共查询到20条相似文献，搜索用时 250 毫秒
1.
烧锅营子金矿床的黄铁矿形成于早、中、晚3期,是主要的矿石矿物和载金矿物,其中以中期黄铁矿为最主要的载金者.黄铁矿的化学成分为:TFe43.34%~45.52%,S46.58%~48.86%,与标准黄铁矿相比显示亏铁、亏硫特点.黄铁矿内含丰富的微量元素,有Au、Ag、As、Sb、Bi、Cu、Zn、Pb、Co、Ni、W、Mo、Se等.其中Au、Ag、Cu、Pb、Zn、Bi含量较高,而As、Sb低,Se极低.其Au/Ag(多大于0.5)、(Cu+Pb+Zn)/(Co+Ni+As)(4.26)、Co/Ni(>> 1)比值表明其属中温岩浆热液矿床. 相似文献
2.
为探讨黑龙江省东宁县金厂特大型金矿床角砾筒型和蚀变岩(石英脉)型两种矿化类型的关系,系统采集样品,利用LA-ICPMS方法对4个成矿阶段黄铁矿微量元素进行了原位点分析和面扫描。结果表明,金厂金矿黄铁矿富含As、Co、Ni、Cu、Pb、Zn、Au、Ag、Sb、Se、Te、Bi,含少量W、Mo、Sn。两种类型金矿化,从第一成矿阶段到第四成矿阶段,黄铁矿微量金属元素成分及其变化具有相对一致的脉动演化规律,总体表现为从高Co、Ni低As向高As低Co、Ni演化,Au、Ag、Cu、Pb、Zn集中在第二、第三成矿阶段。研究认为,金厂金矿区不同矿化类型、不同金矿体属同一斑岩系统、不同空间位置产物;黄铁矿中As、Au+Ag、Cu、Pb+Zn含量,微量元素总量以及成分环带发育情况是评价金(多金属)矿化强度、伴生成矿元素以及富矿部位的有效指标。LA-ICPMS方法对黄铁矿微量元素的面扫描能高效经济地识别不同阶段黄铁矿,并简单量化其微量元素变化特征。 相似文献
3.
胶东是我国最重要的金矿集中区, 焦家金矿带是区内最主要的金矿床分布区, 黄铁矿是焦家金矿成矿作用的贯通性矿物, 是主要的载金矿物之一。本次工作采集了焦家断裂带深部2700~3000 m内的矿体及矿化体样品, 对黄铁矿进行了晶体形态、主量元素、微量元素、EMPA面扫等研究工作。各个成矿阶段的黄铁矿晶体形态标型研究表明, 成矿I阶段黄铁矿自形-半自形, 颗粒较细小, 以细粒的立方体、五角十二面体为主; 成矿Ⅱ、Ⅲ阶段黄铁矿自形-半自形, 颗粒较粗大, 以立方体为主, 含少量五角十二面体, 具有较多的立方体、五角十二面体聚形晶; 成矿Ⅳ阶段黄铁矿主要以继承性的细粒立方体黄铁矿为主。各个成矿阶段的主、微量元素有显著的差异, 焦家深部成矿流体成矿早期Ⅰ阶段富Co、Ni, 贫Au, 成矿温度较高, 随着成矿作用的进行, 温度逐渐降低, 成矿Ⅱ阶段的成矿流体中含有一定量的伴生中温金属元素Ag、As、Te、Cu等, 成矿Ⅲ阶段中, 成矿温度进一步降低, 成矿流体逐渐转化为贫Co、Ni, 富Au及其伴生金属元素Ag、As、Te、Cu、Zn、Pb、Sb等。根据电子探针(EMPA)面扫描, 区分两种黄铁矿类型, Py1型黄铁矿, 富Co、Ni, 贫As、Pb等元素; Py2型黄铁矿, 主要为富As, 包裹部分被溶蚀的Py1型黄铁矿; 通过对焦家金矿带黄铁矿的晶体形态、主量元素、微量元素、EMPA面扫等标型特征进行详细研究, 对于深部找矿预测具有十分重要的意义。 相似文献
4.
在胶东莱州吴一村地区完成的3266.06 m深钻,是目前焦家金成矿带最深见矿钻孔,研究钻孔揭露的深部矿石中金矿物及黄铁矿微量元素特征,对探讨深部成矿作用演化具有重要意义。笔者采取深钻中2420~3206 m垂深的岩（矿）芯样品进行了详细的岩相学和矿相学研究,结合扫描电镜和电子探针微区分析,研究了矿石中金矿物的赋存状态和成分。对不同成矿阶段形成的黄铁矿进行了LA-ICPMS微量元素分析。研究结果表明,深部矿石中载金矿物主要为黄铁矿,其次为石英、黄铜矿、方铅矿,可见金主要以自然金和银金矿的形式存在,以晶隙金和裂隙金为主,其次为包体金。与浅部金矿床比较,深部金的成色较高。黄铁矿分为6种类型,第Ⅰ成矿阶段形成富Co型黄铁矿Py1,第Ⅱ成矿阶段形成富Ni型黄铁矿Py2a和Py2b,第Ⅲ成矿阶段形成富Au、As型黄铁矿Py3a和富Au、Ag、Pb、Bi型黄铁矿Py3b,第Ⅳ成矿阶段形成贫微量元素黄铁矿Py4。其中,Py1和Py2a发生强烈破碎,裂隙表面对热液中的Au络合物产生吸附作用,对金沉淀富集起重要作用。黄铁矿中Co、Ni、As等微量元素主要以类质同象形式赋存,而Au、Ag、Cu、Pb、Zn、Bi等主要以纳米级、微米级矿物包体形式赋存。Pb+Bi、Cu+Pb+Zn、Te+Bi与Au+Ag呈明显正相关,而Au与As相关性较差。黄铁矿中Co、Ni含量较低,而Au+Ag+As或Au+Ag+Pb+Bi+Cu含量较高指示成矿有利。另外,黄铁矿中Co、Ni含量较高,并且破碎强烈,成矿相关元素含量较高也指示成矿有利。 相似文献
5.
山东招远前孙家金矿床地质和元素地球化学研究 总被引：6，自引：1，他引：5
对矿区地表和井下四个中段共采集地层、岩体、蚀变岩、石英脉和矿体样品503件,测试了Au、Ag、As、Sb、Cu、Pb、Zn、Sn、Bi、Mo、Co、Ni、Mn、Cr、V、Ti、Ba、Rb和Sr等19种元素的含量,运用Suffer软件编制了19种元素的矿脉地球化学纵剖面图,根据格里戈良分带指数法计算了元素的地球化学分带,建立了原生晕地球化学立体分带模式。综合地质地球化学资料分析得出以下认识：由花岗岩→钾长石化花岗岩→绢英岩化花岗岩→绢英岩→石英脉或硅化带→金矿石,随着蚀变作用增强,成矿元素Au、Ag、As、Cu、Pb、Bi、Mo、Sb增加,然而成矿作用主要发生在绢英岩化后的硅化阶段。矿区成矿元素Au、Ag、As、Cu、Pb、Sn、Bi、Mo、Co．Ni含量呈多峰分布,分布范围大,离散度大,其中Au、Ag高含量峰值区峰型突出,成矿富集趋势强烈。矿区成矿阶段可分为：石英-金-黄铁矿阶段、石英-金-多金属硫化物阶段和石英-碳酸盐阶段。F1因子（Au、Ag、As、Co、Ni、Sn、Bi）为主成矿阶段的元素组合,F3因子（Mo、Sb）和F5因子（Cu、Zn）反映了成矿热液活动的多期叠加。F4因子Rb、Sr、Ba组合在本区最具典型意义,Rb与Sr、Ba为对抗性元素,Sr、Ba、Ca低值带,Rb、K高值带恰好与Au、矩高值带吻合,显示花岗岩长石类矿物的钾长石化和绢云母化与成矿关系密切。与矿体的侧伏方向一致,总体上矿脉纵剖面地球化学高值带均向SW侧伏。其中Au、Ag高值带宽且比较连续,上下均未封闭,结合金矿体虽已出露地表但规模不大和原生晕分带特征,推测为一浅剥蚀矿床,向SW深部仍有一定延深。矿区原生晕分带序列自上而下为（Hg2、Sr、Ba、Rb）→（矩、Au、Sn、Mo、Cu→（Zn、Pb）→（Sb、Mn）→（Ni、V、Co、As、Hg1、Bi）。As、Sb、Hg高值带偏于中下部,可能指示下部隐伏矿体的存在。 相似文献
6.
曲家金矿位于我国重要的蚀变岩型金矿矿集区之焦家金矿带的中段，矿床赋存标高为-726～-1 334 m。为研究黄铁矿的演化及其对金成矿过程的指示，运用LA-ICP-MS分析黄铁矿原位微量元素含量，结合岩相学观察和点群分析对黄铁矿进行了分类。发现黄铁矿中Co、Ni、As等微量元素主要以类质同像形式赋存，而Au、Ag、Cu、Zn、Pb、Bi等元素主要以纳米级、微米级矿物包裹体形式赋存。黄铁矿主要分为5种类型：富Co型Py1,富Ni型Py2,富Au、As型Py3,富Au、Ag、Pb、Bi型Py4及“干净”型Py5。黄铁矿微量元素特征指示成矿物质可能主要来源于前寒武纪变质基底岩石和中生代岩浆岩，少量来源于地幔，成矿热液可能属变质热液、岩浆热液和浅部大气降水的混合成因。不同类型黄铁矿反映成矿热液由富Co、Ni经富As、Au向富Pb、Bi、Au、Ag演化。Py1和Py2形成后受构造活动影响发生强烈破碎，裂隙表面对热液中金络合物增强的吸附作用促使金在裂隙中沉淀，对金的富集成矿可能起重要作用。Co、Ni含量较低，同时Au、Ag、As、Pb、Bi等元素含量较高的黄铁矿与成矿作用有密切关系。另外，黄铁矿中C... 相似文献
7.
该文以山东招远大尹格庄金矿床中微量元素为研究对象,通过对矿床围岩、矿石等微量元素的研究,表明大尹格庄金矿围岩中微量元素以富含 Bi,Au,Pb,W,Ag,Sn 为特点,矿体和矿化体中元素组合为 Au,Ag,As,Sb,Hg,B, Cu,Zn,Bi,Mo,Mn,Co,Ni,W。在5个成矿阶段中,第二阶段与第三阶段微量元素的富集程度较明显,表现为 Au, Ag,As,Co,Bi,Cu,Pb,Zn 等的富集,成矿元素可分为2个分带序列,主成矿元素为 Au Ag Cu Pb Zn Bi 组合、头晕元素 As Sb Hg 组合和尾晕元素 Co Ni 组合。 相似文献
8.
半宽金矿床有两类矿石:石英-黄铁矿型和石英-多金属硫化物型。微量元素研究表明元素组合为Bi、Pb、Au、Ag、Zn、Sb、W、Cu、As、Mo。矿石中铅含量是区分黄铁矿型矿石和多金属硫化物矿石的重要指际。金矿化与Co/Ni、Cu+Pb、Rb/Sr值密切相关。1号脉和9号脉矿石微量元素的对比研究表明9号脉Au与Mo、Ag、Hg,As、Pb具显著正相关;1号脉Au与其他元素相关性不明显。9号脉经历三次金矿化,1号脉仅有一次金矿化。从矿石微量元素地球化学研究结果分析,9号脉下部仍有延伸。 相似文献
9.
太行山区土岭、石湖金矿区地球化学及其找矿标志 总被引：5，自引：0，他引：5
本文讨论了土岭、石湖金矿区与成矿有关的地质体的地球化学特征及其找矿标志。认为该矿区成矿物质—Au具有多源性;As、Sb、Ag、Au、Cu、Pb、Zn、Co、Ni为找矿指示元素;Hg是远程指示元素,而Au则是直接指示元素。指示元素的轴向分带序列为:As—Ag—Sb—Cu—Zn—Au—Pb—Ni—Co,并以此建立了预测矿体埋藏深度关系式:H=38.790As/Co+442.842 LnH=0.0923Ln[(As.Ag.Sb)/(Au.Co.Ni)]+6.3116 相似文献
10.
湖南龙山金锑矿黄铁矿微量元素特征及其对成矿过程的指示 总被引：4，自引：0，他引：4
黄铁矿中的微量元素含量既可提供元素赋存状态的信息,又可示踪热液成矿过程。利用电子探针对龙山金锑矿赋矿地层新鲜板岩、蚀变围岩以及矿石中黄铁矿的多种微量元素进行了分析,研究结果表明:沉积黄铁矿中Au主要以纳米颗粒形式存在;热液黄铁矿中既有固溶体金,也有纳米金。沉积黄铁矿中Co、Ni、Sb、Mn、Te可能以固溶体形式存在,As、Pb、Zn、Cu、Ag以包裹体形式存在;热液黄铁矿中As、Sb、Mn、Te可能以固溶体的形式存在,Co、Ni、Pb、Zn、Cu、Ag以矿物包裹体形式存在。龙山金锑矿至少经历了两个成矿期:早期是由深部的富Ni岩浆流体引发的金、铅、铜、钨矿化,该期矿化强度不大;晚期是以大气降水循环引起的金、锑矿化,是龙山金锑矿的主要成矿期,并大致可分为显微金阶段、次显微金辉锑矿阶段、可见金辉锑矿阶段和辉锑矿阶段4个成矿阶段。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献