首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
发射光谱法快速测定银锡铜铅锌钼铍   总被引:4,自引:9,他引:4  
叶晨亮 《岩矿测试》2004,23(3):238-240
使用两台摄谱仪同时接收光谱,以K2S2O7、NaF、Al2O3为缓冲剂,Ge、Sb为内标,测定化探样品中7项元素,检出限(μg/g)分别是:Ag0.02,Sn0.5,Cu 1,Pb 2,Zn 10,Mo 0.2,Be 0.5;精密度(RSD,n=20)在2.9%~16.8%。采用国家一级标准物质验证方法可靠性,测定结果与标准值一致。  相似文献   

2.
研究了碘化钾-甲基异丁基甲酮(KI—MIBK)萃取-火焰原子吸收分光光度法连续测定地球化学样品中痕量银、镉和铊的主要条件。通过对火焰原子吸收分光光度计气路控制系统及雾化器的改进,较大地改善了萃取-火焰原子吸收分光光度法测定银、镉和铊的稳定性和灵敏度。选择萃取酸度为1.2mol/L HCl、水相和有机相体积配比为3:1~4:1,方法精密度(RSD,n=12)为Ag4.5%~9.6%、Cd1.5%~7.9%、T14.5%~5.4%,检出限(3s)为Ag0.004μg/g、Cd0.007μg/g、T10.011μg/g,符合多目标地球化学调查样品测试及质量监控要求。用国家一级标准物质和密码组合标准物质进行验证,测试结果令人满意。  相似文献   

3.
电弧蒸馏光谱法测定化探样品中痕量银锡铅硼镓   总被引:13,自引:5,他引:13  
报道了采用电弧蒸馏光谱法对化探样品中痕量Ag、Sn、Pb、B和Ga等元素的测定方法的改进。试验了多种缓冲剂的效果和分馏效应,选择了最佳工作电流、电极规格和内标元素。方法可以充分分馏待测元素,分离基体元素,消除由于基体元素进入弧焰所带来的背景干扰,并使待测元素的谱线强度大为增强,对Ag、Sn、Pb、B和Ga方法的检出限分别为0.01~1.0μg/g,精密度试验RsD(n=12)在5.4%~11.8%。方法经土壤国家一级标准物质分析验证,结果与标准值相符。  相似文献   

4.
通过对预曝光时间、激发电流、光栏和狭缝以及工作曲线的校准、背景扣除方式等因素对分析结果影响程度的研究,建立了以K2S2O7、NaF、Al2O3和碳粉为光谱缓冲剂,Ge作内标,以实验确定的最佳样品缓冲剂比例及电弧光源条件,以单电极载体蒸馏、激发,测定地球化学样品中Ag、B、Sn、Mo的方法。方法检出限(3S):银0.006μg/g,硼0.34μg/g,锡0.15μg/g,钼0.04μg/g。  相似文献   

5.
本文建立了交流电弧直读原子发射光谱法测定地球化学样品中银、硼、锡、钼、铅的分析方法。以K2S2O7、NaF、Al2O3、碳粉为缓冲剂,Ge为内标,优选了分析线对,曝光时间为25s,同时扣除分析线和内标线背景。选取国家一级地球化学标准物质(GBW07103、GBW07104、GBW07107、GBW07312、GBW07302a、GBW07304a、GBW07305a、GBW07307a、GBW07406、GBW07446、GBW07454、GBW07456)作为标准系列,以对数坐标二次曲线拟合标准曲线,并采取两次平行分析取平均值的计算方法。方法检出限为:Ag:0011×10-6、B:054×10-6、Sn:019×10-6、Mo:0034×10-6、Pb:066×10-6,精密度为:Ag:401%~833%、B:377%~786%、Sn:294%~817%、Mo:303%~1094%、Pb:201%~1111%。经岩石、水系沉积物、土壤国家一级标准物质验证,测定值与认定值符合。本方法操作简便、工作效率高,是一种新的测定地球化学样品中银、硼、锡、钼、铅的分析方法,可推广应用于大批量地球化学样品的分析测试。  相似文献   

6.
深孔电极载体蒸馏光谱法测定化探样品中八个易挥发元素   总被引:2,自引:2,他引:2  
熊艳 《岩矿测试》2007,26(5):425-427
以碘化铵、硫酸钠、硫粉、碳粉、氧化钙、二氧化硅混合物为缓冲剂,深孔电极,截取曝光,以谱带背景作内标,一次摄谱同时测定化探样品中As、Sb、Bi、Ag、Pb、Cd、Tl、Sn等微量元素。方法精密度(RSD,n=10)为1.2%-5.0%,检出限为0.013—1.0μg/g。方法经国家一级标准物质验证,测定结果与标准值基本相符。  相似文献   

7.
河南商城鲢鱼尖变形花岗岩岩体的地质、地球化学特征、成因及含矿性研究表明,岩体具有贫SiO2、K2O,富Al2O3、TiO2、CaO、MgO、Fe2O3+FeO之特征,Na2O+K2O为7.65%~8.84%。K2O/Na2O为0.66~0.9;分异指数(Dr)为71.2~80.7,ASI值为0.81~0.98,氧化指数(OX)为0.55~0.32,8值为3.1~4.05,为准铝质钙碱性岩石系列。在An—Ab—Or图解及R1-R2多阳离子图解上多落于花岗闪长岩一二长花岗岩区,为斑状二长花岗岩-斑状花岗闪长岩。岩体与围岩接触带上可形成Cu、Pb、Zn、Ag、Mo多金属矿(床)。  相似文献   

8.
辽西北票早侏罗世兴隆沟组英安岩的地球化学特征   总被引:6,自引:4,他引:6  
李伍平   《岩石学报》2006,22(6):1608-1616
辽西北票早侏罗世兴隆沟组英安岩具有埃达克岩的地球化学特征。它们具有较高的SiO2(≥63.93%)、Al2O3(≥15.40%)、Na2O(≥3.65%)和MgO(≥2.32%,Mg^#=0.48~0.61)含量,较高的Sr(〉463μg/g)、Cr(〉119μg/g)、Ni(〉75μg/g)含量,较低的Yb(〈1.70μg/g)、Y(〈17μg/g)含量,高的La/Yb(〉18)、Sr/Y(〉34)值和低Rb/Sr(≤0.31)比值,稀土元素强烈分馏,弱的负铕异常(Eu/Eu^+=0.80~0.87).它们的Nd同位素(^143Nd/^144Nd=0.512414~0.512502.εND(t)=-2.10~-0.38,TDM:0.89~1.02Ga),Sr同位素(^87Sr/^86Sr=0.7073~0.7075,8Sr(t)=11.16~13.78)和Pb同位素(^206Pb/^204Pb=18.28~18.40,^207Pb/^204Pb=15.42~15.53,^208Ph/^204Pb=38.08~38.27)组成与华北陆块古老的岩石圈地幔及其中的中晚侏罗世和早白垩世火山岩不同。这表明兴隆沟组英安岩可能是古亚洲洋壳残片部分熔融形成的,熔体在上升过程中与地幔楔发生过强烈的混染作用。据此,推测古亚洲洋曾向华北陆块发生过俯冲作用。  相似文献   

9.
原子吸收法连续测定铋及氧化铋中铜铅铁镉镍   总被引:7,自引:2,他引:7       下载免费PDF全文
张耀春 《岩矿测试》2003,22(1):70-72
HNO3分解样品后,直接用火焰原子吸收法测定铋及氧化铋中铜、铅、铁、锡、镍。方法的检出限分别为Cu 0.22μg/g,Pb1.5μg/g,Fe0.39μg/g,Cd0.11μg/g,Ni0.34μg/g。与国标方法进行比较,分析结果基本一致,精密度试验,各元素的RSD(n=6)≤5.2%。  相似文献   

10.
矿床原生晕的垂直分带研究是寻找隐伏矿体和盲矿体的有效方法之一。本文通过对 30余种元素的分析 ,研究元素的分带指数、变化系数和变化指数梯度差 ,由此得出矿床原生晕由上至下的垂直分带为 :Mn Cd Zn Sn Cu Au Hg As( 1 82 0中段 ) ;Bi W Co Sb( 1 730中段 ) ;Mo Y( 1 70 0中段 ) ;Ni V Nb Sr La Sc Ti Yb Be Ag( 1 6 4 0中段 ) ;Pb Ga B Ba( 1 5 2 0中段 )。 30种元素的分带序列为 :Mn Ag1 Pb1 Cd Zn Sn Cu Au Hg As Bi W Co Sb Mo Y Ni V Nb Sr Cr La Sc Ti Yb Be Ag2 Pb2 Ga B Ba。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

15.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号