生流数值计算的影响;然后设计了多种周期、波高的波生流数值模拟试验,分析多种波浪入射条件下波浪漫滩边界对近岸波生流数值计算的影响。结果表明,波浪漫滩对邻近区域波生流有明显影响,漫滩边界下的波生流计算结果更接近实验观测值,在近岸波生流数值模型中引入波浪漫滩边界可以提高波生流计算精度。 相似文献
9.
波能装置-浮式防波堤是将浮式防波堤与波能转换装置集成，兼具防波消浪和捕获波浪能的集成装置，能够有效降低单一功能波能转换装置的成本。研究者们提出了许多波能装置-浮式防波堤的结构型式，其中非对称式浮体结构相比于对称式浮体结构，在单向入射波的水动力性能方面拥有一定的优势。本文针对导桩锚泊的非对称式方箱-三角形挡浪板和方箱-垂直挡浪板两种浮体结构型式，通过数值模拟的方式，对比分析其水动力特性和波能俘获特性。数值模型基于黏性流体理论，以Navier-Stokes方程为控制方程，并采用VOF方法和浸没边界法求解自由面边界和流固耦合作用，探究不同入射波周期、水深和浮体排水条件下集成装置水动力性能（消波特性、能量耗散特性和波能俘获特性）变化趋势。结果表明，在近岸波浪条件下（5～8 s），垂直挡板型式集成装置适用于较小周期波浪（5～6 s），而三角挡板型式集成装置适用于较大周期波浪（6～7.5 s）。随着水深增大，波能俘获比总体上呈现缓慢增长的趋势。在主浮体吃水相同的情况下（排水量不同），两种结构的透射系数基本一致；而在排水量相同（主浮体吃水不同）的情况下，垂直挡板结构型式的防波效果更好，三角挡板结构型... 相似文献
10.
11.
The scaled boundary finite element method （SBFEM） is a novel semi-analytical technique combining the advantage of the finite element method （FEM） and the boundary element method （BEM） with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method （DBEM）, it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study. 相似文献
12.
《Applied Ocean Research》2005,27(4-5):224-234
The modified scaled boundary finite-element method (SBFEM), keeping the advantages of the original SBFEM, eliminates the restriction of the scaling center location so that this approach can solve two-dimensional problems with parallel side-faces. In this paper, the modified SBFEM is applied to solutions of two types of problems—wave diffraction by a single and twin surface rectangular obstacles and wave radiation induced by an oscillating mono-hull and twin-hull structures in a finite depth of water. For wave diffraction problems, numerical results agree extremely well with the analytic solution for the single obstacle case and other numerical results of a different approach for the twin obstacle case. For wave radiation problems, the particular solutions to the scaled boundary finite-element equation are presented for cases of heave, sway and roll motions. The added mass and damping coefficients for heave, sway and roll motions of a two-dimensional rectangular container are computed and the numerical results are compared with those from independent analytical solution and numerical solution using the boundary element method (BEM). It is found that the SBFEM method achieves equivalent accuracy to the conventional BEM with only a few degrees of freedom. In the last example, wave radiation by a two-dimensional twin-hull structure is analyzed. Comparisons of the results with those obtained using conventional Green's function method (GFM) demonstrate that the method presented in this paper is free from the irregular frequency problems. 相似文献
13.
In this paper, based on the linear wave theory, the interaction of short-crested waves with a concentric dual cylindrical system with a partially porous outer cylinder is studied by using the scaled boundary finite element method (SBFEM), which is a novel semi-analytical method with the advantages of combining the finite element method (FEM) with the boundary element method (BEM). The whole solution domain is divided into one unbounded sub-domain and one bounded sub-domain by the exterior cylinder. By weakening the governing differential equation in the circumferential direction, the SBFEM equations for both domains can be solved analytically in the radial direction. Only the boundary on the circumference of the exterior porous cylinder is discretized with curved surface finite elements. Meanwhile, by introducing a variable porous-effect parameter G, non-homogeneous materials caused by the complex configuration of the exterior cylinder are modeled without additional efforts. Comparisons clearly demonstrate the excellent accuracy and computational efficiency associated with the present SBFEM. The effects of the wide range wave parameters and the structure configuration are examined. This parametric study will help determine the various hydrodynamic effects of the concentric porous cylindrical structure. 相似文献
14.
Stress intensity factors (SIFs) for the cracked circular disks under different distributing surface tractions are evaluated with the scaled boundary finite element method (SBFEM). In the SBFEM, the analytical advantage of the solution in the radial direction allows SIFs to be directly determined from its definition, therefore no special crack-tip treatment is necessary. Furthermore anisotropic material behavior can be treated easily. Different distributions of surface tractions are considered for the center and double-edge-cracked disks. The benchmark examples are modeled and an excellent agreement between the results in the present study and those in published literature is found. It shows that SBFEM is effective and possesses high accuracy. The SIFs of the cracked orthotropic material circular disks subjected to different surface tractions are also evaluated. The technique of substructure is applied to handle the multiple cracks problem. 相似文献
15.
The behavior of a highly deformable membrane to ocean waves was studied by coupling a nonlinear boundary element model of the fluid domain to a nonlinear finite element model of the membrane. The hydrodynamic loadings induced by water waves are computed assuming large body hydrodynamics and ideal fluid flow and then solving the transient diffraction/radiation problem. Either linear waves or finite amplitude waves can be assumed in the model and thus the nonlinear kinematic and dynamic free surface boundary conditions are solved iteratively. The nonlinear nature of the boundary condition requires a time domain solution. To implicitly include time in the governing field equation, Volterra's method was used. The approach is the same as the typical boundary element method for a fluid domain where the governing field equation is the starting point. The difference is that in Volterra's method the time derivative of the governing field equation becomes the starting point.The boundary element model was then coupled through an iterative process to a finite element model of membrane structures. The coupled model predicts the nonlinear interaction of nonlinear water waves with highly deformable bodies. To verify the coupled model a large scale test was conducted in the OH Hinsdale wave Research Laboratory at Oregon State University on a 3-ft-diameter fabric cylinder submerged in the wave tank. The model data verified the numerical prediction of the structure displacements and of the changes in the wave field.The boundary element model is an ideal modeling technique for modeling the fluid domain when the governing field equations is the Laplace equation. In this case the nonlinear boundary element model was coupled with a finite element model of membrane structures, but the model could have been coupled with other finite element models of more rigid structures, such as a pontoon floating breakwater. 相似文献
16.
Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses 总被引：1，自引：0，他引：1
Byoung Wan Kim Sa Young Hong Jo Hyun Kyoung Seok Kyu Cho 《Ocean Engineering》2007,34(11-12):1668-1679
This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed. 相似文献
17.
In this study, we develop a numerical method for a 3D linear hydroelastic analysis of floating structures with liquid tanks subjected to surface regular water waves and compare the numerical results with experimental tests. Considering direct couplings among structural motion, sloshing, and water waves, a mathematical formulation and a numerical method extended from a recent work [1] are developed. The finite element method is employed for the floating structure and internal fluid in tanks, and the boundary element method is used for the external fluid. The resulting formulation completely incorporates all the interaction terms including hydrostatic stiffness and the irregular frequency effect is removed by introducing the extended boundary integral equations. Through various numerical tests, we verify the proposed numerical method. We also performed 3D hydroelastic experimental tests of a floating production unit (FPU) model in an ocean basin. The measured dynamic motions are compared with the numerical results obtained using the proposed method. 相似文献
18.
Although the finite difference method is computationally efficient, it is acknowledged to be inferior when dealing with flow-over on structures with a complex geometry because of its rectilinear grid system. Therefore, we developed a numerical procedure that can cope with flow over structures with complex shapes while, at the same time, retaining the simplicity and efficiency of a rectilinear grid system. We used the immersed boundary method, which involves application of immersed boundary forces at solid boundaries rather than conventional boundary conditions, to investigate wave interactions with coastal structures in a three-dimensional numerical wave tank by solving the Navier–Stokes equations for two-phase flows. We simulated the run-up of a solitary wave around a circular island. Maximum run-up heights were computed around the island and compared with available laboratory measurements and previous numerical results. The three-dimensional features of the run-up process were analyzed in detail and compared with those of depth-integrated equations models. 相似文献