共查询到20条相似文献，搜索用时 781 毫秒
1.
湘西金矿含矿石英脉厚度变化的分形和混沌分析 总被引：3，自引：3，他引：3
本文对湘西金矿主要矿脉的厚度变化进行了分形分析。各矿脉的厚度变化均具有分形结构特征,其中V1脉的分维值最小,V4脉的分维值最大;并且同一条矿脉在不同中段的分维值也有较大变化。通过对矿脉厚度变化的相空间重构,表明各矿脉厚度空间变化序列均为混沌演化序列,在相空间维数达到6～7时出现混沌吸引子,混沌吸引子的分维值为1.2～6.0。矿脉厚度变化的分维值越小,矿脉的平均厚度越大,其构造和流体活动也越强烈。构造变形、流体活动、矿物沉淀与岩石渗透率之间的非线性耦合作用以及矿脉通过连通而生长是导致矿脉厚度分形分布与混沌演化的主要动力学机理。 相似文献
2.
川东南桑木场背斜寒武系脉体分形特征及其意义 总被引：1，自引：1，他引：0
通过对川东南桑木场背斜寒武系多期脉体野外详细构造特征、几何学特征的勘测,利用分形学研究方法对1200余条(古流体活动)脉体进行综合定量研究表明,寒武系节理脉体主要为限制脉体(层内脉体、层间脉体、断层相关层间脉体)、贯通脉体(隆张成因)两大类,它们具有不同的分形(分维值、变差系数等)特征,反映差异性古流体活动能力。层内脉体厚度分维值D=1.332～2.307,脉体间距呈负指数分布,变差系数Cv=0.7～1.0;层间脉体厚度分维值D=0.995～1.690,脉体间距呈对数正态分布为主,变差系数Cv=0.65～1.00;断层相关层间脉体厚度分维值D=1.048～1.254,脉体间距呈负指数和对数正态分布,变差系数Cv=0.5～0.9;隆张成因贯通脉体厚度分维值D=0.917(1),脉体间距呈幂率分布,变差系数Cv=1.5,流体(跨层)活动能力强。多期脉体具有渗流模型机制扩展生长特性,晚期隆升作用对桑木场背斜地区寒武系古流体活动以及区域保存条件具有至关重要的影响。 相似文献
3.
构造-流体-成矿作用的分形与混沌动力学 总被引：4，自引：2，他引：2
系统分析总结了构造活动与裂隙-脉体系统的分形生长,构造活动、流体作用及矿物沉淀之间的非线性反馈作用以及具分形结构与混沌特征的矿物沉淀和矿床的形成过程。以湘西金矿、水口山铅锌金多金属矿田等典型矿床为例,研究发现,水口山铅锌金多金属矿田地层及岩体内的元素含量分布均呈单分形关系,而断裂带内动性较强的Cu、Pb、Zn等成矿元素的元素具有双分形关系,产生了新的元素分布规律,指示断裂活动促进了成矿元素富集,湘西金矿石英脉是通过分形生长向着脉体长度-厚度分维值a值先减小(对应着脉体的膨胀)然后增大(对应着脉体的伸长)的趋势发展演化的,且该矿床各中段金品位空间变化序列均为非线性演化序列,其成矿流体的演化及成矿元素的沉淀富集成矿过程为混沌动力学过程。这些结果表明,构造-流体-成矿作用具有分形结构特征,并具体表现为断裂体系的分形分布,矿床的分形分布,裂隙-脉体系的分形分布和品位分布的分形变化等。成矿元素活化、迁移及沉淀的复杂动力学过程中,构造活动控制了裂隙-脉体系统的分形生长与矿床的就位,且存在于构造活动、流体作用及矿物沉淀之间的非线性反馈作用最终导致了具分形结构与混沌特征的矿物沉淀和矿床的形成。 相似文献
4.
成矿系统嵌套分形结构和自有序效应 总被引：10，自引：0，他引：10
成矿系统具有嵌套分形结构 ,岩石孔隙结构的传输性质制约着聚矿功能的实现。矿床(脉 )群聚分形分布特征明显 ,数量随时代先后呈幂律增长 ,成矿裂隙系统分维值大 ,高含量矿脉分维值低 ,这为隐伏矿床 (体 )预测提供了依据。裂隙生长是一种自组织临界现象 ,矿脉起源于微裂隙发展而成的张性裂隙 ,并最终形成脉系。超大型矿床的裂隙系统表现为临界分维状态 (5～ 12 5km ,D≈ 1 5;0 5～ 2 0km ,D≈ 1 3;1～ 10 0cm ,D≈ 1 5;0 0 0 36～ 0 18cm ,D =1 2 8～1 39)。成矿元素运移通过扩散和渗流实现 ,扩散速率的差异性导致运移路径的有序性 ,流体流动导致金及金属硫化物在界面处发生反应而沉淀成矿 ,矿床密度分布随矿化中心距离增大而减小的自有序效应保证了成矿系统的组织层次性。输运反应耦合成矿动力学计算机模拟验证了分形脉体演化模式和自有序效应。 相似文献
5.
6.
胶东金矿床的储量分形分布及其地质意义 总被引：2，自引：2，他引：0
本文对胶东地区的石英脉型和蚀变岩型金矿床的储量分布进行了研究.结果表明,金矿床的储量服从多重分形分布,且具有普遍意义.金矿床的储量分形结构是成矿系统处于混沌边缘的一种表现形式.分维D值的地质意义与研究范围有关,就胶东金矿带而言,它可用于划分蚀变岩型和石英脉型矿床. 相似文献
7.
8.
华南地区位于东亚壳体东南缘,包括东南地洼区和江南地洼区两个典型的华夏型地洼区,该区多阶段的复杂构造–岩浆演化形成了大量的花岗岩及断裂构造,并导致大量多因复成热液铀矿床的形成。这些花岗岩体、断裂构造及铀矿床的空间分布均具有分形特征。东南地洼区断裂构造的分维值为1.6800,明显大于江南地洼区的1.5939,显示前者更有利于热液铀成矿作用的发生。花岗岩体空间分布盒维数D总体上随其规模增大而增大,较大的周长–面积分形维数DPA会导致盒维数D增大,显示其构造–岩浆活动的复杂性增强。其中燕山晚期、燕山早期和印支期较大的D和DPA显示其更有利于热液铀成矿的发生。华南地区热液铀矿床空间分布盒维数为1.0254,明显小于两个不同构造区断裂构造空间分布的分维值,表明华南地区铀矿床的发育程度低于断裂。用元胞自动机模型对断裂和成矿演化进行模拟的结果表明,其分维值随时间逐渐增大,到中晚期断裂分维值增高至超过临界值后才有大规模成矿作用发生,成矿分维值显著增大。多阶段复杂的构造–岩浆活动的分形演化导致了华南地区多因复成热液铀成矿的分形分布。 相似文献
9.
江西德兴铜厂斑岩体铜品位的分形结构 总被引：17，自引：2，他引：15
铜厂斑岩体铜品位空间分布的分形研究表明,７个钻孔的铜品分布具有统计自相似性。铜吕位分维值由斑岩体南东侧向北西侧逐次增大,并在上盘表现为双重分维结构,表明铜厂玉岩体铜主要来自岩浆。 相似文献
10.
海南岛中西部金矿集中区断裂构造的分形研究 总被引：9，自引：1，他引：8
利用数盒子法对海南岛中西部金矿集中区断层分布统计表明 :断层系统在 5～ 75km尺度内符合分形分布 ,其分维值为 1 .70。根据成矿系统的差异 ,将全区分为 9个子区块 ,各子区块断层系统在 2 .5～ 2 5km尺度内均符合分形分布 ,其分维值介于 0 .6 6～ 1 .72之间。断层分维值的大小可作为判断矿化强弱的指标 :断层的分维值≥ 1 .5 ,是矿化集中区的标志 ;分维值小于 1 .4 ,不利于规模成矿 ;断层的分维值较大 ,是形成金矿化的有利条件 ,若形成超大型矿床 ,则断层系统需处于临界分维状态(Dc≈ 1 .5 )。白沙元门地区断层分维 (D =1 .4 9)接近于临界分维 ,预示该区有良好的找矿前景。基于离散元方法 (UDEC)的数值模拟显示 :随着断层分维值增大 ,则变形趋强、连通性更好、渗透率增大 ;临界状态下断层间的连通性好 ,变形及渗透率突然增加且变形及流体流动局限于骨干断层中 ,即临界状态下最有利于形成含矿流体的局域化分布 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
14.
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
20.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献