共查询到20条相似文献，搜索用时 562 毫秒
1.
羌塘中部的榴辉岩分布于龙木错-双湖-澜沧江板块缝合带中,是青藏高原内部首次发现的榴辉岩[1].它与蓝片岩、蛇绿岩等构成东西向的构造混杂岩带.研究表明,南北羌塘古生代的地层序列、建造类型和生物组合明显不同,龙木错-双湖-澜沧江板块缝合带应为冈瓦纳大陆和欧亚大陆的分界[2～4],但也存在不同的观点[5,6]. 相似文献
2.
青藏高原羌塘高压变质带的特征及其构造意义 总被引：2，自引：0，他引：2
羌塘高压变质带分布于龙木错-双湖板块缝合带的南侧．西起红脊山．经片石山、蓝岭、角木查尕日、纳若．到双湖以东的才多茶卡,长约500km。向东已经延伸到巴青以北和昌都的吉塘地区,再向南进入滇西与澜沧江蓝片岩带共同构成一条断续延伸近2000km的高压变质带。羌塘高压变质带主要由蓝片岩和榴辉岩构成,蓝闪石片岩中蓝闪石和多硅白云母同位素定年结果为223-215Ma,榴辉岩的变质年龄为243-217Ma。估算蓝片岩的变质温度为410-460℃,变质压力为0．67-0．75GPa：榴辉岩相的变质作用温度不超过5000C,压力为1．56-2．35GPa。羌塘高压变质岩定年研究结果确定龙木错-双湖板块缝合带最终碰撞闭合发生在晚三叠世早期。羌塘高压变质带是冈瓦纳与欧亚大陆汇聚事件的重要记录。 相似文献
3.
羌塘中部榴辉岩是2004年报道的青藏高原内部首例榴辉岩.榴辉岩出露于龙木错-双湖缝合带的中部,岩体呈透镜状、块状产在石榴白云母片岩和蓝片岩的高压变质带中,直接围岩为石榴白云母片岩.榴辉岩块体大小不一,大者可达数百米,小者仅几个厘米.主要矿物成分为:石榴子石、绿辉石、多硅白云母、角闪石、金红石、榍石、绿帘石、磷灰石、斜长石和石英等. 相似文献
4.
羌塘中部高压变质带由榴辉岩、石榴子石白云母片岩、蓝片岩等组成,与蛇绿混杂岩、晚古生代浅变质地层岩片等共同构成了龙木错-双湖板块缝合带这一构造混杂岩带。目前已先后在片石山地区、果干加年山地区和冈玛错地区发现典型的榴辉岩,以片石山和果干加年山地区的榴辉岩为研究对象。片石山地区的榴辉岩为低温型榴辉岩,围岩为石榴子石白云母片岩,变质作用峰期温压条件为T=500℃,p=2.3GPa。已获得230~244Ma锆石SHRIMP U-Pb年龄和石榴子石Lu-Hf等时线年龄,代表榴辉岩相变质作用的时代。榴辉岩及其围岩在误差范围内具有相同的Ar-Ar年龄,为210～220Ma,代表了榴辉岩及其围岩冷却抬升至近地表的时代。果干加年山地区的榴辉岩具有和片山地区榴辉岩相似的野外产状、矿物组合、温压条件和围岩。Ar-Ar年代学研究显示,果干加年山地区的榴辉岩在240Ma左右即已折返并抬升至近地表,其变质作用峰期时代明显要早于片石山地区。 相似文献
5.
青藏高原羌塘中部榴辉岩Ar-Ar定年 总被引：25，自引：4，他引：25
羌塘榴辉岩产于红脊山-双湖高压变质带中段的片石山地区,是目前青藏高原内部唯一的榴辉岩产地。榴辉岩多硅白云母~(40)Ar-~(39)Ar年龄 t_p=219.3±1.5Ma;榴辉岩围岩的多硅白云母~(40)Ar-~(39)Ar 年龄 t_p=217.2±1.8Ma,定年结果表明,榴辉岩与围岩经历了相同的高压变质作用,与红脊山-双湖地区蓝闪片岩的高压变质时间是一致的。根据已有高压变质年代学资料,从羌塘的红脊山到双湖、那曲地区的巴青以北、昌都的酉西,直到滇西地区,断续分布长达2000余公里的高压变质带为同一期构造事件的产物,是龙木错-双湖板块缝合带向南延伸到滇西的重要依据。榴辉岩的定年数据进一步揭示,冈瓦纳板块与欧亚(扬子)板块的主体碰撞时间在220Ma 左右,同时也是古特提斯洋消亡的时间记录。 相似文献
6.
羌塘中部高压变质带由榴辉岩、石榴子石白云母片岩、蓝片岩等组成,与蛇绿混杂岩、晚古生代浅变质地层岩片等共同构成了龙木错-双湖板块缝合带这一构造混杂岩带。目前已先后在片石山地区、果干加年山地区和冈玛错地区发现典型的榴辉岩,以片石山和果干加年山地区的榴辉岩为研究对象。片石山地区的榴辉岩为低温型榴辉岩,围岩为石榴子石白云母片岩,变质作用峰期温压条件为T=500℃,p=2.3GPa。已获得230～244Ma锆石SHRIMP U-Pb年龄和石榴子石Lu-Hf等时线年龄,代表榴辉岩相变质作用的时代。榴辉岩及其围岩在误差范围内具有相同的Ar-Ar年龄,为210～220Ma,代表了榴辉岩及其围岩冷却抬升至近地表的时代。果干加年山地区的榴辉岩具有和片山地区榴辉岩相似的野外产状、矿物组合、温压条件和围岩。Ar-Ar年代学研究显示,果干加年山地区的榴辉岩在240Ma左右即已折返并抬升至近地表,其变质作用峰期时代明显要早于片石山地区。 相似文献
7.
青藏高原龙木错—双湖—澜沧江板块缝合带研究二十年 总被引：35，自引：0，他引：35
龙木错—双湖—澜沧江板块缝合带是笔者1987年首次提出,作为青藏高原石炭纪—二叠纪冈瓦纳与欧亚大陆界线,20年来一直是青藏高原大地构造研究领域争论的焦点之一。随着地质研究程度的不断深入,尤其是羌塘地区完成了1∶25万地质填图的全面覆盖,第三代青藏高原地质图已经面世,资料空前丰富,高原神秘的面纱进一步揭开。本文较详细地回顾了龙木错—双湖—澜沧江板块缝合带与冈瓦纳北界的研究历史与过程、认识分歧和研究现状。笔者以羌塘地区为基础总结了龙木错—双湖—澜沧江板块缝合带两侧的基底性质与构成、古生代沉积建造和生物地理区系、蛇绿岩、高压变质带、岩浆活动与变质作用、构造运动分期和地球物理性质等方面的研究进展。同时,笔者认为作为青藏高原地质演化历史上具有重要地位的缝合带,已经进行的工作只是深入研究的开始。 相似文献
8.
藏北羌塘中部高压变质带中石榴子石白云母片岩的岩石学和变质特征 总被引：8，自引：2，他引：6
羌塘中部的高压变质带位于龙木错-双湖-澜沧江板块缝合带之上,由榴辉岩、蓝片岩和石榴子石白云母片岩组成,其形成过程对探讨板块缝合带的构造演化具有重要意义。以其中的石榴子石白云母片岩为研究对象,通过岩相学研究并结合电子探针成分分析,认为石榴子石白云母片岩中的石榴子石具有多期次变质结晶的特征,保留了岩石多期次变质的信息。结合岩石组构特征,最终确定石榴子石白云母片岩至少经历了3期次的变质作用。第一、二期均为绿片岩相,当时岩石不具定向构造且未达到高压;第三期为低温高压蓝片岩相变质作用,与区域上蓝片岩的形成及榴辉岩的蓝片岩相退变质作用大体同时,该期变质变形作用形成了岩石的片理,最终成为石榴子石白云母片岩,变质作用时代为218Ma左右。 相似文献
9.
藏北龙木错—双湖—澜沧江板块缝合带发现晚石炭世—早二叠世洋岛型岩石组合 总被引：1，自引：1，他引：0
天泉群岛出露于龙木错—双湖—澜沧江板块缝合带的中西段,也是目前该缝合带上所发现的第一套洋岛型岩石组合。通过野外踏勘、剖面测制等对天泉群岛进行了较为详细的研究,结果显示,天泉群岛由9个孤立、岩石组合不同的洋岛组成,其中独泉沟洋岛、屏风岭洋岛的洋岛组分齐全,见玄武岩、灰岩、砾岩、硅质岩等,其他洋岛的洋岛组分不全。天泉群岛与展金组复理石沉积为整合接触,表明其形成时代为晚石炭世—早二叠世。天泉群岛的厘定,说明龙木错—双湖—澜沧江大洋在晚石炭世—早二叠世仍具有成熟的洋壳。该项研究进一步丰富了龙木错—双湖—澜沧江板块缝合带的演化内容,为反演区域地质演化历史提供了依据。 相似文献
10.
羌塘中部高压变质带的形成过程 总被引：1，自引：1，他引：0
羌塘中部高压变质带由榴辉岩、石榴石白云母片岩和蓝片岩等组成,与蛇绿混杂岩、晚古生代浅变质地层岩片等共同构成了龙木错-双湖板块缝合带这一构造混杂岩带,是伴随古特提斯洋闭合的深俯冲作用及后期构造作用的产物。通过对其野外地质特征、不同岩石类型岩石学、矿物学以及同位素年代学等的研究,确认榴辉岩和石榴石白云母片岩在早期分别经历了各自的形成过程,在榴辉岩形成之后的折返过程中二者共同构成了高压变质带,并且在折返过程中榴辉岩发生蓝片岩相退变质作用,同时导致了带内蓝片岩的形成。同位素年代学研究结果表明,龙木错-双湖板块缝合带闭合过程中的榴辉岩相变质作用发生于240Ma左右,折返过程中的蓝片岩相退变质作用及蓝片岩的形成应在220～200Ma,高压变质带最终在214Ma之前抬升出露地表。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
14.
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
20.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献