共查询到20条相似文献，搜索用时 93 毫秒
1.
中国南方灯影峡期(晚前寒武纪)是白云岩广泛发育的海洋碳酸盐沉积时期,在灯影组.中部发育从海水直接沉积、沉淀的原生白云岩,目前仍保留其原始组构特征。从40个原生白云石(岩)中测得:泥晶白云石的δ13C值为3.64‰,δ18O值为-1.17‰(n=6);藻白云岩的δ13C值为3.52‰,δ18O值为-1.86‰(n=15);海水纤状白云石胶结物δ13C值为2.90‰,δ18O值为-2.65‰(n=8);海水刃状白云石胶结物的δ13C值为2.96‰,δ18O值为-2.41‰(n=8);泥晶纹层和海水纤状白云石胶结物的δ13C值为2.79‰,δ18O值为-3.13‰。40个岩样的δ13C平均值为3.25‰±0.44‰,δ18O平均值为-2.12‰±0.98‰(均以PDB标准)。对于灯影峡期海相白云岩的原始δ13C和δ18O值,不采用所有样品的平均值,而是采用原生白云石沉积物与海水白云石胶结物δ13C值和δ18O值两个图示分布区重叠部分的最重同位素值,即：δ13C值为4.43‰(PDB标准),δ18O值为-0.62‰(PDB标准),将其作为灯影峡期海洋碳酸盐岩的原始同位素组成。对海水原生白云石胶结物包裹体盐度进行了测定,海水δ18O计算值为2.90‰(SMOW标准),用原始δ18O值计算的原生白云石形成时的海水温度为40.8 ℃。这说明中国南方灯影峡期的海洋为炎热的较高的海水温度环境。 相似文献
2.
灯影组白云岩是四川盆地超深层油气勘探的重点领域,但目前人们对该套白云岩成因争议仍较大,且缺乏系统研究.通过对四川盆地灯影组白云岩C-O-Sr同位素和稀土元素数据的系统分析来研究白云石化流体的化学性质和成因,进而约束白云岩的差异性成因机制.研究表明：(1)灯影组白云岩碳同位素值较均一,δ13C值基本分布在0‰～+5.0‰之间,而氧同位素值变化较大.近地表环境基质白云岩和早期白云石胶结物δ18O均大于-8.0‰,埋藏环境白云石胶结物δ18O均小于-8.0‰,而热液白云石化胶结物δ18O均小于-10.0‰.(2)基质白云岩和早期白云石胶结物具有与同期海水相似的87Sr/86Sr值(0.708～0.709),指示其继承于海水流体;而埋藏环境白云石胶结物87Sr/86Sr比值明显大于同期海水,指示其为地层流体和深部热液流体来源.(3)灯影组白云岩稀土元素均亏损轻稀土元素、富集重稀土元素.基质白云岩和早期白云石胶结物可见Ce负异常、未见Eu明显异... 相似文献
3.
中国南方灯影峡期(晓前寒武纪)是白云岩广泛发育的海洋碳酸盐沉积时期．在灯影组中部发育从海水直接沉积、沉淀的原生白云岩。目前仍保留其原始组构特征。从40个原生白云石(岩)中测得：泥晶白云石的δ^13C值为‰,δ^18O值为-1.17‰（n=6);藻白云岩的δ^13C值为3.52‰,δ^18O值为-1.86‰（n=5);海水纤状白云石胶结物δ^13C值为2.90‰,δ^18O值为-2.65‰（n=8);海水刃状白云石胶结构的δ^13C值为2.96‰,δ^180值为-2.41‰(n=8);泥晶纹层和海水纤状白云石胶结物的δ^13C值为2.79‰,δ^18O值为-3.13‰。40个岩样的δ^13C平均值为3.25‰±0.44‰,δ^18O平均值为-2.12‰±0.98‰（均以PDB标准)。对于灯影峡期海相白云岩的原始δ^13C和δ^18O值,不采用所有样品的平均值．而是采用原生白云石沉积物与海水白云石胶结物δ^13C值和δ^18O值两个图示分布区重叠部分的最重同位素值,即δ^13C值为4.43‰（PDB标准）,δ^18O值为-0.62‰（PDB标准）,将其作为灯影峡期海洋碳酸盐岩的原始同位素组成。对海水原生白云石胶结物包裹体盐度进行了测定,海水δ^18O计算值为2.90‰（SMOW标准）,用原始δ^18O值计算的厚生白云石形成时的海水温度为408℃。这说明中国南方灯影峡期的海洋为走热的较高的海水温度环境。 相似文献
4.
为了研究渤海湾盆地黄河口凹陷沙河街组白云岩成因机理,通过岩心观察、薄片鉴定、阴极发光、X衍射、扫描电镜、背散射、碳氧同位素等方法,分析白云石岩石学、形貌学和同位素地球化学特征.结果表明,白云岩呈黄棕色,发育大量溶蚀孔和高岭石、燧石等矿物,δ13C值为-0.50‰~4.58‰,δ18O值为-14.58‰~-2.19‰,总体具有δ13C低正值,δ18O负值的特点.泥晶白云石,由微米级球状白云石和白云石化蓝细菌组成,亚微米级孔隙发育,见薄片状细菌丝和草莓状黄铁矿;纤维状白云石环边胶结物充填在溶蚀孔洞或围绕颗粒表面生长;菱形白云石,漂浮状分散在孔隙中.准同生期,硫酸盐还原菌的催化作用形成球形白云石;随后,受大气淡水淋滤,在湖底成岩环境微生物影响下形成纤维状白云石环边胶结物;浅埋藏期,由于埋藏白云岩化形成菱形白云石.这为古老湖相白云岩微生物成因提供具体实例,且对该地区勘探提供参考. 相似文献
5.
《矿物岩石》2020,(2)
本次针对川南地区下奥陶统桐梓组白云岩的岩石学、地球化学特征进行了研究。分析测试结果表明,川南地区下奥陶统桐梓组发育泥微晶白云岩和粉细晶白云岩两种白云岩类型。白云岩多具有泥晶、粉晶结构,有序度值0.40～0.97,总体较低,说明白云石化时间较早,为准同生期。各类白云岩稀土配分曲线整体上平缓,此外Ce轻微负异常,Eu异常不明显异常,与研究区桐梓组泥晶灰岩相似,泥微晶白云岩的δ~(13)C为-3.80‰～-0.36‰,δ~(18)O为-7.60‰～-5.62‰;粉细晶白云岩的δ~(13)C为-1.15‰～-0.12‰,δ~(18)O为-8.62‰～-5.60‰,大部分白云岩的碳、氧同位素组成与同期海水成因白云岩相近,阴极发光主要为暗红光,平均盐度指数120.7及Na元素平均含量838.23×10~(-6)则指示成岩环境盐度较高,表明白云石化流体主要为同期轻微或中等浓缩的海水。综上述特征,川南地区下奥陶统桐梓组白云岩成因主要为准同生期蒸发海水渗透回流白云石化。同时泥微晶白云岩具有较高含量的Fe和SiO_2,平均含量分别为5 103.90×10~(-6),19.10%,且镜下可见石英等陆源矿物,指示出该类白云岩在沉积过程中受陆源碎屑物质混入的影响。粉细晶白云岩Fe,Mn含量偏高,平均含量分别为6 147.48×10~(-6),628.30×10~(-6),有序度值较高(0.66～0.97)而Sr含量较低,δ~(18)O值更偏负,阴极发光显微镜下可见次生加大边和环带结构,重结晶作用显著,具有准同生期渗透回流形成,后期埋藏白云石化作用叠加的成因特征。 相似文献
6.
鄂尔多斯盆地马六段在盆地大部分地区被剥蚀,仅在盆地周缘地区分布,因此,有关该盆地马六段白云岩成因研究较少。本文通过对马六段白云岩岩石学特征、阴极发光特征、微量元素特征以及碳氧同位素地球化学特征进行分析,对鄂尔多斯盆地南部马六段白云岩特征及形成机制进行了研究。研究结果表明,盆地南部马六段白云岩主要由细—中晶白云岩组成,白云石具"雾心亮边"结构,阴极发光呈暗红色光。微量元素总体上具有较低的Fe、Mn值,平均值分别为447×10~(-6)和62×10~(-6),较高的K、Na值,平均值分别为517×10-6和252×10~(-6),以及中等含量的Sr元素值,平均值为155×10~(-6)。δ~(13)C值平均为-0.617‰,δ~(18)O值平均为-7.6‰,以上特征均反映出海源流体特征。白云石的"雾心"和"亮边"结构中微量元素含量相差不大,认为是在相同成岩环境的不同成岩阶段形成,其中"雾心"形成于浅埋藏环境的渗透回流白云石化作用,而"亮边"是在深埋藏环境下对早期白云石的调整和加强。 相似文献
7.
鄂尔多斯盆地南部奥陶系马家沟组主要由原始沉积的碳酸盐岩和岩溶角砾岩组成.储集空间以次生孔隙为主.中奥陶世沉积作用之后不久,即发生了溶解作用、白云石沉淀、干化脱水作用、机械压实作用、岩溶作用和胶结作用.胶结作用很普遍,主要发生在中石炭世之后的埋藏条件下,是对储层重要的破坏作用.充填于硬石膏结核溶模孔和非组构选择性溶蚀孔、洞、缝的方解石和白云石是最常见的胶结物.这些方解石和白云石胶结物具泥晶、嵌晶状或粒状晶粒结构.泥晶白云石基质的δ18O值-10.98‰～-0.8‰,平均-5.54‰;δ13C值-4.76‰～5.77‰,平均1.51‰.充填于溶蚀孔、缝中的白云石的δ18O值-12.54‰ ～-2.67‰,平均-7.34‰; δ13C值-5.56‰～3.48‰,平均0.28‰.充填于溶蚀孔、缝方解石的δ18O值-15.42‰ ～-6.02‰,平均-9.51‰;δ13C值-12.44‰～1.33‰,平均-3.20‰.总的来说,白云石和方解石胶结物的δ18O和δ13C值低于泥晶白云石基质的,原因是形成晚,受淡水淋滤、埋藏作用和有机质影响较大.泥晶白云石基质的Na含量0～ 350 μg/g,平均59μg/g; Sr含量0～380 μg/g,平均10 μg/g;Fe含量0～ 14 570 μg/g,平均1 040 μg/g; Mn含量0～4 670 μg/g,平均183 μg/g.充填于次生孔隙中的胶结物的Na、Sr、Mn含量与泥晶白云石基质的差别不大,因这些元素含量均低.充填于次生孔隙的碳酸盐胶结物较泥晶白云石基质有明显高的Fe含量.胶结物包裹体的均一温度在90℃ ～ 140C范围内.胶结物沉淀于埋藏较深,温度较高的还原条件下.流体包裹体的气相成分以CH4最为普遍,液相成分以H2O占绝大多数.早期胶结物形成于天然气形成前,晚期胶结物形成于天然气形成之后.岩溶洼地是胶结作用最发育的地带. 相似文献
8.
鄂尔多斯盆地奥陶系马家沟组白云岩是重要的油气储集层。斑状白云岩岩石学和地球化学特征研究表明,斑状白云岩中的斑块是由白云石颜色和晶粒大小的差异显示,斑块一般为粗粉晶至细晶白云石,发育白云石晶间孔。基质白云石晶粒小于斑块,较致密。白云石的δ13C平均值为0.72‰,δ18O平均值为-6.08‰。Fe2+平均值为2 689×10-6,Mn2+平均值为90.9×10-6,白云石CaCO3摩尔百分含量平均为51.6%,有序度介于0.674~0.940。粉-细晶白云岩中白云石及白云石亮边的均一温度为100℃~148℃,推算其形成时深度为2 100~4 100 m。上述特征表明,斑状白云岩形成于中-深埋藏成岩过程,白云石化过程中受到大气淡水影响。研究区斑状白云岩孔隙结构组合为粗偏型,可形成裂缝-孔隙型储层。 相似文献
9.
川东北地区下三叠统飞仙关组为浅海碳酸盐岩夹泥页岩与蒸发岩序列,而在碳酸盐岩台地边缘通常发育一些白云石化的鲕粒滩。这些鲕粒滩白云岩储集层是川东北地区主要的产气层,一些学者认为该套白云岩为大气淡水与海水的混合水白云石化成因,另外一些学者将其视为回流—渗透白云石化成因。飞仙关组鲕粒滩白云岩稳定同位素氧值一般为-6.73‰～-3.65‰(PDB),平均值为-4.89‰(PDB)（罗家寨地区为-10.81‰(PDB)）,稳定同位素碳值一般为+0.57‰～+3.00‰(PDB)。对基质和孔洞中充填的鞍状白云石和亮晶白云石胶结物而言,稳定同位素87Sr/86Sr值为0.70735～0.70800。这些有关鲕粒滩白云岩的数据表明白云石化作用是在埋藏条件下进行的。在测定流体包裹体的均一化温度后,计算出白云石化流体稳定同位素氧成分(δ18O白云石-δ18O水=［3.2×106 T-2］-1.5,来自 Friedman 和 ONeil（1977）),其平均值约为+4‰(SMOW)。根据流体稳定同位素氧、碳成分与海水蒸发时流体盐度的正相关性,计算出流体δD平均值约为+25‰(SMOW)。流体包裹体盐度测定表明,白云石化流体是一种超盐度卤水,其盐度是海水的数倍,白云石化的温度为90～130℃。由于下三叠统鲕粒滩白云岩的稳定同位素氧和碳成分与上二叠统生物礁白云岩的稳定同位素氧和碳成分类似,因此,它们的白云石化流体很可能是同一来源。然而,这一结论还有待于进一步研究。 相似文献
10.
采用野外观察、室内薄片鉴定及多项地球化学分析技术方法,对塔里木盆地柯坪地区上寒武统表生溶蚀型藻格架白云岩的特征及成因进行了研究。宏观上,藻格架白云岩呈丘状、透镜状夹于潮坪相白云岩层间,由于差异性溶蚀,发育了大量表生溶蚀孔。微观上,藻格架由富藻的泥粉晶白云石组成,而架间孔由浅色的亮晶白云石充填。藻格架泥粉晶白云石呈他形—半自形,镶嵌结构,具有暗红色—橙红色的阴极发光,较高的Na、K含量,较低的Fe含量;δ13C为-0.572‰～0.124‰、平均值-0.116‰,δ18O为-5.391‰～-4.983‰、平均值-5.240‰,表明其形成于准同生阶段盐度较高的相对氧化环境中。架间充填的亮晶白云石胶结物,呈半自形—自形中细晶,具有昏暗的阴极发光或者不发光,较低的Na、K含量,较高的Fe含量,δ13C值为-0.662‰～-0.251‰、平均值为-0.460‰;δ18O值为-6.639‰～-5.939‰、平均值-6.267‰,表明其形成于相对还原的埋藏环境。稀土元素分析结果表明,二者均具有LREE轻微富集、HREE亏损、Eu负异常特征,与海相泥晶灰岩稀土元素配分模式相似,揭示了其白云化流体均来自于原始的海水。在溶蚀作用方面,亮晶白云石胶结物相对泥粉晶白云石藻格架更易于溶蚀。前者在大气水表生溶蚀过程中,主量元素Ca、Mg丢失显著,Mg/Ca值由0.955降至0.007,微量元素Na、K丢失相对明显,Na/Ca值由原来的3.8×10-4降为1.9×10-4,K/Ca值由1.1×10-3降至检测限以下,而不改变稀土元素的配分模式。这些特征表明,表生溶蚀过程在元素特征上是一个去白云化的盐度降低过程,而这一过程中基本无稀土元素的带入带出。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
18.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
19.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献