首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 343 毫秒
1.
鲁照玲  胡红云  姚洪 《岩矿测试》2012,31(2):241-246
分别采用HNO3-HF、HNO3-HF-HCl和HNO3-HF-H2O2三种消解体系,通过微波和PTFE密封罐电热板对土壤标准物质进行前处理,采用电感耦合等离子体质谱(ICP-MS)对样品中的重金属元素Cr、Ni、Cu、Zn、As、Cd和Pb进行定量分析。探讨了前处理试剂(主要为HNO3、HCl和HF)以及土壤基体效应对Cr、Ni、Cu、Zn、As、Cd和Pb定量分析的影响。研究结果表明,前处理试剂对Cr、Ni、Cu、Zn、As、Cd和Pb的定量分析具有不同程度的影响;对于土壤基体,在三种消解体系下均可观察到基体抑制效应;采用PTFE密封罐电热板消解方法前处理,待测元素及相同元素不同同位素的方法空白和检出限均较低,效果整体优于微波消解法。特别是HNO3-HF-HCl消解体系,通过选用52Cr、60Ni、65Cu、66Zn、75As和206Pb等同位素,重金属元素Cr、Ni、Cu、Zn、As、Cd和Pb的测定值均能保证在标准值的允许误差范围内,可以满足大批量土壤样品中重金属元素同时定量分析的需要,为高效准确地开展土壤的风险评估以及为土壤的修复治理提供科学依据。  相似文献   

2.
为实现铀矿地质样品中的目标元素、伴生元素和主微量元素的一次溶矿、多仪器联合测定,样品采用逆王水预消解、四酸常压消解溶矿、低温蒸干和逆王水提取;消解得到的试样原液经ICP-OES测定主量元素,原液稀释后经ICP-MS测定目标元素(U、Th)、伴生元素(Mo、V、Ga、Ge、Re)和微量元素,原液经酸化和加入铁盐溶液后经AFS测定伴生元素Se;通过优化各仪器的测定条件和采取恰当的干扰消除方法,各元素得到准确测定。经试验测定,各元素的线性相关系数大于0.999,主量元素检出限为0.001%~0.03%,其他元素检出限为0.005~0.6μg/g;经国家标准物质验证,各元素的相对误差为-11.3%~12.1%,相对标准偏差(n=12)为2.1%~7.0%。文章中的研究方法实现了一次溶矿、多仪器联合测定的目的,测试结果满足地质矿产实验室测试质量规范的要求。  相似文献   

3.
高温、高压封闭压力酸溶可有效分解岩石、土壤、沉积物等地质样品,采用电感耦合等离子体质谱法(ICP-MS)进行测定,大部分元素可得到满意的回收率;但Zr、Hf、REEs、Rb、Th、U等元素用硝酸复溶困难,测定结果不准确。本文对传统的封闭压力酸溶方法进行改进,用盐酸复溶提取代替硝酸复溶提取,ICP-MS法测定岩石、土壤、沉积物等国家一级标准物质中Li、Be、Cr、Mn、Co、Ni、Cu、Zn、Ga、Rb、Sr、Mo、Cd、In、Cs、Ba、Ti、Zr、Nb、Sn、Sb、W、Hf、Ta、Tl、Pb、Bi、Th、U以及稀土元素(REEs)等46个元素。将原方法中的称样量25 mg加大至100 mg,溶样时间由12 h延长至48 h,有效地解决了取样代表性及HNO3复溶提取时Rb、Sr、REEs等元素测定结果偏低的问题。分析结果表明,除元素As和V在电感耦合等离子体质谱测定中存在Cl的干扰不能准确测定之外,其他44个元素的测定值与标准值基本一致。改进后的方法测定下限为0.01~0.85μg/g,精密度(RSD,n=10)为0.73%~13.1%,准确度小于<10%。方法准确、可靠,适用于各种不同种类地质样品的分析。  相似文献   

4.
利用电感耦合等离子体质谱法(ICP-MS)测定植物样品中微量元素的关键技术是消除植物样品的有机基体效应,本文通过预处理方法中的酸消解体系、称样量和消解方式消除其影响。以国家标准物质灌木枝叶组合样(GBW07603)为材料进行研究,对比分析了硝酸-过氧化氢、硝酸-氢氟酸、硝酸-氢氟酸-过氧化氢3种酸溶体系的消解效果,以确定最佳酸溶体系,进而定量研究2种称样量(50 mg和100 mg)和3种消解方式(密封高压二次消解、密封高压一次消解、微波消解)的消解效果,并以In作为内标采用ICP-MS测定微量元素含量。结果表明:硝酸-氢氟酸-过氧化氢酸溶体系的消解效果最好;50 mg的测定值更接近于参考值;微波消解法的测定值明显偏低,而密封高压二次消解法是灌木枝叶样品预处理的有效方法。  相似文献   

5.
利用电感耦合等离子体质谱法(ICP-MS)测定植物样品中微量元素的关键技术是消除植物样品的有机基体效应,本文通过预处理方法中的酸消解体系、称样量和消解方式消除其影响。以国家标准物质灌木枝叶组合样(GBW07603)为材料进行研究,对比分析了硝酸-过氧化氢、硝酸-氢氟酸、硝酸-氢氟酸-过氧化氢3种酸溶体系的消解效果,以确定最佳酸溶体系,进而定量研究2种称样量(50 mg和100 mg)和3种消解方式(密封高压二次消解、密封高压一次消解、微波消解)的消解效果,并以In作为内标采用ICP-MS测定微量元素含量。结果表明:硝酸-氢氟酸-过氧化氢酸溶体系的消解效果最好;50 mg的测定值更接近于参考值;微波消解法的测定值明显偏低,而密封高压二次消解法是灌木枝叶样品预处理的有效方法。  相似文献   

6.
李如燕  常青  江冶 《江苏地质》2022,46(1):103-110
植物样品经逆王水体系微波消解稀释至一定体积后,直接用高分辨等离子体质谱法(HR-ICP-MS)同时测定溶液中的Cr、Mn、Co、Ni、Cu、Zn、As、Se、Mo、Cd、Hg、Pb共12种无机元素的含量。在HR-ICP-MS仪上优化选择各元素的同位素、分辨率和内标元素,有效消除测定过程中的质谱与非质谱干扰。其中,各元素的检出限在0.55~48.6 ng/g之间 (稀释因子=250) ,相对标准偏差RSD(n=12) 均<10%。该方法经国家一级生物标准物质验证,测定结果接近标准值,方法准确可靠,适用于快速准确测定植物样品中的12种元素。  相似文献   

7.
海洋沉积物常用的分析方法如敞开消解或高压密闭消解结合电感耦合等离子体质谱(ICP-MS)或电感耦合等离子体发射光谱(ICP-OES)测定,粉末压片或熔片结合X射线荧光光谱法(XRF)测定,分别存在消解不完全、速度慢、检出限高等缺点,导致样品前处理效率低、待测元素少。针对上述问题,本文采用偏硼酸锂为熔剂分解样品,5%硝酸浸取,用ICP-MS法进行测定,建立了一种快速分析海洋沉积物中48种元素的方法。使用海洋沉积物国家标准物质作为高点绘制标准工作曲线,确定了助熔剂偏硼酸锂用量、稀释倍数、各待测元素的分析同位素及内标元素、仪器测定模式及个别元素的干扰校正方程等,得到最佳分解条件及测定条件。结果表明:由于高温损失,P、As、Se、Cd、Hg等元素无法得到准确结果,可改用微波消解等方式前处理后再进行测定;Cu、Zn、Cr、Ni、Co等共计48种元素使用本法均能得到准确结果,各元素方法精密度(RSD)均小于9.7%。本方法应用于分析海洋沉积物国家标准物质GBW07333、GBW07314、GBW07335、GBW07336,测定值和认定值相符;分析海洋沉积物实际样品,各元素加标回收率介于83.6%~118.6%。本方法可测定元素多,极大提高了分析效率,适合大批量样品分析。  相似文献   

8.
建立了二氯甲烷溶剂辅助微波消解-电感耦合等离子体质谱法测定原油中V、Cr、Fe、Ni、Cu、Zn、Mo、Co、Pb等16种微量金属元素。研究表明,用CH2Cl2分散原油样品,以浓HNO3-H2O2为消解体系,采用CEM微波消解系统消解样品,各元素线性关系良好,相关系数≥0.9995;检出限可达ng/L;方法精密度较高,相对标准偏差(RSD,n=3)<5.0%;回收率为92%~110%。以w(Ni)/w(V)与w(Fe)/w(V)比值为变量参数对不同原油样品进行聚类分析,表明国内与国外不同地区原油样品中各金属元素含量差异较大。  相似文献   

9.
凹凸棒黏土是具有层链状结构的含水富镁铝硅酸盐矿物,矿床成因不同导致凹凸棒黏土中微量元素的组成存在差异,其中Be、Cr、Ni、As、Cd、Sb、Hg、Pb会对健康和环境产生不利影响,而V、Mn、Co、Cu、Zn、Mo、Sn、Ba作为凹凸棒黏土的重要微量元素影响其性能和应用范围,因此,对凹凸棒黏土中微量元素进行精准分析可为凹凸棒黏土的高效增值深加工提供理论依据。采用电感耦合等离子体质谱法(ICP-MS)测定岩矿中微量元素具有检出限低和灵敏度高的特点,但因存在复杂质谱干扰,即使采用碰撞反应池(CRC)技术也很难完全消除。本文应用电感耦合等离子体串联质谱法(ICP-MS/MS)来消除质谱干扰,建立了准确测定凹凸棒黏土中微量元素Be、V、Cr、Mn、Co、Ni、Cu、Zn、As、Mo、Cd、Sn、Sb、Ba、Hg、Pb含量的分析方法。实验中采用由硝酸、盐酸、氢氟酸组成的混合酸对凹凸棒黏土样品进行微波消解,不仅加快了样品的消解速度,而且保持了消解溶液中分析元素的稳定。针对分析过程中所面临的质谱干扰,在MS/MS模式下,通过向CRC内加入O 2和NH3/He为反应气,利用质量转移反应生成相应的氧化物离子和团簇离子消除干扰,选择质量数相近且质谱行为相似的内标元素校正基体效应,稳定了分析信号。应用本方法对国家标准参考物质玄武岩(GBW07105)中16种微量元素进行测定,分析元素的相对误差在-9.60%~8.21%之间,相对标准偏差(RSD)≤6.0%。在选定的分析条件下,各元素的检出限为0.13~51.6ng/L。本方法有效减少了质谱干扰,提高了某些特定同位素在复杂介质中的准确性和灵敏度,适合凹凸棒黏土中16种微量元素的快速测定。  相似文献   

10.
电解二氧化锰废渣中的重金属元素在雨水淋滤下,通过地表径流对下游水生态系统及农业生态系统造成不同程度的环境污染和安全隐患,因此,准确测定电解二氧化锰废渣浸出液中的重金属元素含量具有重要的现实意义。电解二氧化锰废渣浸出液中的重金属元素含量通常很低,采用原子吸收光谱法、电感耦合等离子体发射光谱法测定,检出限通常难以满足测定要求。采用电感耦合等离子体质谱法(ICP-MS)测定,消除复杂质谱干扰面临挑战。本文采用电感耦合等离子体串联质谱(ICP-MS/MS)测定电解二氧化锰废渣浸出液中的重金属元素含量。电解二氧化锰废渣中6种重金属元素Cr、Ni、As、Cd、Hg、Pb经硫酸和硝酸混合酸浸出后直接采用ICP-MS/MS进行测定,利用串联质谱的O_2反应模式消除分析过程中Cr、Ni、As、Cd受到的质谱干扰,通过考察不同分析模式下~(52)Cr、~(60)Ni、~(75)As、~(111)Cd的背景等效浓度(BEC),评价质谱干扰对分析结果的影响。结果表明:在MS/MS模式下选择O_2为反应气,采用质量转移法和原位质量法可以消除~(52)Cr、~(60)Ni、~(75)As、~(111)Cd的所有质谱干扰。Cr、Ni、As、Cd、Hg、Pb检出限分别为3.06、9.31、3.50、2.72、2.03、1.89ng/L,加标回收率在95.6%~106.2%之间,相对标准偏差(RSD)≤3.9%。所建立的方法已应用于电解二氧化锰废渣浸出液中重金属元素的测定。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

15.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

19.
20.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号