共查询到18条相似文献，搜索用时 93 毫秒
1.
2.
采用计算流体动力学(CFD)方法,基于RANS方程和SST k-ω湍流模型,对OC3-Hywind Spar浮式平台支撑的NREL5 MW风机进行气动性能模拟。对固定式风机的数值模型做网格无关性验证,同时考虑垂直风切变的影响,并将数值结果与NREL设计数据进行对比以验证模型的有效性。在FLUENT软件中,设定嵌入式滑移网格和用户定义程序(UDF)来模拟风机叶轮随平台的周期运动,分别研究浮式平台的纵荡、纵摇和首摇运动对风机气动荷载的影响。数值结果表明平台的纵荡和纵摇运动对输出功率影响较大,且平台运动幅值越大周期越低,其气动荷载变化越剧烈。合理控制平台的运动幅值对提高浮式风机的发电性能和疲劳强度有很大作用。 相似文献
3.
4.
自升式钻井平台在设计时通常不考虑冰荷载的作用，要实现冰区作业，首先需要对该类平台的抗冰能力进行准确评估。本文通过开展冰池试验，对自升式钻井平台冰载荷作用机理、结构冰激特性以及抗冰方法等进行研究。海洋结构受到的冰荷载大小以及结构响应值与冰厚密切相关，冰激振动机理与冰厚无关，探究不同冰速和冰厚下冰荷载及振动响应的时程曲线，可发现低冰速下结构展现出的准静态响应特征以及高冰速下的随机响应特征。冰激振动的发生是结构固有特性、冰速、冰厚、冰材料参数等因素共同影响的结果，其作用机理尤为复杂，本研究侧重于桁架式自升式平台冰区作业中结构冰激振动特性研究。 相似文献
5.
基于多数专业风机数值模拟软件只可进行一阶波浪荷载计算这一缺点,文中将以AQWA为基础,利用其可进行二次开发的技术优势,通过实时调用风机气动荷载,实现海上TLP浮式风机分析。分析中,浮式风机平台一阶、二阶波浪荷载由AQWA计算,实时调用的气动荷载由动态链接库提供。该动态链接库主要包含了根据叶素动量定理自行编译的气动荷载计算程序。经过与FAST比较,得知该方法能满足分析需求。垂荡、纵摇力的二阶效应尤为明显。仅计算浮式风机平台波浪荷载时,可以不考虑风荷载的影响,但必须考虑平台运动的影响,波浪荷载主要受纵荡、纵摇运动影响,几乎不受垂荡运动的影响;当研究浮式风机平台运动时,必须考虑风荷载和二阶波浪荷载的影响,二阶波浪荷载使得平台响应在整个频率范围内都明显增大。张力筋腱张力受二阶波浪荷载的作用更明显。 相似文献
6.
7.
探讨SPAR平台在波流组合作用下的运动响应机理。运用Matlab程序分析了SPAR平台产生内共振的运动过程,运用刚体动力学理论建立了平台垂荡-纵摇耦合方程,对波流共同作用下Spar平台的垂荡、纵摇运动进行数值模拟,结果表明:流的加入对于内共振的影响并不明显;同时采用AQWA软件研究了流的加入对于纵荡二阶慢漂力的影响,研究发现,当波流同向时能大大增加Spar平台的纵荡运动,而波流反向时却能明显削弱纵荡运动。本文研究成果对于指导深海浮式结构设计开发具有一定的理论借鉴作用。 相似文献
8.
以由不同直径、杆件方向和长度的圆柱形水下杆件构成的桁架式近海结构物为对象,提出了考虑流固耦合的结构物波浪栽荷和动力响应的数值分析方法:首先逐一计算组成桁架式结构的每一杆件的渡浪力,然后对这些单一杆件的波浪力进行叠加来得到结构物的整体渡浪载荷.同时利用时域分析方法求解结构物的动力响应.算例表明:与考虑流固耦合情况下的平台波浪载荷和动力响应计算结果对比,忽略辅助杆件响应贡献的计算结果与之存在较大差异;不考虑流固耦舍情况下的计算结果在结构物的固有周期附近与之差异较大,在远离固有周期的区间则差剐不大.对平台进行分析时有必要记入辅助杆件的响应贡献.并且考虑流固耦合的影响. 相似文献
9.
针对35万立方米超大型LNG-FSRU,采用软刚臂单点系泊系统定位方式,运用模型试验与数值计算两种技术手段开展风、浪、流联合作用下水动力研究。软刚臂系泊系统各构件间的连接方式及Yoke重量模拟是数值计算与模型试验的关键,数值计算对构件间的铰接方式与Yoke重量进行模拟,模型试验同样模拟了系泊系统的相似性,并将数值计算结果与模型试验结果进行对比分析。结果表明,软刚臂系泊系统刚度曲线呈非线性,试验结果与数值结果吻合良好,表明对于软刚臂系泊系统的两种模拟是合理的,反映了LNG-FSRU在风、浪、流联合作用下的运动特性,建立的研究方法可用于软刚臂系统的水动力研究。 相似文献
10.
近年来,深水半潜平台已成为海洋工程领域研究的热点。分别通过模型试验和数值模拟的方法,对不同水深和浪向条件下作业的深水半潜平台的运动以及系泊系统的受力进行全面分析。在此基础上,进一步研究平台在深水作业时的运动和动力特性,以及水深和环境海况的变化对平台运动和系泊系统受力的影响规律。同时,对比完整系泊系统的情况,对一根系泊缆破断的极端状态下平台的特性开展研究,获得运动和系泊系统受力的变化规律。对比发现试验和数值的结果能较好地相互吻合,且均能满足相应的安全度要求,保证平台实际作业时的可靠性,为深水半潜平台设计中的安全极限计算提供一定的依据。 相似文献
11.
随着海上风能的开发向深水发展，支撑风机的载体平台越来越受到关注。在经济性与安全性、稳定性的多重要求下，张力腿平台（TLP）在海洋风能资源的开发中体现出了重要地位。采用基于开源平台OpenFOAM开发的计算流体动力学（CFD）水动力学求解器naoe-FOAM-SJTU对一座处于中等水深下的风机基础水下TLP（STLP）的运动响应进行了数值模拟与研究。文中使用弹簧锚链模型模拟STLP的垂向系泊锁链系统，模拟该平台在不同波浪环境下的运动响应情况。首先将STLP单自由度自由衰减CFD模拟结果与已有全耦合时域分析结果进行对比，验证了naoe-FOAM-SJTU求解器及使用弹簧模型模拟STLP系泊系统的准确性与可靠性。随后在考虑非线性波浪载荷的情况下研究极端海况下与一般作业海况下STLP的运动响应情况，计算工况中的风机基础所受弯矩及锚链受力情况，并详细展示流场、速度场信息，分析高阶波浪成分、不同海况等条件对于STLP运动性能的影响。研究结果表明，TLP在中等水深中具有良好的运动性能，naoe-FOAM-SJTU求解器可以有效模拟水中生产平台在波浪环境下的水动力问题，并可以对整个流场进行可视化展示与分析。 相似文献
12.
This paper presents the research on the external mechanism of collision characters for a SPAR platform. The collision characters of SPAR platform have not attracted so much attention as that of ships in the past, because short of this kind of collision accidents reported. But with the increasing number of SPAR platforms in the world, the possibility of such kind of accident also increases. Therefore, it is necessary to master the character of SPAR collision. Model test technique is employed to study the external mechanism. The collision scenario is a ship colliding with a SPAR platform moored in the site with 1500 meters water depth. The striking ship hits the SPAR platform on the hard tank near water surface in its longitudinal direction. The specifics of the SPAR＇s motions and the tension forces of the mooring lines are collected to summarize the hydrodynamic characters in the collision scenario. It is found that the maximal displacements and the maximal pitch angles of the SPAR platform, and the maximal tension forces of mooring lines are all linearly proportional to the initial velocity of the striking ship basically. Mooring lines play elastic roles in the collision course. 相似文献
13.
布设间距对人工鱼礁流场效应影响的数值模拟 总被引：10，自引：0，他引：10
人工鱼礁在海中不同的布局方式会产生不同的流场效应.通过水槽与风洞模型实验很难对组合鱼礁流场全局进行观测,为此提出1种基于CFD原理的人工鱼礁流场特性的计算机数值模拟方法,模拟了不同流速条件下布设间距对方形组合礁体流场效应的影响.结果表明:数值模拟较好地反映了人工鱼礁周围上升流和背涡流的分布情况;当两礁体布设间距为1.5倍礁体尺寸时,所产生的上升流高度达到最大值;当布设间距为1倍/时,其上升流的影响面积为最大;当布设间距为1.5倍时所产生的背涡流效果最好;两礁体之间的最佳布设间距应为礁体尺寸的1～1.5倍.数值模拟结果与风洞实验结果基本相符,该结论可为人工鱼礁实际投放提供理论参考. 相似文献
14.
《中国海洋工程》2020,(3)
Modified suction caissons (MSCs) acting as offshore wind turbine foundations will generate the accumulated rotation under cyclic loading resulted from waves. The accumulated rotation and the range of soil deformation around the MSC under long-term cyclic wave loading were studied using 3-D numerical simulations. The Morison equation was adopted to calculate the wave loadings. It was found that the MSC accumulated rotation increases linearly with the increase of the logarithm of cyclic number. The normalized expression was proposed to reflect the relationship between the accumulated rotation and cyclic number. The soil deformation range around the MSC increases when increasing the cyclic number and loading amplitude. It can also be concluded that the accumulated rotation increases rapidly with this change of excess pore pressure in the first 4000 cycles. The responses of the MSC to wave and wind loads were also investigated. Results show that the accumulated rotation of the MSC under both wave and wind loadings is larger than that under the wave loading only. 相似文献
15.
在多风机风电场中,通过主动调节上游风机的偏航角度,抑制上游风机尾流对下游风机的影响,减少风力机机组之间的尾流相互干扰,以达到提高整个风电场效率的目的。采用基于开源平台Open FOAM自主开发的FOWT-UALM-SJTU求解器中风电场求解模块ALMWindFarmFoam,将致动线模型与CFD方法相结合,利用大涡模拟(LES)计算研究当上游风机处于不同偏航角度时,两风机之间的复杂尾流干扰效应。对比分析偏航角度改变时,上下游风机气动功率的输出特性,尾流速度变化以及风机的尾涡结构。数值模拟结果表明:在上下游风机沿流向方向距离保持不变的情况下,随着上游风机偏航角度的变化,上下游风机的尾流干扰现象以及下游风机的入流条件会发生明显改变,并会对下游风机的气动功率输出以及两风机风电场的整体流场产生显著影响。 相似文献
16.
The stability of platform structure is the paramount guarantee of the safe operation of the offshore floating wind turbine. The NREL 5MW floating wind turbine is established based on the OC3-Hywind Spar Buoy platform with the supplement of helical strakes for the purpose to analyze the impact of helical strakes on the dynamic response of the floating wind turbine Spar platform. The dynamic response of floating wind turbine Spar platform under wind, wave and current loading from the impact of number, height and pitch ratio of the helical strakes is analysed by the radiation and diffraction theory, the finite element method and orthogonal design method. The result reveals that the helical strakes can effectively inhibit the dynamic response of the platform but enlarge the wave exciting force; the best parameter combination is two pieces of helical strakes with the height of 15%D (D is the diameter of the platform) and the pitch ratio of 5; the height of the helical strake and its pitch ratio have significant influence on pitch response. 相似文献
17.
Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design 总被引：1，自引：1，他引：0
A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design. 相似文献
18.
随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。 相似文献