A model integrating geo-information and self-organizing map (SOM) for exploring the database of soil environmental surveys was established. The dataset of 5 heavy metals (As, Cd, Cr, Hg, and Pb) was built by the regular grid sampling in Hechi, Guangxi Zhuang Autonomous Region in southern China. Auxiliary datasets were collected throughout the study area to help interpret the potential causes of pollution. The main findings are as follows: (1) Soil samples of 5 elements exhibited strong variation and high skewness. High pollution risk existed in the case study area, especially Hg and Cd. (2) As and Pb had a similar topo-logical distribution pattern, meaning they behaved similarly in the soil environment. Cr had behaviours in soil different from those of the other 4 elements. (3) From the U-matrix of SOM networks, 3 levels of SEQ were identified, and 11 high risk areas of soil heavy metal-contaminated were found throughout the study area, which were basically near rivers, factories, and ore zones. (4) The variations of contamination index (CI) followed the trend of construction land (1.353) > forestland (1.267) > cropland (1.175) > grassland (1.056), which suggest that decision makers should focus more on the problem of soil pollution surrounding industrial and mining enterprises and farmland.
This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results. 相似文献
A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 104 cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0. 相似文献
AbstractWith the growing demand for underwater refill engineering, the construction technology of implementing fluidized solidification in underwater pouring has recently received increased attention. However, the environmental impact of underwater casting on surrounding water bodies, especially when the silt is polluted, is still unclear. In this study, a simulated underwater pouring test and a static immersion release test were conducted separately to study the quality of the surrounding water during and after pouring. The results showed that fluidized-solidified silt casting could increase the pH of the surrounding water, even after the pouring had stopped, by approximately 1.0 and the turbidity could reach 200 NTU. No diffusion of Zn and Cu into the surrounding water was observed and while Ni and Cr exhibited slight diffusion, this was at a level well below international water quality standard. During construction, reducing the distance from the seafloor to the bottom of the pouring catheter could reduce the level of pollution. After construction, the use of neutral solidified materials can effectively reduce the pH of the surrounding water and the potential risk of heavy metal dissolution. 相似文献
Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil. 相似文献