共查询到20条相似文献，搜索用时 453 毫秒
1.
本文报道了浙江东阳发现的中国第2个翼龙足迹化石点, 也是亚洲发现的第8个翼龙足迹化石点。化石足迹产于晚白垩世早期方岩组的紫红色泥质粉砂岩中。发现有3个手的印迹和1个右足印。手的印迹的长宽分别为6.5 cm 和4cm. 非对称具有3个指的印迹。足迹9 cm长和1.5 cm宽。该足迹不同于以前发现的, 可能代表一新的类型。除了翼龙足迹外, 还发现鸟类、小型兽脚类、鸟脚类及蜥脚类脚印, 形成一个丰富的动物群, 它的发现为研究该地区的古生态环境及古地理具有重要意义。同时为以后在该地区发现这些造迹动物的骨骼化石提供了重要依据。 相似文献
2.
报道了在宁夏固原首次发现的恐龙足迹化石。该恐龙足迹化石分别为鸟脚类恐龙足迹和蜥脚类恐龙足迹,均发现于早白垩世李洼峡组沉积地层中。其中的鸟脚类恐龙足迹命名为六盘山宁夏足印 ( Ningxiapus liupanshanensis ichnogenus et inchnosp． nov． ) 。六盘山宁夏足印长与宽之比为1. 22; 第I 趾纤细,短于第IV 趾; 第II 趾与第III 趾之间夹角为35°,第III 趾与第IV 趾之间夹角为45° 等特征区别于其他鸟脚类恐龙脚印。新发现的蜥脚类恐龙以足迹化石形式保存,其前、后足印的长度大小分别为36 cm 和15 cm,应为中等大小的蜥脚类恐龙所留下。这些恐龙足迹化石的发现,为研究该地区的古生物地理及古生态的恢复以及为将来在该地区发现恐龙骨骼化石提供重要信息。 相似文献
3.
基于恐龙足迹重建攀西地区白垩纪恐龙动物群 总被引：2，自引：2，他引：0
攀西地区没有白垩纪恐龙骨骼化石记录,对该区白垩纪恐龙动物群组合的认识尚属空白。1991年,攀西地区首次发现了恐龙足迹,此后陆续发现了8个足迹点。这些足迹点共发现9种不同的非鸟恐龙足迹(6种非鸟兽脚类、1种蜥脚类和2种鸟脚类足迹),以及翼龙和龟类足迹。共11种足迹形态类型由185道行迹(与孤立足迹)组成,可能代表着同等数量的造迹者。其中飞天山组的组合多样性最强,小坝组和雷打树组较弱。这个相对全面的足迹数据库,为该地区白垩纪四足类的古生态学普查提供了动物群的组成信息,这在该缺乏骨骼化石的地区显得尤为重要。 相似文献
4.
本文记述了河南省义马县中侏罗世地层中首次发现的大型兽脚类恐龙足印。该足印虽然与发现于下—中侏罗统的张北足印类似,但是又不完全相同,从而命名为该属的一新种:徐氏张北足印(新足迹种):Changpeipus xuianainchnosp. nov.。它具有以下特征:足印的长度与宽度的比率约为1.9,第Ⅱ趾长度稍短于第Ⅳ趾的长度;第Ⅱ和第Ⅲ趾之间的夹角约为25°;第Ⅲ和第Ⅳ趾之间的夹角约为32°,足印的后部具有蹠骨所留下的印痕。徐氏张北足印的发现,不仅为我国中侏罗世恐龙足印增加了新的成员,而且为将来在该地区中侏罗世的地层中发现大型兽脚类恐龙骨骼化石提供确凿的依据。 相似文献
5.
6.
四川西昌盆地白垩系小坝组尚未发现骨骼化石记录,其白垩系恐龙动物群的信息全赖于足迹化石。2017年,在喜德县洛甘发现小坝组迄今最大型的恐龙足迹群。该足迹点保存了大量的兽脚类足迹。足迹保存条件较差,但具备了基本的形态学特征。总体来看,兽脚类足迹具有尺寸较小(8~13cm),中等中趾前凹(0.5~0.6)和第Ⅱ趾和第Ⅳ趾间较宽趾间角(70°~100°)的特征;少量足迹保存了跖骨垫。初步分析认为,洛甘兽脚类足迹与四川盆地夹关组的兽脚类足迹Eubrontes和Grallator形态类型相似,为两地在白垩纪中期具有类似的恐龙动物群的观点提供了新的证据。该发现对于西昌盆地的古气候、古地理和地层对比都具有重要的意义,足迹详细分类还有待进一步研究。 相似文献
7.
甘肃省永靖县盐锅峡发现大型蜥脚类恐龙足迹 总被引：1，自引：1，他引：1
甘肃永靖盐锅峡下白垩统河口群盐锅峡组发现大量恐龙足迹化石 .初步调查发现了 10个化石点 2 93个足印化石 .其中在 1号点 6 0 0m2 的发掘面上 ,保存有 7组蜥脚类 138个足印、9组兽脚类 6 0个足印、1组鸟脚类 3个脚印和 1组翼龙类 11个足印 .7组蜥脚类足印形成4组保存完好的行迹和 3组的足迹组合 .最大的蜥脚类足印化石前脚 790mm× 112 0mm ,后脚 15 0 0mm× 14 2 0mm ,是目前发现的世界上最大的恐龙足印之一 .盐锅峡蜥脚类恐龙足迹可以分为 3种类型 :第 1类足迹前脚为新月形 ,后脚为椭圆形 ,前后足印不重合并均向外偏转 ;第 2类足迹前脚为半圆形 ,后脚为椭圆形 ,前后足印部分重合 ,后脚印向外偏转 ;第 3类足迹前脚半圆形 ,后脚U形 ,前后足印明显分离并均向外偏转 .蜥脚类恐龙足迹向外偏转反映恐龙成“外八字”型行走 ,这种行进方式可能与其巨大的体重有关 .根据计算 ,盐锅峡蜥脚类恐龙臀高最小为 3.0 4m ,最大可达到 5 .3m .恐龙行走的速度 2 .3～ 3.4km/h .古环境、古地理分析认为白垩纪甘肃兰州—青海民和一带为一内陆淡水湖盆 .盐锅峡一带的恐龙足迹化石就发现于最近湖中心的“雾宿山古岛”西侧湖岸上 .虽然白垩纪当地气候并不湿润 ,但湖岸地区草肥水美 ,是恐龙及其他陆生生物的乐园 . 相似文献
8.
9.
10.
藏东昌都地区阿涅塘化石点中侏罗世达布卡组滨湖相紫红色中-细砂岩中,发现以凸形迹完好地保存的4层恐龙足迹,包括Grallator类、大型兽脚类、小型兽脚类和小型蜥脚类等足迹类型,并构成两列完美的行迹. 组成行迹T1的4个Grallator类足迹被命名为Grallator anietangensis isp. nov.,对其进行了详细的形态学分析,并讨论了造迹恐龙的大小和运动状态,这是Grallator类足迹在西藏地区的首次发现. 组成行迹T2的9个大型兽脚类足迹被归为Theropoda igen. et isp. indet.,对该类足迹进行了形态描述和功能分析;这类足迹在中国是首次记录,其连续且清晰的尾迹表明造迹者并非处于正常运动状态,而是应对某种特殊境况的特别行为方式,即其正以昂起的前躯一边观察,一边以极低的速度前进,因前躯昂起,尾部相应下垂,从而留下尾迹. 两列行迹均显示出造迹者正沿古昌都湖岸前进. 中国迄今所发现的恐龙骨骼和Grallator类足迹化石主要表现为以西南地区为中心,再向四周不断发散的扩散模式,但Grallator类足迹化石综合提供的信息显示恐龙动物的扩散速度比骨骼化石反映的速度更快. 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献