深水钻井隔水管紧急脱离后的反冲响应   总被引：1，自引：0，他引：1  

李朝玮  樊洪海  汪志明  沈维格  王义顷 《海洋工程》2015,33(4):121-127

深水钻井中,在恶劣海况或浮式平台定位失效等情况下,需紧急断开隔水管与水下防喷器的连接。隔水管突然脱离后会加速向上反冲,如果反冲作用控制不当,可能威胁钻井平台、隔水管体和水下井口的安全。介绍了国外隔水管紧急脱离与反冲响应的研究情况,分析了隔水管紧急脱离的原因与程序、脱离后的反冲过程、反冲控制方式和成功脱离标准、反冲响应的分析方法。建议:由于南海深水海况复杂,作业者需制定紧急脱离的预案和作业规程,并进行紧急脱离操作培训;由于隔水管紧急脱离后的反冲响应涉及多个非线性瞬态过程,研究者应该开展隔水管紧急脱离测试和反冲响应模拟计算,开发隔水管反冲响应分析软件。  相似文献   

Experimental Study on Response Performance of VIV of A Flexible Riser with Helical Strakes   总被引：1，自引：1，他引：0  

高云  付世晓  曹静  陈一帆 《海洋工程》2015,29(5):673-690

Laboratory tests were conducted on a flexible riser with and without helical strakes. The aim of the present work is to further understand the response performance of the vortex induced vibration (VIV) for a riser with helical strakes. The experiment was accomplished in the towing tank and the relative current was simulated by towing a flexible riser in one direction. Based on the modal analysis method, the displacement responses can be obtained by the measured strain. The strakes with different heights are analyzed here, and the response parameters like strain response and displacement response are studied. The experimental results show that the in-line (IL) response is as important as the cross-flow (CF) response, however, many industrial analysis methods usually ignore the IL response due to VIV. The results also indicate that the response characteristics of a bare riser can be quite distinct from that of a riser with helical strakes, and the response performance depends on the geometry on the helical strakes closely. The fatigue damage is further discussed and the results show that the fatigue damage in the CF direction is of the same order as that in the IL direction for the bare riser. However, for the riser with helical strakes, the fatigue damage in the CF direction is much smaller than that in the IL direction.  相似文献   

基于半数值方法的限弯器剪弯刚度分析     

丁乐声  陈金龙  陈潇  郭豪  张聪 《海洋工程》2022,40(6):152-159

柔性管缆限弯器存在接触非线性导致剪弯刚度分析困难。为此先基于悬臂梁方程建立剪弯刚度理论模型;然后构建考虑接触边界的锁合结构数值模型,得到其扭转刚度曲线;最后结合理论分析和数值计算求得考虑接触非线性的限弯器剪弯刚度曲线,并同传统的整体数值方法相比较,验证该半数值分析方法的有效性。对比发现基于半数值方法的限弯器剪弯计算效率远高于传统数值方法,其结果误差也满足工程需求;并且限弯器锁合结构处受接触边界影响有明显的非线性;限弯器子梁这一短梁结构基于Timoshenko梁理论计算的结果精度更高也更保守。相较于传统数值方法,该半数值方法用方程直接表达部分参数与剪弯刚度关系,并可以高效地分析限弯器剪弯刚度,使设计工作更加高效。  相似文献   

深水钢悬链立管疲劳寿命评估分析     

董永强  宋儒鑫  孙丽萍 《海洋工程》2014,32(2):119-124

在时域内分析深水钢悬链立管在平台运动和波流载荷共同作用下的非线性动力响应;采用雨流计数法处理立管节点应力的时间历程,选用DoE.E型S-N曲线分析立管在单一海况和平台运动联合作用下的疲劳损伤;将各方向含概率分布的疲劳损伤进行叠加,得到立管整体的全方向疲劳损伤及疲劳寿命。平台的运动为六自由度的运动预报数据,波流载荷由某海域实际的波浪统计数据采用Morison公式计算所得。计算结果表明钢悬链立管疲劳寿命的极值点分别位于悬挂点附近和触地点附近,对立管疲劳寿命极值点各方向疲劳损伤分布情况进行了分析。所提方法为钢悬链立管疲劳分析提供了新思路,给出的结论对钢悬链立管设计分析有一定借鉴意义。  相似文献   

Enhanced Multi-Layer Fatigue-Analysis Approach for Unbonded Flexible Risers     

杨和振  姜豪  杨启 《海洋工程》2014,28(3):363-379

This paper proposes an enhanced approach for evaluating the fatigue life of each metallic layer of unbonded flexible risers. Owing to the complex structure of unbonded flexible risers and the nonlinearity of the system, particularly in the critical touchdown zone, the traditional method is insufficient for accurately evaluating the fatigue life of these risers. The main challenge lies in the transposition from global to local analyses, which is a key stage for the fatigue analysis of flexible pipes owing to their complex structure. The new enhanced approach derives a multi-layer stress-decomposition method to meet this challenge. In this study, a numerical model validated experimentally is used to demonstrate the accuracy of the stress-decomposition method. And a numerical case is studied to validate the proposed approach. The results demonstrate that the multi-layer stress-decomposition method is accurate, and the fatigue lives of the metallic layers predicted by the enhanced multi-layer analysis approach are rational. The proposed fatigue-analysis approach provides a practical and reasonable method for predicting fatigue life in the design of unbonded flexible risers.  相似文献   

浮式平台横荡运动对水下柔性立管涡激振动的影响     

陈伟民  郑仲钦  郭双喜 《海洋工程》2014,32(3):8-13

由于深水浮式平台的运动幅度较固定式平台增大,其运动与下部立管的动力耦合变得更加明显。研究了上部平台运动对水下立管涡激振动的影响,基于有限元数值模拟,建立了与结构运动耦合的立管尾迹流场的涡激升力、流体阻力模型,进行了"平台运动-立管涡激振动"整体系统的动响应数值模拟,分析了平台横荡运动的幅值、频率等因素对水下立管涡激振动的影响。结果表明,上部平台的振动会在沿着立管展向传播的过程中被放大(称为响应放大);与不考虑平台运动相比,立管的动响应位移增大了多倍,而且振幅放大倍数随着模态阶数的降低而增大;平台横荡振幅越大,立管振动幅值也越大,但是振幅放大倍数的变化不明显。  相似文献   

海洋传感观测服务柔性开发技术研究   总被引：1，自引：0，他引：1  

胡克勇  车兆东  沈飞飞  郭忠文 《中国海洋大学学报(自然科学版)》2014,44(12):115-122

海洋传感观测服务能够实现多个海洋观测系统间的数据共享与集成,支持大范围、多学科的海洋科学研究。在软件开发过程中,由于不同观测系统的数据库异构互异,导致传感器观测服务软件难以复用,开发效率低。本文针对数据库结构的相似性进行分析,提出海洋传感观测服务的柔性开发模型,设计可适配于异构数据库的服务构件。该构件通过配置观测数据在具体数据库的存储结构,实现了数据库结构向服务模式定义的映射;服务构件根据配置信息生成数据库查询语句,实现观测数据的自动提取,避免了数据库异构导致的重复开发的问题。通过将服务构件应用在实际开发中,验证了该模型的有效性与可行性。  相似文献   

血管介入手术中的柔性虚拟力触觉系统研究     

冯安洋  陈笋  陈柏  耿令波  吴洪涛 《南京气象学院学报》2014,6(6):520-524

随着微创手术的发展,虚拟手术的应用前景越来越广阔.力反馈作为虚拟手术的核心技术,其实现的效果直接影响了虚拟手术的沉浸感.通过对经典包围盒碰撞检测算法进行研究比对,选择了球包围盒的碰撞检测算法,并建立了精确的反馈力计算模型,实现了介入血管中的柔性碰撞仿真.该仿真具有很高的实时性和精度.  相似文献   

海上顶部双驱动联动隔水管钻探取心技术          下载免费PDF全文

张会寅  田烈余  林康  郭武  李占钊  杨楠  王世栋 《探矿工程》2022,49(6):110-115

我国南海海域分布着大量礁灰岩地层,这种地层具有原生孔隙大、压缩性强、容易变形、强度小等特点,因此易渗透、易破碎、易坍塌。在岛礁上钻探也常常出现断钻、垮孔、埋钻等事故。对于海洋礁灰岩地层钻探,不仅要克服陆地上面临的问题,还需要面对更为复杂的海洋环境。为解决海上特殊地层取心困难问题,基于船载无隔水管钻探系统,开发了海上顶部双驱动联动隔水管钻探取心技术。该钻探取心技术方案在西沙海域4个不同的站位进行了海洋钻探试验。试验结果表明,该技术可实现高效率、高岩心采取率的海上礁灰岩取心目的,取心深度可达130.75 m,具有广阔的推广前景。  相似文献   

An elastoplastic model based on the shakedown concept for flexible pavements unbound granular materials     

Taha Habiballah  Cyrille Chazallon 《国际地质力学数值与分析法杂志》2005,29(6):577-596

Nowadays, the problem of rutting of flexible pavements linked to permanent deformations occurring in the unbound layers is taken into account only by mechanistic empirical formulas. Finite element modelling of realistic boundary value problems with incremental rheological models will lead to unrealistic calculation time for large cycle numbers. The objective of the authors is to present a simplified model which can be used to model the flexible pavements rutting with the finite elements framework. This method is based on the shakedown theory developed by Zarka which is usually associated to materials like steels. It has been adapted for granular materials by introducing a yield surface taking into account the mean stress influence on the mechanical behaviour and a dependency of the hardening modulus with the stress state. The Drucker–Prager yield surface has been used with a non‐associated flow rule. Comparisons with repeated load triaxial tests carried out on a subgrade soil have been done. These comparisons underline the capabilities of the model to take into account the cyclic behaviour of unbound materials for roads. Finally, a discussion, dealing with the use of the simplified method within a finite element modelling of a full‐scale experiment, is presented. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献