共查询到20条相似文献，搜索用时 187 毫秒
1.
2.
新疆东准噶尔卡拉麦里地区以金水泉、双泉、南明水、苏吉泉东等为代表的金矿床,构成了一套与晚古生代碰撞造山有关的金成矿系统。矿床夹持于区域性的卡拉麦里深大断裂和清水—苏吉泉大断裂之间,矿化受次级脆-韧性断层控制,以中等至陡倾斜的含金石英脉和破碎蚀变岩的形式产于晚古生代浅变质火山沉积岩中。流体包裹体、H-O-S-Pb同位素和热液锆石U-Pb年代学研究表明,成矿流体具中高温(集中于240~330 ℃)、低盐度(<6% NaCleq)、富CO2的变质流体特征,成矿物质来自赋矿的火山沉积岩系,流体不混溶(相分离)和水-岩反应(围岩硫化作用)是导致金沉淀的主要机制,成矿深度变化于7~15 km之间,成矿时代约为314 Ma。晚石炭世至早二叠世,研究区的构造体制由挤压向走滑或走滑伸展转换,构造应力的释放导致深部变质脱水形成的低盐度CO2-H2O-NaCl±CH4含金流体,沿走向NW至近EW向的走滑剪切断裂向地壳浅部流动,并在脆-韧性过渡带或脆性变形带的次级断裂中形成含金石英脉及蚀变岩型金矿石。 相似文献
3.
八卦庙金矿是秦岭造山带唯一的超大型金矿床,曾被认为是微细浸染型(卡林型)金矿。但最新研究表明该矿床金为粗粒可见金,矿床空间定位和矿体展布受二里河—长沟—八卦庙—空棺沟脆-韧性剪切带控制,矿区内岩石剪切变形特征明显。在脆韧性剪切过程中形成了NW向顺层无根揉皱状含金石英脉,石英脉Ar-Ar坪年龄为(232.58±1.59)Ma,等时线年龄为(222.14±3.45)Ma,是印支期脆-韧性剪切-动力变质分异的产物。这种NW向石英脉含金1×10-6～4×10-6。在燕山早期,剪切带抬升进入浅层叠加了脆性变形,在热液作用下形成了NE向石英脉。NE向石英脉是重要的富矿石,含金4×10-6以上。石英强烈的脆-韧性变形特点记录了两期变形,从早到晚石英位错和差应力具从大到小的演化趋势。韧性剪切和后期脆性变形每一期构造-热液脉动式活动都是从早到晚△σ值降低,在两次脉动式活动的交替时期出现的构造亚稳定期成矿,应力周期形成的“应力泵”或“地震泵”作用是金矿成矿的力学机制。 相似文献
4.
南秦岭宁陕断裂镇安段北缘的龙脖子剪切带记录了宁陕断裂带左行走滑韧性剪切变形过程。带内3类石英脉体和方解石脉体的ESR年龄分别为125.6～88.7Ma、56.7～32.9Ma和19.8～14.6Ma。其中第一类产出于构造片理和A型褶皱核部的石英脉体,代表左行走滑韧性剪切变形结束、脆性构造活跃的时代。研究表明,宁陕左行走滑剪切带在晚三叠世早期开始活动,且可能持续到早—中侏罗世。第一类脉体年龄的确定表明,宁陕断裂带左行走滑韧性剪切变形最晚可持续到早白垩世;晚白垩世—始新世,宁陕断裂带以伸展-走滑脆性或韧-脆性剪切变形为主。因此,早白垩世是宁陕断裂带韧性剪切变形向脆性剪切变形转换的关键时期。宁陕断裂带经历了晚三叠世—中侏罗世晚期快速冷却阶段、晚侏罗世—白垩纪缓慢冷却阶段和古近纪以来快速冷却阶段。宁陕断裂带在缓慢冷却晚期(早白垩世)实现韧性剪切变形向脆性剪切变形转换说明,早白垩世也是秦岭造山带陆内变形机制转变的关键时期。 相似文献
5.
肥东花岗质岩脉的变形及年代学特征对郯庐断裂带早白垩世构造活动的指示 总被引：1，自引：1，他引：0
郯庐断裂带肥东段位于大别造山带与苏鲁造山带之间。在肥东段西韦采石场内发育了大规模的北北东向左行走滑韧性剪切带和一条低角度的韧性滑脱正断层。走滑韧性剪切带为郯庐断裂带走滑活动的产物,低角度滑脱正断层则代表了伸展背景下的构造活动。低角度滑脱正断层上、下盘发育未变形和变形的岩脉,走滑韧性剪切带内外也发育有受剪切带活动而变形的岩脉。对采石场内岩脉的构造和同位素年代学研究表明,低角度韧性滑脱正断层在129~126Ma之间发生过剪切活动,走滑韧性剪切带的活动时间在125Ma之后。综合研究认为,郯庐断裂带的伸展活动可能开始于早白垩世早期(130Ma),但在早白垩世并非一直处于伸展活动之中,125Ma之后的左行走滑活动很可能发生在早白垩世的晚期。 相似文献
6.
新疆东准噶尔卡拉麦里构造带多期变形和金叠加成矿 总被引：1，自引：0，他引：1
卡拉麦里韧-脆性剪切构造带形成于华力西中晚期,分属碰撞造山挤压和伸展造山走滑-伸展2个构造变形期,历经逆冲推覆、左行走滑、右行走滑和伸展4个主要演化阶段,金成矿空间上分布于碰撞期逆冲推覆型韧性剪切带中,成矿发生在转换造山及伸展造山时期,属C2-P(290～260Ma)走滑伸展阶段成矿事件。构造变形对金成矿的控制作用在空间上表现为深部构造层次韧性变形与其之上的中浅构造层次的韧脆性和脆性变形存在地质间断,金成矿与韧脆性、脆性变形同步且与韧性变形呈明显叠加复合关系,赋矿韧脆性和脆性构造统一于右行走滑剪切-伸展成矿体系中,具有不同的构造变形层次、变形特征和矿化特征。构造与金成矿空间叠加关系,有相应的两期成矿年龄响应和多阶段、多物质复合成矿的记录,代表一种时间有早晚、空间有重叠、物质来源多成因的叠加复合成矿关系。构造带韧-脆性变形转换与金成矿活动是区域构造背景发生明显转换过程中的多期变形和叠加成矿的形成机制,(成矿)动力学背景分别代表了碰撞造山期的逆冲推覆韧性变形、碰撞造山-伸展造山转变期的右行走滑韧脆性变形和金初始成矿、伸展造山期的脆性变形和金主成矿活动。与周围地质体的时间、物质关系探讨表明,金成矿受火山质围岩矿源层、构造生成演化及华力西晚期碱性花岗质岩浆侵位活动三大因素控制。 相似文献
7.
含金剪切带蚀变特征及其与金成矿的关系——以新疆天格尔金矿带为例 总被引：1，自引：0，他引：1
含金剪切带剪切变形过程中构造、流体-岩石相互作用导致系统内组分的迁移和再分配，这些过程控制着含金剪切带内蚀变特征及其金的成矿作用。在含金剪切带脆-韧性变形域内，成矿层次从深到浅矿石类型由蚀变糜棱岩型向石英脉型过渡，矿床成因类型由韧性剪切带型向蚀变破碎带型过渡，是主期剪切成岩成矿过程中不同时空演化阶段的产物。 相似文献
8.
对产于布尔根大型剪切带中的科克萨依和阿拉塔斯2个金矿含金绢英质糜棱岩中的云母类矿物进行了连续激光阶段升温Ar-Ar法同位素测年,获得坪年龄分别为(274.5±2.2)Ma和(282.6±2.2)Ma,对应的等时线年龄分别为(275.8±5.2)Ma和(283.1±5.2)Ma,表明含金剪切带韧-脆性剪切活动的时代以及金成矿时代为早二叠世初。结合区域地质资料说明,布尔根含金剪切带的成生演化主要受早二叠世(290～270Ma)西伯利亚板块南缘巨型额尔齐斯剪切带区域性左行韧性剪切相伴的构造-岩浆热事件控制,其地球动力学背景为造山带构造演化的后碰撞伸展构造环境。 相似文献
9.
澜沧江构造带是青藏高原东南缘保山-羌塘地块与兰坪-思茅地块之间的大型走滑剪切带。构造地质学、岩石学和40Ar-39Ar年代学研究结果表明构造带中段剪切带内部存在早期斜向挤出和晚期水平走滑的两期线理及早期指示右行韧性剪切变形、后期指示左行脆韧性剪切变形的构造指向。糜棱岩中石英晶格优选方位以中温(450~600℃)柱面a轴底面滑移系为主,叠加中低温(300~550℃)底面a轴滑移系;剪切带内云母片岩和花岗质糜棱岩中黑云母40Ar-39Ar坪年龄和等时线年龄都分布于15~17Ma,反映剪切带隆升过程中脆韧性左行剪切变形阶段的时代。结合前人成果进行分析认为新生代早期保山地块和兰坪-思茅地块向南南东挤出的同时沿澜沧江构造带中段发生大规模右行斜向走滑韧性剪切作用,后期保山地块南部沿北东向畹町和南汀河左行断裂带相对中北段向北东运动,致使隆升到中上构造层次的韧性剪切带发生左行脆韧性变形。 相似文献
10.
金山金矿产于赣东北断裂带的次级剪切带中,其成矿作用与韧性剪切带的动力变质作用密切相关。本文通过对矿区金矿体的地质特征和运动学特征的分析,认为金山金矿成矿期经历了两期韧性剪切作用,即早期由NNW向SSE的韧性推覆剪切,晚期沿NE方向的左行韧性走滑剪切,分别形成NW向超糜棱岩型矿体和NE方向石英脉型矿体,两期韧剪变形均发生在新元古代,对应于江南造山带在碰撞造山阶段和后造山伸展阶段的动力变质事件。成矿后,矿区先受到NW向的挤压应力场作用,形成NE走向的逆断层、NW走向的张性断层以及SN走向的左行压扭断层,之后转为NW向的拉张应力场,形成NE走向的正断层。金山金矿床的构造变形特征指示了赣东北断裂带活动的阶段性,赣东北地区在晋宁期经历了两期构造-岩浆-变质事件;加里东-印支期构造活动比较弱;燕山期本区构造-岩浆活动强烈,引起赣东北断裂带的再次活动。 相似文献
11.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
14.
Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations. 相似文献
15.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
16.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
17.
18.
19.
《Chemical Geology》2007,236(1-2):13-26
We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l− 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO2. 相似文献
20.
The Samchampi-Samteran alkaline igneous complex (SAC) is a near circular, plug-like body approximately 12 km2 area and is emplaced into the Precambrian gneissic terrain of the Karbi Anglong district of Assam. The host rocks, which
are exposed in immediate vicinity of the intrusion, comprise granite gneiss, migmatite, granodiorite, amphibolite, pegmatite
and quartz veins.
The SAC is composed of a wide variety of lithologies identified as syenitic fenite, magnetite ± perovskite ± apatite rock,
alkali pyroxenite, ijolite-melteigite, carbonatite, nepheline syenite with leucocratic and mesocratic variants, phonolite,
volcanic tuff, phosphatic rock and chert breccia.
The magnetite ± perovskite ± apatite rock was generated as a cumulus phase owing to the partitioning of Ti, Fe at a shallow
level magma chamber (not evolved DI = O1). The highly alkaline hydrous fluid activity indicated by the presence of strongly
alkalic minerals in carbonatites and associated alkaline rocks suggests that the composition of original melt was more alkalic
than those now found and represent a silica undersaturated ultramafic rock of carbonated olivine-poor nephelinite which splits
with falling temperature into two immiscible fractions—one ultimately crystallises as alkali pyroxenite/ijolite and the other
as carbonatite. The spatial distribution of varied lithotypes of SAC and their genetic relationships suggests that the silicate
and carbonate melts, produced through liquid immiscibility, during ascent generated into an array of lithotypes and also reaction
with the country rocks by alkali emanations produced fenitic aureoles (nephelinisation process). Isotopic studies (δ18O and δ13C) on carbonatites of Samchampi have indicated that the δ13C of the source magma is related to contamination from recycled carbon. 相似文献