共查询到20条相似文献，搜索用时 78 毫秒
1.
华北中部造山带南缘华山地区太华变质杂岩中锆石U-Pb定年 总被引：11，自引：0，他引：11
华山太华变质杂岩出露于华北克拉通中部造山带最南缘,区内斜长角闪片麻岩呈"透镜状"或"似层状"产出于黑云斜长片麻岩或TTG片麻岩中。大多数含有石榴子石变斑晶的变质岩中,保留了至少3期变形形迹和3个阶段的变质矿物组合。本文对斜长角闪片麻岩和黑云斜长片麻岩中的锆石,进行了SIMS和LA-ICP-MSU-Pb定年。斜长角闪片麻岩的岩浆锆石年龄为2.29Ga,表明其原岩形成于古元古代。斜长角闪片麻岩、黑云斜长片麻岩中的变质锆石及锆石变质增生边年龄为1.94～1.82Ga,表明华山地区比华北克拉通中部造山带中段及北段其他地区普遍记录的约1.85Ga的变质事件,不仅早了约0.1Ga,且变质事件持续达0.1Ga之久。这说明华北中部造山带前寒武纪期间的构造-变质事件是一个比较漫长的复杂过程。 相似文献
2.
豫西小秦岭地区太华杂岩中斜长角闪岩地球化学及其大地构造意义 总被引：5，自引：1，他引：5
小秦岭地区太华杂岩的斜长角闪岩以多种产状出露于表壳岩系和花岗质片麻岩中，经历了角闪岩相区域变质作用，形成黑云斜长角闪岩、透辉斜长角闪岩、斜长角闪岩和黑云石榴斜长角闪岩等岩石类型。 相似文献
3.
色尔腾山岩群是华北克拉通中西部早前寒武纪变质结晶基底的主要组成部分,对研究华北克拉通基底演化具有十分重要的意义。色尔腾山岩群的形成时代是目前研究的热点之一,本文通过岩石学和锆石SHRIMP U-Pb定年研究,查明了内蒙古乌拉特中旗乌兰乡查干哈达地区色尔腾山岩群东五分子岩组的岩石组成和年代学特征。东五分子岩组遭受了后期岩浆和构造作用的强烈破坏,未见顶底,主要由中细粒斜长角闪岩、细粒黑云斜长片麻岩、眼球状细粒黑云斜长片麻岩、条带状细粒黑云斜长片麻岩和细粒黑云角闪片岩组成,矿物组合特征指示岩石经历了低绿片岩相-低角闪岩相变质。其中,眼球状细粒黑云斜长片麻岩出露相对较厚,与细粒黑云斜长片麻岩多呈互层状产出,局部偶夹细粒黑云斜长片麻岩。本次研究选取其中新鲜的细粒黑云斜长片麻岩进行了锆石SHRIMP U-Pb测年分析,其锆石多呈自形-半自形,发育震荡环带,主体为岩浆成因,锆石SHRIMP U-Pb定年结果为（1 930.7±9.6）Ma,代表原岩（中酸性火山岩）冷凝结晶年龄,表明东五分子岩组经历变质作用的时代应晚于1 930 Ma。 相似文献
4.
脉岩分布在某地槽区一背斜构造轴部的太古代变质岩和燕山期花岗岩、花岗斑岩中。该区脉岩有中-基性脉岩(闪长岩、黑云母角闪岩、煌斑岩),酸性脉岩(花岗斑岩、花岗伟晶岩、霓石正长岩、石英斑岩)和石英碳酸盐脉,构成了一个脉岩群。 太古代变质岩系。下部出露在背斜构造的轴部,为黑云外长片麻岩、混合岩化黑云斜长片麻岩、角闪黑云斜长片麻岩,有时彼此互层出现,某些地段见大理岩夹层;上部分布在背斜构造的两翼,为黑云斜长片麻岩、角闪斜长片麻岩、花岗质混合片麻岩,局部夹大理岩 相似文献
5.
6.
杏树台矿区片麻状花岗岩的成因,一直是个有争议的问题。以往资料认为,它是由沉积泥砂质岩石经区域变质和混合岩化作用形成的均质混合岩。本文根据其产出特征,通过岩石学、矿物学及稀土元素分配的研究,认为其原岩是晚太古高Al_2O_3型英云闪长岩-奥长花岗岩系,是壳岩部分熔融的产物。 1.地质背景杏树台矿区位于太行山南段,大地构造为华北陆台山西台背斜赞皇隆起区。矿区出露地层为五台群石家栏组,黑云母K-Ar法年龄为23.74亿年(常子文,1961)。石家栏组分为三个岩段:下段为黑云斜长片麻岩、二云斜长片麻岩;中段为斜长角闪岩和石榴斜长角闪岩;上段为黑云角闪斜长片麻岩夹条带状铁硅质岩。变质程度相当于绿帘角闪岩相—铁铝榴石角闪岩相。黑云斜长片麻岩的原岩为泥质粉砂岩;斜长角闪岩和黑云角闪斜长片麻岩的原岩为与水下玄武质火山活动有关的基性火山岩,其中斜长角闪岩为岛弧拉斑玄武 相似文献
7.
藏东八宿地区泛非期花岗岩锆石SHRIMP U-Pb定年 总被引：9，自引：1，他引：8
卡穷细粒黑云母碱长花岗岩出露于藏东八宿县同卡地区,是藏东地区首次发现的泛非期花岗岩.卡穷微陆块呈岩片状夹持于班公湖-怒江缝合带内,卡穷岩群构成卡穷微陆块的主体,卡穷岩群是由花岗岩、花岗片麻岩、黑云斜长片麻岩、大理岩、黑云斜长变粒岩、退变榴辉岩等组成的构造地质体.卡穷细粒黑云母碱长花岗岩获得的锆石SHRIMPU-Pb年龄为507Ma±10Ma,为泛非事件的岩浆活动记录,进一步证实班公湖-怒江板块缝合带以南是泛非期基底,为解决青藏高原南部的构造演化问题提供了新资料. 相似文献
8.
苏鲁造山带胶南区段片麻岩原岩的成因:地球化学及Nd同位素证据 总被引：1，自引：1，他引：1
出露于苏鲁造山带胶南区段的片麻岩主要包括三种类型:黑云斜长片麻岩、二长花岗片麻岩和A型花岗质片麻岩,地球化学判别结果表明它们的原岩均为火成岩.不同类型片麻岩的地球化学特征各不相同,反映它们的原岩具有不同的形成与演化历史.其中黑云斜长片麻岩以负Eu异常弱,甚至出现明显的正异常(δEu=0.60～1.45)、强的Ba正异常、无明显的Sr异常为特征而明显不同于其它类型的片麻岩.其地球化学的总体特征类似于扬子克拉通北缘新元古代双峰式火山岩的酸性端元;与黑云斜长片麻岩类似,二长花岗片麻岩中轻、重稀土元素之间的分馏程度也较强(LaN/YbN=6.3～17.2),但以强的负Eu异常(δEu=0.27～0.54)、强的Sr负异常和弱的Ba负异常为特征明显不同于黑云斜长片麻岩;A型花岗片麻岩的稀土模式及蛛网图的形态类似于二长花岗片麻岩,所不同的是前者Nb、Ta负异常相对较弱.区内几种类型片麻岩的εNd(t)值差别不大,反映它们的原岩之间可能有一定的成因联系.它们的Nd同位素模式年龄TDM都集中在2.0Ga左右,表明它们的源区主要为早元古代的地壳物质,且岩性比较均一.推测二长花岗片麻岩与黑云斜长片麻岩的原岩是同源异相,而A型花岗岩是在大规模Ⅰ型花岗质岩浆形成后,由脱水的紫苏辉石质残留下地壳物质再次发生部分熔融形成的. 相似文献
9.
卡穷细粒黑云母碱长花岗岩出露于藏东八宿县同卡地区,是藏东地区首次发现的泛非期花岗岩。卡穷微陆块呈岩片状夹持于班公湖-怒江缝合带内．卡穷岩群构成卡穷微陆块的主体,卡穷岩群是由花岗岩、花岗片麻岩、黑云斜长片麻岩、大理岩、黑云斜长变粒岩、退变榴辉岩等组成的构造地质体。卡穷细粒黑云母碱长花岗岩获得的锆石SHRIMPU—Pb年龄为507Ma±10Ma,为泛非事件的岩浆活动记录．进一步证实班公湖-怒江板块缝合带以南是泛非期基底．为解决青藏高原南部的构造演化问题提供了新资料。 相似文献
10.
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献