Best practices for the use of meteorite names in publications     

Philipp R. Heck  Christopher Herd  Jeffrey N. Grossman  Dmitry Badjukov  Audrey Bouvier  Emma Bullock  Hasnaa Chennaoui‐Aoudjehane  Vinciane Debaille  Tasha L. Dunn  Denton S. Ebel  Ludovic Ferrire  Laurence Garvie  Jrme Gattacceca  Matthieu Gounelle  Richard Herd  Trevor Ireland  Emmanuel Jacquet  Robert J. Macke  Tim McCoy  Francis M. McCubbin  Takashi Mikouchi  Knut Metzler  Mathieu Roskosz  Caroline Smith  Meenakshi Wadhwa  Linda Welzenbach‐Fries  Toru Yada  Akira Yamaguchi  Ryan A. Zeigler  Michael Zolensky 《Meteoritics & planetary science》2019,54(7):1397-1400

  相似文献   

Fine‐structures of planar deformation features in shocked olivine: A comparison between Martian meteorites and experimentally shocked basalts as an indicator for shock pressure     

Atsushi Takenouchi  Takashi Mikouchi  Takamichi Kobayashi  Toshimori Sekine  Akira Yamaguchi  Haruka Ono 《Meteoritics & planetary science》2019,54(9):1990-2005

We performed shock recovery experiments on an olivine‐phyric basalt at shock pressures of 22.2–48.5 GPa to compare with shock features in Martian meteorites (RBT 04261 and NWA 1950). Highly shocked olivine in the recovered basalt at 39.5 and 48.5 GPa shows shock‐induced planar deformation features (PDFs) composed of abundant streaks of defects. Similar PDFs were observed in olivine in RBT 04261 and NWA 1950 while those in NWA 1950 were composed of amorphous lamellae. Based on the present results and previous studies, the width and the abundance of lamellar fine‐structures increased with raising shock pressure. Therefore, these features could be used as shock pressure indicators while the estimated pressures may be lower limits due to no information of temperature dependence. For Martian meteorites that experienced heavy shocks, the minimum peak shock pressures of RBT 04261 and NWA 1950 are estimated to be 39.5–48.5 GPa and 48.5–56 GPa, respectively, which are found consistent with those estimated by postshock temperatures expected by the presence of brown olivine. We also investigated shock‐recovered basalts preheated at 750 and 800 °C in order to check the temperature effects on shock features. The results indicate a reduction in vitrifying pressure of plagioclase and a pressure increase for PDFs formation in olivine. Further temperature‐controlled shock recovery experiments will provide us better constraints to understand and to characterize various features found in natural shock events.  相似文献   

The effects of possible contamination by sample holders on samples to be returned by Hayabusa2     

Naoki Shirai  Yuzuru Karouji  Kazuya Kumagai  Masayuki Uesugi  Kaori Hirahara  Motoo Ito  Naotaka Tomioka  Kentaro Uesugi  Akira Yamaguchi  Naoya Imae  Takuji Ohigashi  Toru Yada  Masanao Abe 《Meteoritics & planetary science》2020,55(7):1665-1680

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.  相似文献   

Cathodoluminescence of high-pressure feldspar minerals as a shock barometer     

Masahiro Kayama  Toshimori Sekine  Naotaka Tomioka  Hirotsugu Nishido  Yukako Kato  Kiyotaka Ninagawa  Takamichi Kobayashi  Akira Yamaguchi 《Meteoritics & planetary science》2018,53(7):1476-1488

Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.  相似文献   

Seasonal variations of the surface currents in the Tsushima Strait     

Yutaka Yoshikawa  Akira Masuda  Kenichi Marubayashi  Michiyoshi Ishibashi 《Journal of Oceanography》2010,66(2):223-232

Seasonal variations of the surface currents in the Tsushima Strait were investigated by analyzing the monthly mean surface currents measured with HF radar. Several new features of the surface currents have been found. One notable feature is the large, complicated seasonal variation in the current structure in the eastern channel of the strait. For example, in the southeastern and northwestern regions of the channel, southwestward countercurrents are found in summer while southeastward acrossshore currents are found in autumn and winter. The wind-driven flow (Ekman flow) as well as surface geostrophic currents are responsible for these complicated variations of the surface currents. To quantify each variation of the flow and current, the wind-driven flow was calculated from the monthly wind (more precisely, the friction velocity) using the monthly speed factor and deflection angle estimated in our previous study, and the surface geostrophic currents were then estimated by subtracting the wind-driven flow from the measured surface currents. It was found that the acrossshore currents are the wind-driven flow, and that the surface geostrophic currents flow almost in the along-shore direction, indicating the validity of the decomposition of the surface velocity into the wind-driven flow and the geostrophic currents using the speed factor and deflection angle. A real-vector empirical orthogonal function (EOF) analysis of the surface geostrophic currents shows a pair of eddies in the lee of Tsushima and Iki Islands as the first mode, which indicates that the southwestward countercurrents in the eastern channel are formed primarily by the incoming Tsushima Warm Current.  相似文献   

Secondary‐volatiles linked metallic iron in eucrites: The dual‐origin metals of Camel Donga          下载免费PDF全文

Paul H. Warren  Junko Isa  Mitsuru Ebihara  Akira Yamaguchi  Bastian Baecker 《Meteoritics & planetary science》2017,52(4):737-761

The unique occurrence of abundant (~1 vol%) near‐pure‐Fe metal in the Camel Donga eucrite is more complicated than previously believed. In addition to that component of groundmass metal, scattered within the meteorite are discrete nodules of much higher kamacite abundance. We have studied the petrology and composition of two of these nodules in the form of samples we call CD2 and CD3. The nodules are ovoids 11 (CD2) to 15 (CD3) mm across, with metal, or inferred preweathering metal, abundances of 12–17 vol% (CD2 is unfortunately quite weathered). The CD3 nodule also includes at its center a 5 mm ovoid clumping (6 vol%) of F‐apatite. Both nodules are fine‐grained, so the high Fe metal and apatite contents are clearly not flukes of inadequate sampling. The metals within the nodules are distinctly Ni‐rich (0.3–0.6 wt%) compared to the pure‐Fe (Ni generally 0.01 wt%) groundmass metals. Bulk analyses of three pieces of the CD2 nodule show that trace siderophile elements Ir, Os, and Co are commensurately enriched; Au is enriched to a lesser degree. The siderophile evidence shows the nodules did not form by in situ reduction of pyroxene FeO. Moreover, the nodules do not show features such as silica‐phase enrichment or pyroxene with reduced FeO (as constrained by FeO/MgO and especially FeO/MnO) predicted by the in situ reduction model. The oxide minerals, even in groundmass samples well away from the nodules, also show little evidence of reduction. Although the nodule boundaries are generally sharp, groundmass‐metal Ni content is anti‐correlated with distance from the CD3 nodule. We infer that the nodules represent materials that originated within impactors into the Camel Donga portion of the eucrite crust, but probably were profoundly altered during later metamorphism/metasomatism. Origin of the pure‐Fe groundmass metal remains enigmatic. In situ reduction probably played an important role, and association in the same meteorite of the Fe‐nodules is probably significant. But the fluid during alteration was probably not (as previously modeled) purely S and O, of simple heat‐driven internal derivation. We conjecture a two‐stage metasomatism, as fluids passed through Camel Donga after impact heating of volatile‐rich chondritic masses (survivors of gentle accretionary impacts) within the nearby crust. First, reduction to form troilite may have been triggered by fluids rich in S₂ and CO (derived from the protonodules?), and then in a distinct later stage, fluids were (comparatively) H₂O‐rich, and thus reacted with troilite to form pure‐Fe metal along with H₂S and SO₂. The early eucrite crust was in places a dynamic fluid‐bearing environment that hosted complex chemical processes, including some that engendered significant diversity among metal+sulfide alterations.  相似文献   

Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes     

H. Kit Miyamoto  Amir S. J. Gilani  Akira Wada  Christopher Ariyaratana 《地震工程与结构动力学》2010,39(11):1279-1297

Fluid viscous dampers are used to control story drifts and member forces in structures during earthquake events. These elements provide satisfactory performance at the design‐level or maximum considered earthquake. However, buildings using fluid viscous dampers have not been subjected to very large earthquakes with intensities greater than the design and maximum considered events. Furthermore, an extensive database of viscous damper performance during large seismic events does not exist. To address these issues, a comprehensive analytical and experimental investigation was conducted to determine the performance of damped structures subjected to large earthquakes. A critical component of this research was the development and verification of a detailed viscous damper mathematical model that incorporates limit states. The development of this model and the laboratory and simulation results conclude good correlation with the new model and the damper limit states and provide superior results compared with the typical damper model when considering near collapse evaluation of structures. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Magma transport and reservoir formation by a system of propagating cracks   总被引：2，自引：0，他引：2  

Akira Takada 《Bulletin of Volcanology》1989,52(2):118-126

A system of propagating cracks may explain magma transport and the evolution of a volcano. This paper considers only a basaltic magma. The system is controlled by two boundary conditions: the stress field, and the production rate of the magma-filled cracks in the mantle. Numerical solutions of crack propagation for various stress conditions, with a constant production rate high enough to coalesce isolated cracks, were performed, and the results applied to different tectonic conditions. For the hydrostatic stress conditions, most magma-filled cracks beneath a polygenetic volcano become trapped either in the lower crust, because there the density difference between magma and the host rocks () becomes suddenly small, compared with that in the mantle, or trapped in the upper crust, because there is near to zero. Magma traps composed of such cracks may grow into magma reservoirs if the production rate of cracks in the mantle is large. If horizontal stress with a vertical gradient is superimposed on the hydrostatic condition in the crust, that is, tensile stress which increases upward or compressional stress which increases downward, magmafilled cracks, even if the density of magma is higher than that of the crust, may ascend directly without trapping. When the crust undergoes relative tension, magma-filled cracks may become trapped. Then, the lower part of the trap may grow into a magma reservoir, while the upper part may become filled with dikes. When the production rate of cracks is small, an initial magma-filled crack can rise directly to the surface only when the stress with a gradient is superimposed as mentioned above, or when the average density in a crack decreases, owing to, for example, vesiculation of volatile components.  相似文献   

Partial melting kinetics of plagioclase-diopside pairs     

Akira Tsuchiyama 《Contributions to Mineralogy and Petrology》1985,91(1):12-23

Partial melting experiments on plagioclase (An₆₀) and diopside have been carried out using pairs of large crystals to investigate textures and kinetics of melting. The experiments were done at one atmosphere pressure as a function of temperature (1,190–1,307° C) and time (1.5–192 h). Melting took place mainly at the plagioclase-diopside contact planes. Reaction zones composed of fine mixtures of calcic plagioclase and melt were developed from the surface of the plagioclase crystal inward. There exists a critical temperature, below which only a few % melting can occur over the duration of the experiments. This sluggish melting is caused by slow NaSi-CaAl diffusion in plagioclase, because the plagioclase crystal must change its composition to produce albite-rich cotectic melts. Diffusion in the solid also affects the chemical composition of the melts. During initial melting, potassium is preferentially extracted from plagioclase because K-Na diffusion in plagioclase is faster than that of NaSi-CaAl. This also causes a shift in the cotectic compositions. Above the critical temperature, on the other hand, melting is promoted by a metastable reaction in which the plagioclase composition does not change, and which produces melts with compositional gradients along the original An₆₀-diopside tie line. The critical temperature is determined by the intersection of the cotectic and the An₆₀-diopside tie line. Interdiffusion coefficients of plagioclase-diopside components in the melt are estimated from melting rates above the critical temperature by using a simplified steady-state diffusion model (e.g., 10^–8 cm²/sec at 1,300° C).Many examples of reaction zones due to partial melting have been described as spongy or fingerprint-like textures in xenoliths. Metastable melting above the critical temperature is considered to take place in natural melting where there is a high degree of melting. However, we cannot exclude the possibility of disequilibrium created by sluggish melting controlled by diffusion in the minerals. If melting occurs close to the solidus, this process can be important even for partial melting in the upper mantle.  相似文献   

Dissolution kinetics of plagioclase in the melt of the system diopside-albite-anorthite,and origin of dusty plagioclase in andesites   总被引：9，自引：5，他引：9  

Akira Tsuchiyama 《Contributions to Mineralogy and Petrology》1985,89(1):1-16

The textures and kinetics of reaction between plagioclase and melts have been investigated experimentally, and origin of dusty plagioclase in andesites has been discussed. In the experiments plagioclase of different compositions (An₉₆, An₆₁, An₅₄, An₂₃, and An₂₂) surrounded by glasses of six different compositions in the system diopside-albite-anorthite was heated at temperatures ranging from 1,200 to 1,410° C for 30 min to 88 h. Textures were closely related to temperature and chemical compositions. A crystal became smaller and rounded above the plagioclase liquidus temperature of the starting melt (glass) and remained its original euhedral shape below the liquidus. Whatever the temperature, the crystal-melt interface became rough and often more complicated (sieve-like texture composed of plagioclase-melt mixture in the scale of a few m was developed from the surface of the crystal inward; formation of mantled plagioclase) if the crystal is less calcic than the plagioclase in equilibrium with the surrounding melt, and the interface remained smooth if the crystal is more calcic than the equilibrium plagioclase. From these results the following two types of dissolution have been recognized; (1) a crystal simply dissolves in the melt which is undersaturated with respect to the phase (simple dissolution), and a crystal is partially dissolved to form mantled plagioclase by reaction between sodic plagioclase and calcic melt (partial dissolution). The amount of a crystal dissolved and reacted increased proportional to the square root of time. This suggests that these processes are controlled by diffusion, probably in the crystal.Mantled plagioclase produced in the experiments were very similar both texturally and chemically to some of the so-called resorbed plagioclase in igneous rocks. Chemical compositions and textures of plagioclase phenocrysts in island-arc andesites of magma mixing origin have been examined. Cores of clear and dusty plagioclase were clacic (about An₉₀) and sodic (about An₅₀), respectively. This result indicates that dusty plagioclases were formed by the partial melting due to reaction between sodic plagioclase already precipitated in a dacitic magma and a melt of intermediate composition in a mixed magma during the magma mixing.  相似文献