Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

Storm-induced turbidity currents on a sediment-starved shelf: Insight from direct monitoring and repeat seabed mapping of upslope migrating bedforms     

Alexandre Normandeau  Daniel Bourgault  Urs Neumeier  Patrick Lajeunesse  Guillaume St-Onge  Louis Gostiaux  Cédric Chavanne 《Sedimentology》2020,67(2):1045-1068

The monitoring of turbidity currents enables accurate internal structure and timing of these flows to be understood. Without monitoring, triggers of turbidity currents often remain hypothetical and are inferred from sedimentary structures of deposits and their age. In this study, the bottom currents within 20 m of the seabed in one of the Pointe-des-Monts (Gulf of St. Lawrence, eastern Canada) submarine canyons were monitored for two consecutive years using Acoustic Doppler Current Profilers. In addition, multibeam bathymetric surveys were carried out during deployment of the Acoustic Doppler Current Profilers and recovery operations. These new surveys, along with previous multibeam surveys carried out over the last decade, revealed that crescentic bedforms have migrated upslope by about 20 to 40 m since 2007, despite the limited supply of sediment on the shelf or river inflow in the region. During the winter of 2017, two turbidity currents with velocities reaching 0·5 m sec⁻¹ and 2·0 m sec⁻¹, respectively, were recorded and were responsible for the rapid (<1 min) upstream migration of crescentic bedforms measured between the autumn surveys of 2016 and 2017. The 200 kg (in water) mooring was also displaced 10 m down-canyon, up the stoss side of a bedform, suggesting that a dense basal layer could be driving the flow during the first minute of the event. Two other weaker turbidity currents with speeds <0·5 m sec⁻¹ occurred, but did not lead to any significant change on the seabed. These four turbidity currents coincided with strong and sustained wind speed >60 km h⁻¹ and higher than normal wave heights. Repeat seabed mapping suggests that the turbidity currents cannot be attributed to a canyon-wall slope failure. Rather, sustained windstorms triggered turbidity currents either by remobilizing limited volumes of sediment on the shelf or by resuspending sediment in the canyon head. Turbidity currents can thus be triggered when the sediment volume available is limited, likely by eroding and incorporating canyon thalweg sediment in the flow, thereby igniting the flow. This process appears to be particularly important for the generation of turbidity currents capable of eroding the lee side of upslope migrating bedforms in sediment-starved environments and might have wider implications for the activity of submarine canyons worldwide. In addition, this study suggests that a large external trigger (in this case storms) is required to initiate turbidity currents in sediment-starved environments, which contrasts with supply-dominated environments where turbidity currents are sometimes recorded without a clear triggering mechanism.  相似文献   

海底地震动作用下近海桥梁地震响应研究          下载免费PDF全文

王德斌  刘驭  张蓬勃  陈宝魁  李敏  张皓 《世界地震工程》2019,35(3):063-72

以某近海大桥引桥段连续梁桥为工程背景，建立考虑海底地震动特性和腐蚀效应的近海桥梁地震反应分析模型。采用增量动力分析方法分析腐蚀效应以及海底地震动作用对近海桥梁地震响应的影响。研究结果表明:腐蚀效应与海底地震动作用都会不同程度影响近海桥梁结构的抗震性能。其中:腐蚀效应会增大近海桥梁的破坏指标，降低最大墩底剪力和弯矩值，从而降低桥梁的抗震性能；海底地震动作用会增大近海桥梁的破坏指标及最大墩底剪力、弯矩值；在2种因素耦合作用下，桥梁的抗震性能将会进一步降低。  相似文献   

波浪作用下单桩基础周围海床液化机制研究   总被引：1，自引：1，他引：0  

隋倜倜  张弛  高玉峰  郑金海 《海洋工程》2018,36(4):88-96

建立波浪作用下单桩周围三维海床动力响应模型,考虑自重影响下的海床长时间固结过程。采用已有物理模型试验数据对模型进行验证,证实其具有较好的适用性。模拟波浪作用下单桩周围三维海床液化区域,通过定量分析超孔隙水压力和土体初始有效应力的变化,讨论单桩插入深度对海床液化的影响机制。研究表明,单桩插入深度发生变化时,土体初始有效应力对海床液化的影响要大于超孔隙水压力,且影响程度随着插入深度的增加而逐渐增大。  相似文献   

Modeling deepwater seabed steady-state thermal fields around buried pipeline including trenching and backfill effects     

《Computers and Geotechnics》2014

Deepwater pipelines are designed to transport mixtures of oil and gas, and their associated impurities at wellhead temperatures that can be in excess of 149 °C (∼300 °F or 422 K) while the external temperature maybe in the range of 5 °C (∼41 °F or 278 K). Depending on the circumstances these pipelines may be buried for physical protection or for additional thermal insulation using robotic trenching equipment. This results in a complex cut and backfill geometry in the seafloor in addition to altering the thermal properties of the backfill. A two-dimensional boundary element model was developed specifically to address to investigate the local steady-state thermal field in the near field of the pipeline. The model allows one to account for the complex geometries in the near field associated with this burial technique, site-specific multi-layered soil conditions and the seawater adjacent to the seafloor. A parametric study was preformed to evaluate effects of the thermal power loss, burial depth, pipe diameter and soil thermal conductivity on the thermal field in the near field of a buried pipeline. The numerical examples illustrate the influence of the backfill thermal property on the temperature at the pipe wall, that the pipe diameter controls the required output thermal power needed to maintain the desired pipe wall temperature, and the importance of pipeline burial depth on seabed temperature distribution above the pipeline.  相似文献   

“数字海底”--海底数据集成管理与可视化研究     

肖鹏  王悦东  李安龙 《海洋信息》2020,35(1):40-45,51

针对目前"数字海底"建设中存在海底调查数据集成管理与三维可视化表达不足等问题,本文采用GIS技术,以黄河水下三角洲埕北海域为研究对象,利用地理空间数据集成理论与三维建模方法,建立了埕北海域三维海底空间数据库,实现了研究区域地形数据、地层数据、钻孔数据、表层沉积物数据的有效组织管理与可视化,并在此基础上,采用ArcGIS Engine 10.0,结合.NET平台,在Visual Studio 2010开发环境下,利用C#语言进行了二次开发,实现了基于C/S (Client/Server)架构的三维海底虚拟仿真系统的开发,设计了一套面向埕北海域的三维海底虚拟仿真原型系统。  相似文献   

甘肃省肃南县桦树沟铁铜矿床地质特征及成矿模式     

李生全 《地质与勘探》2018,54(S1):1383-1391

甘肃北祁连西段桦树沟铁铜矿床是西北地区一个非常重要的铁铜矿床,对其地质特征及成矿模式的研究,将会对研究该成矿带铁铜矿床的成矿模式具有深远意义。通过大量的工作,认为桦树沟铁铜矿床为产于长城系上岩组的一套陆源碎屑岩夹碳酸沉积建造的同生海底喷流沉积矿床。铁矿体控矿构造主要是区域褶皱带,主要赋存于长城系上岩组的含铁细碎屑—粘土岩建造中,具体岩性为千枚岩。铜矿体的产出明显受后期韧性剪切带和层间滑动带共同控制,主要矿石类型有含铁碧玉岩型和蚀变千枚岩型两种。  相似文献   

基于剖面声呐的海底微地貌观测研究^*          下载免费PDF全文

田壮才  彭子奇  贾永刚  张明伟 《古地理学报》2022,24(1):180-190

海底地貌是海水覆盖下的固体地球表面形态的总称。海底地貌巨变往往与海底地质灾害息息相关,会对海底管线和海上平台等海洋工程设施造成危害,因而对海底地貌进行原位观测具有重要意义。本研究基于前人研究成果和团队常年自主研发仪器经验,研制出了剖面声呐海底微地貌原位观测系统,详细介绍了观测系统的组成、功能、工作原理和工作模式,并提出了观测数据的处理分析方法;然后,使用观测系统进行了标志物检验实验,通过将观测系统测量数据与其他设备测量数据相对比,验证了观测系统的可行性和数据准确性;最后,使用观测系统在舟山海域朱家尖滑坡区进行原位观测,进一步验证了观测系统的可行性。观测结果进一步表明剖面声呐观测系统可以用于海底微地貌的观测研究。  相似文献   

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation          下载免费PDF全文

R. He  R.Y.S. Pak  L.Z. Wang 《国际地质力学数值与分析法杂志》2017,41(4):508-526

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Current-induced scour beneath initially elevated subsea pipelines     

《Applied Ocean Research》2019

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.  相似文献