发达国家海上搜救体系对比研究及对我国的启示          下载免费PDF全文

韩鹏  李宇航  揭晓蒙 《海洋技术学报》2020,39(1):107-113

提升海上应急搜救能力对保障人民生命安全、维护国家海洋权益、彰显大国责任和担当具有积极作用和深远意义。发达国家海上搜救体系的先进性主要体现在搜救力量专业化、应急响应快捷化、组织协调高效化、搜救业务程序化等方面。文中对美国、英国、澳大利亚、日本4个国家的海上搜救组织构成、搜救力量水平、搜救工作模式等进行了分析,与我国海上搜救体系和机制进行了对比,并从优化搜救组织模式、完善搜救运行机制、健全搜救力量等方面给出了发展我国海上搜救体系的建议。  相似文献   

Dynamic response of debris flows impacting curved joint check dams     

《国际泥沙研究》2022,37(5):589-600

The dynamic impact force of debris flow on dams with a curved upstream face curved was investigated using laboratory experiments and a theoretical approach. Equations describing the impact force and maximum run-up height were derived. The experiments and theoretical considerations reveal that the impact force and maximum run-up height are mainly controlled by the Froude number (Fr) reduced by the cosine of the channel slope angle (cosα). Both the impact force and the maximum run-up height have a quadratic relation with the modified Froude number (Fr/(cosα)^0.5). The experimental data and the results of the theoretical approach are in good agreement, indicating that the theoretical approach can be used in practical applications. It is concluded that the comparison between the curved-joint dam and the more conventional sharp-joint dam shows no differences in the maximum impact force and run-up height for the same modified Froude number. With the sharp-joint dam, the peak values of the impact force are reached more quickly than with the curved-joint dam.  相似文献   

落石冲击混凝土棚洞力学特性研究     

陈泰江  章广成  向欣 《岩土力学》2022,43(1):277-285

落石冲击棚洞结构作用过程复杂,缺乏统一的落石冲击力表达式。首先,将落石简化为刚性球体,基于Hertz接触理论,推导得到落石冲击力半正弦算法的理论表达式,考虑落石冲击下棚洞的非弹性特征,根据落石与材料碰撞过程中落石加速度曲线特征,采用函数拟合法推导得到落石法向冲击下其冲击力的理论计算方法;然后,基于ANSYS/LS-DYNA软件建立落石冲击棚洞数值计算模型,研究不同冲击速度下落石冲击棚洞动力特征;最后,与现存常见的多种方法进行对比,得出以下结论：Hertz半正弦法得到的落石冲击力远大于函数拟合法和数值法,而函数拟合法和数值法得到的落石冲击力时程曲线相接近,表明函数拟合法更能反映落石与棚洞接触碰撞动力关系;对比其他计算方法可以得到,Hertz算法适用于分析无能量损失下的弹性碰撞问题,而Logistic算法适用于材料大塑性变形的情况,弹塑性接触理论结果和动力有限元结果存在差异,而采用函数拟合推导的计算方法得到的落石最大冲击力和落石冲击作用时间与动力有限元法更接近,更能反映落石冲击棚洞动力响应特征,推导的落石冲击力计算方法可为工程实践中棚洞防护设计提供理论参考。  相似文献   

T型巷道中突出煤−瓦斯两相流动力学试验研究     

许江  程亮  魏仁忠  彭守建  周斌  杨海林 《岩土力学》2022,43(6):1423-1433

为了进一步探究突出煤−瓦斯两相流在不同巷道布置方式下的动力学行为,利用多场耦合煤矿动力灾害大型物理模拟试验系统,开展了T型巷道布置方式下的煤与瓦斯突出试验,得出了两相流运移过程中冲击力与静压的演化特征。结果表明：直线主巷内冲击力随时间呈多峰值震荡衰减趋势,体现了突出过程的脉冲特性,且距突出口越近,冲击力震荡次数越多;分岔两侧支巷内冲击力突出前期呈现两种演化趋势,其一是迅速增大至峰值后缓慢下降,其二是缓慢增大后缓慢下降;距分岔结构中心左侧1 500 mm处出现了较大冲击力值,出现重度危险区域,而右侧则在距500 mm和1 900 mm处。利用突出运移动态图像将整个过程分为单相气流和两相流两个阶段,单相气流阶段中分岔后支巷的冲击力就迅速上升至峰值,而在两相流阶段分岔前主巷的冲击力上升至最高值,存在分岔后冲击力峰值高于分岔前的现象。突出过程中,巷道壁面上静压值总体偏低;静压随时间呈间歇式波动发展,且其峰值点自煤层由近及远呈先增大后减小的趋势;距突出口越远,直线主巷内静压出现峰值的时刻越滞后;分岔支巷内静压左右两侧的演化近似,随着时间推进,分岔结构前后静压衰减逐渐增大。  相似文献   

基于恒速压汞技术研究页岩气储层孔隙结构:以湘西北地区五峰组页岩为例     

王静 《地质与勘探》2021,57(2):450-456

页岩气储层孔隙结构是页岩气富集成藏、储层评价和优选有利区的关键参数,区分孔隙和喉道是表征页岩气储层孔隙结构的关键。本文选择4块具有不同渗透率的湘西北地区奥陶系五峰组页岩为研究对象,基于恒速压汞实验讨论孔隙和喉道的大小、分布特征及其相互关系以及与渗透率的联系。结果表明:具有不同渗透率的页岩样品表现为较为相近的孔径分布特征但差异较大的喉道分布特征。页岩样品渗透率的大小与孔隙半径没有明显相关关系;喉道大小及其分布特征是控制低渗储层孔隙结构的关键要素之一。渗透率较低页岩样品的喉道以喉道半径小且集中分布为特征,而渗透率较大页岩样品的喉道以喉道半径大呈分散分布但主要以大喉道为特征。喉道特征是研究页岩气储层储集空间和吸附能力的重要部分,在以后对页岩气的勘探开发中应特别注意及重视。  相似文献   

ZDY12000LD型履带液压钻机机身立柱断裂分析          下载免费PDF全文

李骏  焉忠方  路前海 《探矿工程》2021,48(S1):339-342

钻机立柱是煤矿井下设备工作重要的承载部件,其性能直接影响整车工作的安全性和可靠性。通过建立立柱三维模型,对ZDY12000LD型定向钻机立柱的有限元分析,在最大起拔力下对立柱进行强度校核。将原立柱材料Q345钢改为Q550钢,显著提高了立柱的力学性能,立柱可承受的弯曲应力提高了43%,变形量减小4%,承载能力和安全可靠性显著提高,增强了钻机运行的稳定性、安全性和可靠性。  相似文献   

Modelling of the passive turning of a turret moored vessel in conditions of compact ice     

《Applied Ocean Research》2019

The concept of the offshore oil and gas field development using floating ship-shaped platforms, frequently named floating production units (FPU further), with turret mooring is widely used in the world, including regions with harsh environment. The direct transfer of this concept to the Arctic seas is not possible, mostly due to the difficulties of maintaining a weathervaning, or passive turning regime in heavy ice conditions. The main danger relates to the fact that the expected FPU rotation under the action of high ice loads can be accompanied by a translational displacement of the FPU away from the mooring point. As a result, the mooring system may reach an overloaded state until the FPU turns to a favourable position relative to the ice drift direction. In the paper, we are focused on the investigation of a mathematical model of the passive FPU turning on a spot under the assumption that the ice cover is described by a rigid-plastic continuum. The study is performed both analytically and by numerical simulations. A number of specific FPU motion patterns are analytically derived from the model in quasi-static approximation in the form of successive limit states of the system FPU – ice continuum. Some results of the corresponding numerical simulation are presented that confirm the existence of similar solutions in the full dynamic setting of the problem. A partial parametric analysis of the problem is also performed.  相似文献   

岩石膨胀性试验注意事项探讨     

刘军  谷莉  郭程  卓慧英 《岩土工程技术》2020,(2):117-121

从室内试验的角度来探讨几类工程勘察中岩石常用膨胀性试验(自由膨胀率、膨胀力、侧向约束膨胀率、耐崩解)的注意事项,从野外取样、标准样品制取、试验操作、方法选择等方面进行了论述,力求减小试验误差,提高膨胀岩的试验水平,保证试验结果的准确性,并使膨胀岩膨胀性指标的测定方法更臻完善。  相似文献   

Moving load response of an axially loaded Timoshenko beam on a multilayered transversely isotropic half-space comprising different media     

Yi-Cheng Li  Shi-Jin Feng  Zhang-Long Chen 《国际地质力学数值与分析法杂志》2020,44(18):2501-2523

This paper investigates the dynamic response of an axially loaded Timoshenko beam coupled with a multilayered transversely isotropic (TI) half-space subjected to a moving load. An axial force induced by the thermal expansion is taken into account in the Timoshenko beam. The half-space considers the alternate distribution of an arbitrary number of TI elastic and poroelastic layers to model foundation soils with different properties and moisture conditions. To solve the governing equations, Fourier transform is adopted. The stratified foundation is formulated by extending an “adapted stiffness matrix method” to a more general scenario with an arbitrary number of layers. The beam is then coupled with the foundation to derive solutions to the system in the frequency-wavenumber domain. The final results in the time-spatial domain are recovered by the inverse Fourier transform. After confirming the accuracy of the method in this study, the influences of the pore water existence, the transverse isotropy of different parameters, and the axial force are investigated. It can be observed that the effect of pore water existence on the maximum beam deflection can reach 22% in this study. The transverse isotropy of the elastic and shear moduli influences the critical speed of the beam deflection by altering the phase velocity of the first wave propagation mode of the beam-foundation system. The vertical permeability coefficient is more important than the horizontal one in determining the excess pore pressure. The rise of the beam temperature (axial force) decreases the critical speed and magnifies the vibrations.  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献