共查询到20条相似文献，搜索用时 78 毫秒
1.
东天山四顶黑山地区545Ma层状镁铁质-超镁铁质岩体的发现及其大地构造学和成矿学意义 总被引：4，自引：0，他引：4
在东天山四顶黑山地区元古代深变质地层中发现层状镁铁质-超镁铁质岩体,研究了它的产状、岩石类型、结构构造、矿物组成、稀土微量元素地球化学、年代学等特征及其发现的地质意义。层状镁铁质-超镁铁质岩为后侵位的镁铁质杂岩体和花岗岩所穿切与破坏,其正堆晶结构发育,并可划分出两个结晶与演化旋回。四顶黑山层状钱铁质-超镁铁质岩的稀土微量元素含量和配分结构与该地区镁铁质杂岩、及图拉尔根镁铁质-超镁铁质岩体明显不同,具低∑REE、正δEu 异常、高 Sr 低Rh、高 Nb/U 值、及 Nb、Zr 和 Hf 亏损等地球化学特征,该特征与裂谷成因的攀枝花层状辉长岩和曹家村层状岩体非常相似,这意味着四顶黑山层状镁铁质-超镁铁质岩可能也形成于裂谷构造环境。选择层状镁铁质-超镁铁质岩体下部韵律层顶部辉石角闪石岩、镁铁质杂岩体闪长岩和角闪花岗岩中的角闪石开展~(39)Ar/~(40)Ar 定年,结果显示3种岩体分别形成于545±5Ma、263.8±2.6Ma 和200.8±0.91Ma。四顶黑山545Ma 裂谷成因层状镁铁质-超镁铁质岩体的发育,意味着早寒武世是天山地区镁铁质-超镁铁质岩型 Cu-Ni 矿的成矿期之一,天山地区在元古宙变质岩为基底的古大陆在早寒武世出现了雏形裂谷构造,545Ma可能是古天山洋形成的初始期。 相似文献
2.
吉林省永吉县头道沟地区出露许多与头道沟岩组相伴产出的镁铁—超镁铁质岩,鉴于其处于长春-延吉构造带附近而受到业内关注,但由于缺少高精度年代学资料,制约了对区域大地构造的深入研究。本文采用锆石U-Pb(LA-ICP-MS)方法,对镁铁—超镁铁质岩进行了年代学研究。变质辉绿岩年龄为270±5 Ma,变质橄榄岩中捕获锆石最小年龄为297 Ma,考虑岩石组合及二者紧密相伴产出,认为二者均形成于中二叠世。镁铁—超镁铁质岩中捕获的锆石记录了华北克拉通及其北缘多次重要的构造热事件。其中,变辉绿岩中获得446±6 Ma的年龄与变质橄榄岩中获得的不一致线下交点434±240 Ma年龄共同对应了华北克拉通北缘早古生代的重要构造岩浆热事件;大量的1.8~2.4Ga年龄对应古元古代辽吉造山带热事件;1377 Ma、1542 Ma与蓟县系建造时代对应;869~997 Ma与青白口系建造时代对应;在变质辉绿岩中还存在众多3.0~3.2Ga锆石年龄。分析上述年龄结构及龙岗陆块北缘古生代地质体分布特征,推测研究区深部可能存在古老的变质基底,同时也表明研究区出露的镁铁—超镁铁质岩形成于陆内构造环境,而非蛇绿岩的组成成分,这对深化区域大地构造研究具有重要意义。 相似文献
3.
青海同仁县隆务峡地区首次发现镁铁质——超镁铁质岩带 总被引：10，自引：4，他引：10
在青海省同仁县隆务峡南段的二叠纪地层中首次发现了北西—南东向分布的镁铁质—超镁铁质岩带,命名为隆务峡镁铁质—超镁铁质岩带。该岩带的岩石组合包括纯橄岩、辉石橄榄岩、辉长岩、辉绿岩、枕状玄武岩等。从超镁铁岩—下部堆晶岩—辉绿岩—上部堆晶岩,其稀土元素总量逐渐增加,稀土元素配分型式总体一致,从超镁铁岩的Eu正异常到上部辉长岩的Eu负异常,显示了各岩石间的同源性。根据对其两侧沉积岩中化石的研究,推测该镁铁质—超镁铁质岩带的形成时代为二叠纪。该岩带位于西秦岭造山带与祁连造山带的接舍部,对于揭示秦岭和祁连接合部的大地构造演化有重要意义。 相似文献
4.
四顶黑山岩体主要由超镁铁质岩和镁铁质岩组成。超镁铁质岩由橄榄岩、角闪橄榄岩、辉橄岩、辉石岩等组成;镁铁质岩由辉长岩、角闪辉长岩、橄榄辉长岩等组成。本次对辉长岩进行了全岩Sm-Nd同位素分析,得到的等时线年龄为327±9.0Ma,初始εNd（t）=＋3.97,表明镁铁质—超镁铁质岩中辉长岩形成于早石炭世末。属于富集地幔向亏损地幔过渡类型。这一年龄的确定,为探讨北山—天山结合部晚古生代镁铁质—超镁铁质岩的成因机制和该区的区域地质演化提供了有效的年代学依据。 相似文献
5.
内蒙古乌拉特中旗地处华北陆块北缘西段,大地构造分区属于狼山-白云鄂博陆缘裂谷。区域上,镁铁质-超镁铁质岩呈东西向带状分布,断续出露长约300km,宽约30km。该镁铁质-超镁铁质岩带内铜镍矿床(点)较为发育,克布为该带内一个中-小型铜镍硫化物矿床。克布镁铁质-超镁铁岩体出露面积约45km2,主要由辉长岩相和橄榄岩相组成,辉长岩相为岩体的主要岩相,橄榄岩相为主要的赋矿岩石,两个相带相伴产出,呈渐变过渡关系。本文采用LA-ICP-MS锆石U-Pb法测年,获得克布斜长方辉橄榄岩年龄为258.1±1.8Ma(MSWD=2.3),属于晚二叠世。岩石主、微量及稀土元素分析结果表明,岩石样品属铁质镁铁质-超镁铁质岩,具有拉斑玄武岩系列演化趋势,并相对富集大离子亲石元素(Rb、Sr、Ba),亏损高场强元素(Nb、Ta、Zr、Hf、Ti),以及具有轻稀土富集[(La/Yb)N=2.47~11.29]的右倾型稀土配分模式。以橄榄石-熔体平衡原理估算克布镁铁质-超镁铁质岩体母岩浆的MgO含量为10.1%,FeO为12.1%,应为高镁的拉斑玄武质岩浆。综合分析认为,克布镁铁质-超镁铁质岩体应形成于后碰撞伸展阶段,岩浆源区由被消减板片交代的地幔楔物质和软流圈物质组成。橄榄石和辉石等富镁铁矿物的分离结晶和富硅地壳物质的混染可能对硫化物熔离富集成矿起到了关键性作用。 相似文献
6.
为探讨镁铁质-超镁铁质岩的岩石学特征及成岩成矿作用时间序列, 完善区域成岩成矿年代学格架, 对平川地区的镁铁质-超镁铁质岩进行了元素地球化学分析和LA-ICP-MS锆石U-Pb定年.测试结果显示, 黄草坪辉长岩成岩年龄为259.7±1.2 Ma, 其捕获锆石结晶年龄为269.8±2.4 Ma, 辉绿(玢)岩等次火山岩参考成岩年龄为248± Ma, 其变质锆石年龄为67± Ma.研究结果表明, 平川地区的镁铁质-超镁铁质岩产出于大陆裂谷环境, 岩浆源区来自上地幔尖晶石相二辉橄榄岩, 为一套同源异相有利于铁矿化形成的富钠质拉斑玄武质岩石系列.岩浆活动开始孕育时间不晚于269.8±2.4 Ma, 大规模岩浆活动发生于259.7±1.2 Ma, 其约束了岩浆分异型和火山喷发(溢)沉积型矿化的成矿时间, 次火山岩的成岩年龄约束了次火山热液型矿化的成矿时间上限, 变质锆石U-Pb年龄记录了平川地区经历了喜马拉雅期陆内造山作用.平川地区构造岩浆活动具有爆发性、阶段性和成矿专属性等特点, 镁铁质-超镁铁质岩的形成可能与岩石圈的大规模减薄作用有关, 攀西地区海西-印支期的成岩-成矿作用为同源岩浆受区域统一深部地球动力学背景约束演化的异相产物. 相似文献
7.
8.
9.
通过1:250 000衢州区域地质调查,在武夷地块浙西南地区发现古元古代镁铁质-超镁铁质岩石。该套岩石在金华、龙游-带呈面状分布,金华张村出露最为完整,主要由辉石角闪石岩、角闪石岩、斜长阳起石岩、斜长辉石岩和斜长角闪岩等组成。对辉石角闪石岩与阳起石岩开展了LA-ICP-MS锆石U-Pb测年分析,分别获得其成岩年龄为1 834±14 Ma(MSWD=0.23,N=16)、1 839±17 Ma(MSWD=0.22,N=11),暗示这套镁铁质-超镁铁质岩石为古元古代岩浆活动的产物。这一发现表明,约1 830 Ma武夷地块处于板内伸展构造环境,同时该时期武夷地块已经具备足够的刚性,以致产生大规模的脆性破裂以及可能由地幔对流作用引发的基性岩浆活动,推测在约1.83 Ga武夷地块已经具有克拉通的性质。 相似文献
10.
阿拉善地块南缘是镁铁质—超镁铁质岩体的重要分布区,自北向南可分为北大山岩带、龙首山岩带和北海子岩带。本文主要以北大山岩带为研究对象,通过对野芨里岩体、青疙瘩岩体及鄂博沟岩体的岩石学、岩石地球化学、微量元素、稀土元素等研究,探讨了北大山镁铁质—超镁铁质岩体的成因类型和形成构造环境。3个岩体主量元素特征显示Mg#=76~87,橄榄岩类w(Al2O3)=3.2%~5.2%,但辉长岩、辉绿岩类明显高于该值,说明北大山镁铁质—超镁铁质岩熔融程度整体不高,该区岩体属于镁质超基性岩,并且具有富铁趋势;稀土元素特征显示稀土总量(ΣREE)在5.68×10-6~11.5×10-6之间,野芨里岩体LREE稍富集,而青疙瘩及鄂博沟岩体LREE明显富集;微量元素特征显示北大山镁铁质—超镁铁质岩体的成岩构造环境为板内拉张环境,岩浆在侵位过程中受到上地壳的混染作用,微量元素原始地幔标准化蛛网图显示Ni明显亏损,有利于镍成矿。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献