共查询到20条相似文献，搜索用时 375 毫秒
1.
着重介绍构成非金属矿床成矿地质图的构造环境、含矿建造、成矿系列的基本概念，并指出构造环境是主体，控制着含矿建造和成矿系列的形成和分布。非金属矿床成矿地质图能够全面反映矿床形成的地质要素，而具有高度的综合性并与矿床成因相联系的特点，从而提示找矿方向。 相似文献
2.
构造岩浆活化与秦岭金矿床 总被引：1，自引：1，他引：1
赫英 《大地构造与成矿学》1996,20(1):61-66
本文论述了秦岭区构造岩浆活化作用与金矿床形成及演化的关系。作者将秦岭区金矿床分为五类，即；①岩浆活化矿床；②岩浆－构造活化矿床；③构造－岩浆活化矿床；④构造活化矿床；⑤构造－变质活化矿床。 相似文献
3.
江西九江——瑞昌地区重力滑动构造及隐伏矿床寻找初探 总被引：2，自引：0，他引：2
江西九江—瑞昌地区重力滑动构造十分发育，而且重力滑动构造与区内著名的武山、城门山铜矿及洋鸡山金矿等矿床（点）的关系十分密切，是区内极为重要的控矿构造。本文以典型的地质资料说明了九瑞地区存在滑动构造，并论述了滑动构造形成的原因及与已知矿床的关系，指出了区内下一轮找矿工作的重点是寻找隐伏矿床及新类型矿床，明确了隐伏矿床勘察的重点层位及地段。 相似文献
4.
一、构造分析是查明矿床成因的重要手段。苏联学者总结了过去不大注意用综合手段对矿床进行研究,从而对不少矿床的成因没有统一认识的经验教训,认识到研究矿床成因必须采取综合手段,最重要的是研究矿床构造。因为构造对矿床的形成往往起着主要的控制作用,构造的形成和演化控制着矿 相似文献
5.
6.
七星河金矿床是老柞山大型金矿床外围的一小型矿床，矿床的形成与地层、构造及岩浆岩活动有关，根据矿床分布规律可确定找矿方向。 相似文献
7.
构造改造成矿机制：——四川羊石坑汞矿成矿作用探讨 总被引：3，自引：0，他引：3
羊石坑汞矿床是位于四川省秀山县境内的大型汞矿床，产于下寒武统清虚洞组碳酸盐岩中，受地层和构造双重控制，并以细脉浸染型为特征而区别于我国其他大型汞矿床。概括了该矿产出的区域地质背景、物质来源和构造控矿特征，通过对不同构造部位矿物、元素及同位素等的分布、分配特征和矿床地质地球化学研究，揭示了成矿物质来自沉积地层，矿源层的形成与同生断裂活动和深部物质加入有关，构造－热液活动对矿源层的改造导致了矿床形成， 相似文献
8.
李伍铜矿床控矿构造地质特征及演化模式探讨 总被引：11，自引：1，他引：11
四川李伍铜矿床是我国西南地区一个中型富铜矿床，其矿床历经了多期次的构造演化和叠加。江浪穹隆体的变形变质对早期的矿源层具改造、矿液初步富集作用；构造岩性层控制了李伍铜矿床的产出与分布，Ｓ３期沿Ｓ２面理发育起来的大型平卧褶皱控制了矿体的空间形态，成穹阶段形成的滑脱剪切带是矿液运移的通道，也是找矿的有利场所，该带中次级逆冲断面及ＥＷ向挤压时期形成的Ｓ３面理挠曲是容矿空间，变形与成穹作用双重机制对该矿床构造的形成至关重要。 相似文献
9.
滇中砂岩铜矿是中生代陆相碎屑岩铜矿床.滇中含铜砂岩即矿源层形成后,构造对矿床的形成起着双重的控制作用,一是构造控制了成矿物质的活化、迁移、富集,二是构造控制了矿床的位置.文中初步提出了滇中构造控制矿床的规律. 相似文献
10.
滇中北部的鹅头厂式铁矿是一种典型的层控矿床。在矿床形成的过程中,构造起着双重的控制作用,即:东川运动之后的经向构造体系萌芽期,南北向的裂谷式海槽控制了矿源层的形成;晋宁—澄江运动时的经向构造体系定型和发展期,由南北向的罗次-易门断裂带派生的多字型构造控制了矿源层的改造,以及成矿物质的转移、富集和矿床的形成。因此,这类矿床是构造体系成生、发展控制层控矿床形成和分布的典型实例。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
14.
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
20.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献