共查询到20条相似文献，搜索用时 421 毫秒
1.
金刚石及其寄主岩石是人类认识地球深部物质组成和性质、壳幔和核幔物质循环重要研究对象。本文总结了中国不同金刚石类型的分布,着重对比了博茨瓦纳和中国含金刚石金伯利岩的地质特征,取得如下认识:(1)博茨瓦纳含矿原生岩石仅为金伯利岩,而中国含矿岩石成分复杂,金伯利岩主要出露在华北克拉通,展布于郯庐、华北中央和华北北缘金伯利岩带,具有工业价值的蒙阴和瓦房店矿床分布于郯庐金伯利岩带中;钾镁煌斑岩主要出露在华南克拉通,重点分布在江南和华南北缘钾镁煌斑岩带中;(2)钙钛矿原位U-Pb年龄和Sr、Nd同位素显示,86～97 Ma奥拉帕金伯利岩群和456～470 Ma蒙阴和瓦房店金伯利岩均具有低87Sr/86Sr(0.703～0.705)和中等εNd(t)(-0.09～+5)特征,指示金伯利岩浆源自弱亏损地幔或初始地幔源区;(3)博茨瓦纳金伯利岩体绝大多数以岩筒产出,而中国以脉状为主岩筒次之;博茨瓦纳岩筒绝大部分为火山口相,中国均为根部相,岩筒地表面积普遍小于前者;(4)奥拉帕A/K1和朱瓦能金伯利岩体是世界上为数不多的主要产出榴辉岩捕虏体和E型金刚石的岩筒之一,而同位于奥拉帕岩群的莱特拉卡内、丹姆沙和卡罗韦岩体与我国郯庐带的金伯利岩体类似,均主要产出地幔橄榄岩捕虏体以及P型和E型金刚石;(5)寻找含矿金伯利岩重点注意以下几点:克拉通内部和周缘深大断裂带是重要的控岩构造;镁铝榴石、镁钛铁矿、铬透辉石、铬尖晶石和铬金红石等是寻找含金刚石金伯利岩重要的指示矿物;航磁等地球物理测量需与土壤取样找矿方法相结合才能取得更好效果;(6)郯庐金伯利岩带、江南钾镁煌斑岩带和塔里木地块是中国重要含矿岩石的找矿靶区,冲积型金刚石成矿潜力巨大。 相似文献
2.
山东金刚石原生矿找矿前景探讨 总被引：2，自引：0，他引：2
金刚石形成于地幔深处，含金刚石的岩石只是一种运载和保存“工具”，凡是来自上地幔的岩石均有可能携带早已形成的金刚石而形成金刚石原生矿床。世界上已知金刚石原生矿除金伯利岩，钾镁煌斑岩型外，尚在橄榄岩，橄榄玄武岩，千枚岩，科马提岩，榴辉岩等岩石中发现了金刚石，可能存在金刚石原生矿新的岩石。山东位于华北地台的南东部，鲁西，鲁东基底属A型克拉通，幔源岩浆活动强烈，具备良好的金刚石原生矿成矿地质条件，已获得的大量的成矿信息和找矿线索表明，除已发现的蒙阴金伯利岩型金刚石原生矿外，应该存在着尚未发现的金刚石原生矿，找矿前景广阔，应进一步加强金刚石原生矿勘查工作。 相似文献
3.
近10年来,人们发现金刚石不仅产在金伯利岩中,也可产在不同成分的玄武质岩石中,如苦橄岩,玻质纯橄岩,超镁铁质岩等。近来认识到的含金刚石火成岩的两种主要类型是:火山的和深成的。含金刚石火山岩可分为四组:碱性—亚碱性钾质岩(金伯利岩和钾镁煌斑岩类);碱性—亚碱性钠质岩(沸煌岩和橄榄粗安岩类);钙—碱性岩(苦橄岩、玄武岩类);超镁铁质岩(玻质纯橄岩)。含金刚石的深成岩以如下岩石类型为代表:阿尔卑斯型超镁铁质岩;层状深成岩中的超铁质岩;还可能有前寒武纪的超镁铁质小岩体。所有含金刚石火成岩(包括金伯利 相似文献
4.
黔东—湘西早古生代岩石圈热状态与高产热率HHPRM型地幔源区 总被引：1，自引：0，他引：1
岩石圈热结构和热状态的研究对于大陆裂解、变质作用及活化构造形成机制等大陆动力学问题的研究十分重要。通过地球化学、构造地质学和综合分析,以贵州省镇远地区金伯利岩-钾镁煌斑岩和黔东—湘西一带的晚元古代地层为例,研究了扬子地块东南缘早古生代岩石圈热结构与热状态。提出高放射性元素产热率的HHPRM型地幔源区,进一步讨论HHPRM型地幔源区形成与演化的大陆动力学机制。认为古富集地幔(HHPRM型地幔源区)是镇远一带的早古生代钾镁煌斑岩-金伯利岩的岩浆源区,镇远地区金伯利岩-钾镁煌斑岩岩浆源区深度(H)在208～244km,形成温度在1547～1403℃间,该温度和深度范围属软流层,具有形成金刚石矿床的地质条件。建议在贵州—湖南—广西三省交界区的金伯利岩和钾镁煌斑岩岩群中应进一步开展金刚石矿床研究与勘查工作。 相似文献
5.
6.
金伯利岩是一种偏碱性的超基性岩,来源于地幔深部,富含挥发份和钾质,属于火成岩类,金伯利岩中主要含有镁铝榴石、金刚石、橄榄石、铬铁矿、铬透辉石、镁钛铁矿,锆石、碳硅石等造岩矿物.同时金伯利岩也被认为是含金刚石最主要的岩石.本文通过文献调研方法,野外现场表明金伯利岩中含有深源包裹体;全球金伯利岩主要分布在俄罗斯、博茨瓦纳、加拿大、安哥拉、南非、刚果民主和纳米比亚;中国金伯利岩主要分布在华北地台,在山东、辽宁、吉林、山西、河南和新疆等地.这些金伯利岩常常与深大断裂甚至地幔深部地质作用关系密切,常出现标志性矿物橄榄石、石榴石、高铬磁铁矿,伴有烃类或氢气.但含金刚石金伯利岩主要沿郯庐断裂带分布,如辽宁瓦房店、山东蒙阴等地.从时代上看,以往认为的早古生代的金伯利岩,更可能都是在早期形成于华北地台之岩石圈底部,而在中生代白垩纪时期才在大规模岩石圈拆沉的地质背景下的以快速上升的,尤其是那些含金刚石的金伯利岩岩管更是快速上升的典型代表,其标型矿物是镁铝榴石、高铬磁铁矿、钙钛矿等.国内辽宁瓦房店含金刚石金伯利岩产于郯庐断裂带东侧,有着与同期金伯利岩相同的岩石矿物学特征,其中的以50号岩管为代表的金刚石矿床是我国重要的战略矿产.金伯利岩及其中的金刚石带来众多直接的深部地幔信息,中国瓦房店、蒙阴一带的金刚石来自上地幔,而一些含硼蓝色金刚石则来自下地幔,不同层圈的金刚石携带不同的标志矿物,以橄榄石为例:来自上地幔金刚石携带的橄榄石为橄榄石;过渡带金刚石携带的主要为瓦兹利石和林伍德石;下地幔的金刚石则为布里奇曼石,它们是深部探测的重要探针. 相似文献
7.
金伯利岩型金刚石原生矿床含矿性评价是了解金刚石成矿规律和指导区域性找矿的重要依据。华北克拉通是我国重要的金刚石成矿远景区，目前已发现了两个重要的含金刚石金伯利岩岩区（山东蒙阴和辽宁瓦房店）。近年来，对岩区内不同品位金刚石典型矿床的研究表明金伯利岩中的金刚石品位取决于以下两个重要的地质过程：金伯利岩岩浆对金刚石的捕获作用和金伯利岩岩浆对金刚石的熔蚀作用。在华北克拉通下方存在一个金刚石稳定区，温度为950~1200 ℃，压力为4. 4~6. 1 GPa。山东蒙阴和辽宁瓦房店金伯利岩岩浆在上升过程中穿过该区域并捕获其中的金刚石，成为含矿岩浆；而铁岭和鹤县等金伯利岩岩浆在上升过程中不穿过该区域，成为不含矿岩浆。在穿过金刚石稳定区时，富矿的金伯利岩捕获了更多的金刚石以及金刚石的伴生指示矿物（如镁铝榴石，镁铬铁矿）；而贫矿的金伯利岩则相对捕获了少量的金刚石和指示矿物。这些指示矿物往往参加了金刚石的形成过程，有些作为缓冲剂控制了反应（岩浆或熔体）的氧化还原状态，有些则作为反应物或者生成物参与到反应中。部分指示矿物（如镁铝榴石）还进一步地记录了金刚石形成后金伯利岩岩浆对金刚石的交代作用。金伯利岩岩浆温度（T），氧逸度（fO2）和挥发份(H2O和CO2)均会对金刚石的熔蚀作用产生影响，其中氧逸度作用最大，温度次之，而挥发份作用最弱。在华北克拉通，金伯利岩中指示矿物（镁铝榴石、镁铬铁矿）和金伯利岩岩浆特征（温度，氧逸度和挥发份）共同组成了金伯利岩型金刚石原生矿的评价指标。 相似文献
8.
有关金刚石形成条件的讨论 总被引：18，自引：3，他引：15
在总结了近十几年来有关金刚石成因资料的基础上,结合笔者的实际研究,将原生金刚石划分为三种成因类型：金伯利岩和钾镁煌斑岩型、超镁铁质岩侵入体型及超高压榴辉岩和高压变质岩型。金伯利岩和钾镁煌斑岩型的金刚石结晶时代老,时间跨度长,在地台克拉通化至寄主岩浆侵位的漫长地质历史阶段中都可以形成和生长,金刚石中的复杂环带是这些事件的记录。金刚石的形成和生长过程可以在纯固相的环境,依赖于Ｃ微粒的固体扩散完成,但最佳的情况是有熔体和／或流体的参与。克拉通演化过程中夭折的金伯利岩岩浆、钾镁煌斑岩岩浆及碳酸岩岩浆活动,以及深部流体脉动式的作用都是金刚石生长的有利时期。超镁铁质岩侵入体型金刚石的形成可能与岩体在固态侵位前地幔深部熔融橄榄玄武岩或苦橄质玄武岩岩浆的作用有关,同时也伴随深部流体的活动。中国西藏罗布莎岩体中与金刚石共生的矿物组合有些和金伯利岩型金刚石共生的矿物相似,可作为其依据。超高压榴辉岩型及其它与板块俯冲相关的金刚石的形成则与体系中存在强的应力有关。上述认识与金刚石结晶于高温、高压的基本条件并不相悖,但熔体和／或流体及强应力的存在都可以降低金刚石结晶时所需的温压条件。 相似文献
9.
华北地台东部有６个金伯利岩岩区，它们分布于古陆核的中心（如富矿的复县一蒙阴）、北缘（如贫矿的铁岭）及西缘元古代裂陷带（如无矿的涉县一鹤壁）。本文在不相容元素、同位素源区约束讨论的基础上，选择代表性的金伯利岩进行源区地球化学定量反演，进而讨论了源区的不均一性。金伯利岩产出的构造部位及由此所反映的岩石圈厚度、地慢流体活动强度的差异，不仅影响金伯利岩含金刚石性，而且也是地幔源区不均一性的影响因素 相似文献
10.
鲁西蒙阴地区是我国金刚石原生矿重要产地之一,其含金刚石金伯利岩命名为常马庄单元。本文对该区金伯利岩地质特征进行了梳理，按岩石命名原则对该地区含金刚石金伯利岩不同岩石类型进行了重新划分和命名，共划分了细斑微粒金伯利玢岩类、粗斑细微粒金伯利玢岩类和含碎屑细斑或中细斑微粒金伯利玢岩类3个岩石类型和13个亚类型，同时首次从早至晚划分了细斑微粒金伯利玢岩类→含围岩角砾中细斑微粒金伯利玢岩类→粗斑细微粒金伯利玢岩类的侵入序列。通过对前人研究资料的综合分析并结合野外实地考察认为:以前套用南非金伯利岩型金刚石原生矿中心式火山喷发型成矿模式作为蒙阴地区含金刚石金伯利岩的成矿模式不符合该区实际地质特征。提出了该区金刚石金伯利岩新的成矿模式为中心式—裂隙式复合潜火山隐爆岩浆序次侵入充填型岩浆侵入角砾岩筒及其伴生的岩脉、岩床模型。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献