共查询到20条相似文献，搜索用时 24 毫秒
1.
Processing Multibeam Backscatter Data 总被引：1，自引：0，他引：1
A new highly precise source of data has recently become available using multibeam sonar systems in hydrography. Multibeam sonar systems can provide hydrographic quality depth data as well as high-resolution seafloor sonar images. We utilize the seafloor backscatter strength data of each beam from multibeam sonar and the automatic classification technology so that we can get the seafloor type identification maps. In this article, analyzing all kinds of error effects in backscatter strength, data are based on the relationship between backscatter strength and seafloor types. We emphasize particularly analyzing the influences of local bottom slope and near nadir reflection in backscatter strength data. We also give the correction algorithms and results of these two influent factors. After processing the raw backscatter strength data and correcting error effects, we can get processed backscatter strength data which reflect the features of seafloor types only. Applying the processed backscatter strength data and mosaicked seafloor sonar images, we engage in seafloor classification and geomorphy interpretation in future research. 相似文献
2.
3.
4.
Alexandre C. G. Schimel Jonathan Beaudoin Iain M. Parnum Tim Le Bas Val Schmidt Gordon Keith Daniel Ierodiaconou 《Marine Geophysical Researches》2018,39(1-2):121-137
Multibeam sonar systems now routinely record seafloor backscatter data, which are processed into backscatter mosaics and angular responses, both of which can assist in identifying seafloor types and morphology. Those data products are obtained from the multibeam sonar raw data files through a sequence of data processing stages that follows a basic plan, but the implementation of which varies greatly between sonar systems and software. In this article, we provide a comprehensive review of this backscatter data processing chain, with a focus on the variability in the possible implementation of each processing stage. Our objective for undertaking this task is twofold: (1) to provide an overview of backscatter data processing for the consideration of the general user and (2) to provide suggestions to multibeam sonar manufacturers, software providers and the operators of these systems and software for eventually reducing the lack of control, uncertainty and variability associated with current data processing implementations and the resulting backscatter data products. One such suggestion is the adoption of a nomenclature for increasingly refined levels of processing, akin to the nomenclature adopted for satellite remote-sensing data deliverables. 相似文献
5.
Pierre Cervenka Christian De Moustier Peter F. Lonsdale 《Marine Geophysical Researches》1994,16(5):365-383
Acoustic backscatter images of the seafloor obtained with sidescan sonar systems are displayed most often using a flat bottom assumption. Whenever this assumption is not valid, pixels are mapped incorrectly in the image frame, yielding distorted representations of the seafloor. Here, such distortions are corrected by using an appropriate representation of the relief, as measured by the sonar that collected the acoustic backscatter information. In addition, all spatial filtering operations required in the pixel relocation process take the sonar geometry into account. Examples of the process are provided by data collected in the Northeastern Pacific over Fieberling Guyot with the SeaMARC II bathymetric sidescan sonar system and the Sea Beam multibeam echo-sounder. The nearly complete (90%) Sea Beam bathymetry coverage of the Guyot serves as a reference to quantify the distortions found in the backscatter images and to evaluate the accuracy of the corrections performed with SeaMARC II bathymetry. As a byproduct, the processed SeaMARC II bathymetry and the Sea Beam bathymetry adapted to the SeaMARC II sonar geometry exhibit a 35m mean-square difference over the entire area surveyed.On leave at the Naval Research Laboratory, Code 7420, Washington D.C. 20375-5350. 相似文献
6.
Seafloor acoustic remote sensing with multibeam echo-sounders and bathymetric sidescan sonar systems 总被引：5，自引：0，他引：5
This paper examines the potential for remote classification of seafloor terrains using a combination of quantitative acoustic backscatter measurements and high resolution bathymetry derived from two classes of sonar systems currently used by the marine research community: multibeam echo-sounders and bathymetric sidescans sonar systems. The high-resolution bathymetry is important, not only to determine the topography of the area surveyed, but to provide accurate bottom slope corrections needed to convert the arrival angles of the seafloor echoes received by the sonars into true angles of incidence. An angular dependence of seafloor acoustic backscatter can then be derived for each region surveyed, making it possible to construct maps of acoustic backscattering strength in geographic coordinates over the areas of interest. Such maps, when combined with the high-resolution bathymetric maps normally compiled from the data output by the above sonar systems, could be very effective tools to quantify bottom types on a regional basis, and to develop automatic seafloor classification routines. 相似文献
7.
济州岛南部海域海底声呐图像分析与声学底质分类 总被引：2，自引：2，他引：0
东海北部外陆架靠近济州岛南部海域,是黄海槽向冲绳海槽延伸的部分,属于黑潮分支黄海暖流的通道入口,分布着脊槽相间的海底底形,对其海底声呐图像的处理分析及声学底质分类的分析研究,有助于了解该通道海底底形表层纹理特征及沉积物分布规律。基于在济州岛南部海域获取的多波束声呐数据,应用图像处理技术和方法,对数据进行了处理,获得了海底声呐影像图,并对其表层纹理特征进行了描述和分析;同时,基于多波束反向散射强度数据,结合19组海底地质取样数据,建立研究区海底反向散射强度与沉积物粒度特征之间的统计关系模型,并以改进的学习向量量化神经网络方法,实现对海底粉砂质砂、黏土质砂以及砂-粉砂-黏土3种底质类型的快速自动分类识别。 相似文献
8.
9.
Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data 总被引：2，自引：2，他引：2
The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can
be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range
of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking.
An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for
remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter
provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle
varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive
time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion
of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor.
In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships.
The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared
to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for
robust seafloor characterization. 相似文献
10.
While the average seafloor backscatter strength within a narrow range of grazing angles can be used as a first-order classification tool, this technique often fails to distinguish seafloors of known differing geological character. In order to resolve such ambiguities, it is necessary to examine the variation in backscatter strength as a function of grazing angle. For this purpose, a series of multiply overlapping GLORIA sidescan sonar images (6.5 kHz) have been obtained in water depths ranging from 1000 to 2500 m. To constrain the placement of acoustic backscatter measurements and to measure the true impinging angle of the incident wave, the corresponding seafloor was simultaneously surveyed using the Seabeam multibeam system. As a result of the multiple overlap, the angular response of seafloor backscatter strength may be derived for regions much smaller than the swath width. By using the derived angular response of seafloor backscatter strength in regions for which sediment samples exist, an empirical seafloor classification scheme is proposed based on the shape, variance, and magnitude of the angular response. Because of the observed variability in the shape of the angular response with differing seafloor types, routine normalization of single-pass swath data to an equivalent single grazing angle image cannot be achieved. As a result, for the case of single-pass surveys, confident seafloor classification may only be possible for regions approaching the scale of the swath width 相似文献
11.
12.
Processing of high-frequency multibeam echo sounder data for seafloor characterization 总被引：9，自引：0，他引：9
Processing simultaneous bathymetry and backscatter data, multibeam echosounders (MBESs) show promising abilities for remote seafloor characterization. High-frequency MBESs provide a good horizontal resolution, making it possible to distinguish fine details at the water-seafloor interface. However, in order to accurately measure the seafloor influence on the backscattered energy, the recorded sonar data must first be processed and cleared of various artifacts generated by the sonar system itself. Such a preprocessing correction procedure along with the assessment of its validity limits is presented and applied to a 95-kHz MBES (Simrad EM 1000) data set. Beam pattern effects, uneven array sensitivities, and inaccurate normalization of the ensonified area are removed to make possible further quantitative analysis of the corrected backscatter images. Unlike low-frequency data where the average backscattered energy proves to be the only relevant feature for discriminating the nature of the seafloor, high-frequency MBES backscatter images exhibit visible texture patterns. This additional information involves different statistical distributions of the backscattered amplitudes obtained from various seafloor types. Non-Rayleigh statistics such as K-distributions are shown to fit correctly the skewed distributions of experimental high-frequency data. Apart from the effect of the seafloor micro-roughness, a statistical model makes clear a correlation between the amplitude statistical distributions and the signal incidence angle made available by MBES bathymetric abilities. Moreover, the model enhances the effect of the first derivative of the seafloor backscattering strength upon statistical distributions near the nadir and at high incidence angles. The whole correction and analysis process is finally applied to a Simrad EM 1000 data set. 相似文献
13.
Shallow-water imaging multibeam sonars: A new tool for investigating seafloor processes in the coastal zone and on the continental shelf 总被引：8，自引：1，他引：8
John E. Hughes Clarke Larry A. Mayer David E. Wells 《Marine Geophysical Researches》1996,18(6):607-629
Hydrographic quality bathymetry and quantitative acoustic backscatter data are now being acquired in shallow water on a routine basis using high frequency multibeam sonars. The data provided by these systems produce hitherto unobtainable information about geomorphology and seafloor geologic processes in the coastal zone and on the continental shelf.Before one can use the multibeam data for hydrography or quantitative acoustic backscatter studies, however, it is essential to be able to correct for systematic errors in the data. For bathymetric data, artifacts common to deep-water systems (roll, refraction, positioning) need to be corrected. In addition, the potentially far greater effects of tides, heave, vessel lift/squat, antenna motion and internal time delays become of increasing importance in shallower water. Such artifacts now cause greater errors in hydrographic data quality than bottom detection. Many of these artifacts are a result of imperfect motion sensing, however, new methods such as differential GPS hold great potential for resolving such limitations. For backscatter data, while the system response is well characterised, significant post processing is required to remove residual effects of imaging geometry, gain adjustments and water column effects. With the removal of these system artifacts and the establishment of a calibrated test site in intertidal regions (where the seabed may be intimately examined by eye) one can build up a sediment classification scheme for routine regional seafloor identification.When properly processed, high frequency multibeam sonar data can provide a view of seafloor geology and geomorphology at resolutions of as little as a few decimetres. Specific applications include quantitative estimation of sediment transport rates in large-scale sediment waves, volume effects of iceberg scouring, extent and style of seafloor mass-wasting and delineation of structural trends in bedrock. In addition, the imagery potentially provides a means of quantitative classification of seafloor lithology, allowing sedimentologists the ability to examine spatial distributions of seabed sediment type without resorting to subjective estimation or prohibitively expensive bottom-sampling programs. Using Simrad EM100 and EM1000 sonars as an example, this paper illustrates the nature and scale of possible artifacts, the necessary post-processing steps and shows specific applications of these sonars. 相似文献
14.
15.
16.
The presently studied numerical model, e.g., composite roughness, is successful for the purpose of seafloor classification employing processed multibeam angular backscatter data from manganese-nodule-bearing locations of the Central Indian Ocean Basin. Hybrid artificial neural network (ANN) architecture, comprised of the self-organizing feature map and learning vector quantization (LVQ), has been implemented as an alternative technique for sea-floor roughness classification, giving comparative results with the aforesaid numerical model for processed multibeam angular backscatter data. However, the composite-roughness model approach is protracted due to the inherent need for processed data including system-gain corrections. In order to establish that tedious processing of raw backscatter values is unessential for efficient classification, hybrid ANN architecture has been attempted here due to its nonparametric approach. In this technical communication, successful employment of LVQ algorithm for unprocessed (raw) multibeam backscatter data indicates true real-time classification application. 相似文献
17.
18.
多波束声呐图像是进行海底底质分类的主要数据源之一,由于受海洋噪声、声波散射和混响、仪器设备等因素影响,其经各项常规改正后仍存在明显残差,突出表现在中央波束区和条带重叠区,难以形成高质量的声呐图像。文中分析了多波束声呐图像残差的成因及影响,提出了一种基于多条带最小二乘拟合的多波束声呐图像残差处理方法。首先,得到相邻声脉冲(ping)信号中央区域、重叠区域以及整体趋势的拟合函数;然后,通过拟合函数计算得到中央和重叠区域的残差改正系数;最后,通过改正系数进行残差改正。实验分析表明,该方法在保留原始细节的基础上,有效削弱了残差对声呐图像的影响,对多波束声呐图像处理具有参考和应用价值。 相似文献
19.
AbstractWe calibrate a technique to use repeated multibeam sidescan surveys in the deep ocean to recover seafloor displacements greater than a few meters. Displacement measurements from seafloor patches (3?km by 20?km) on the port and starboard side of the ship are used to estimate vertical and across-track displacement. We present displacement measurements from a survey of the Ayu Trough southwest of the Marianas Trench using a 12?kHz multibeam. Vertical and across-track displacement errors for the 12?kHz multibeam sonar are typically 0–2?m with RMS uncertainties of 0.25–0.67 m in the across-track and 0.37–0.75 m in the vertical as determined by 3-way closure tests. The uncertainty of the range-averaged sound velocity is a major error source. We estimate that variations in the sound velocity profile, as quantified using expendable bathythermographs (XBTs) during data collection, contribute up to 0.3?m RMS uncertainty in the across-track direction and 1.6?m RMS uncertainty in the vertical direction. 相似文献
20.
多波束声呐记录的海底后向散射片段(Snippet)数据处理成角度响应曲线和地理编码(Mosaic)图像可以
帮助识别海底底质类型和反映地貌形态,这一过程包括辐射校正、角度响应改正(AVG)和几何地理编码,但不同的多波束系统硬件在辐射校正和角度响应改正方法上存在差异且传统处理方法忽略了声呐系统本身的指向性模型随时间变化的事实。以声呐方程为基础,针对Kongsberg EM 多波束系统提出了一套完整的Snippet数据处理流程,并分析了各步骤中存在的可变性,给出了每一步的处理建议,最后将此方法应用于EM2040浅水多波束实测数据,并验证了该方法的有效性和实用性。 相似文献