Characterizing spatial and temporal variation in 18O and 2H content of New Zealand river water for better understanding of hydrologic processes     

Jing Yang  Bruce D. Dudley  Kelsey Montgomery  Will Hodgetts 《水文研究》2020,34(26):5474-5488

Time series of hydrogen and oxygen stable isotope ratios (δ²H and δ¹⁸O) in rivers can be used to quantify groundwater contributions to streamflow, and timescales of catchment storage. However, these isotope hydrology techniques rely on distinct spatial or temporal patterns of δ²H and δ¹⁸O within the hydrologic cycle. In New Zealand, lack of understanding of spatial and temporal patterns of δ²H and δ¹⁸O of river water hinders development of regional and national-scale hydrological models. We measured δ²H and δ¹⁸O monthly, together with river flow rates at 58 locations across New Zealand over a two-year period. Results show: (a) general patterns of decreasing δ²H and δ¹⁸O with increasing latitude were altered by New Zealand's major mountain ranges; δ²H and δ¹⁸O were distinctly lower in rivers fed from higher elevation catchments, and in eastern rain-shadow areas of both islands; (b) river water δ²H and δ¹⁸O values were partly controlled by local catchment characteristics (catchment slope, PET, catchment elevation, and upstream lake area) that influence evaporation processes; (c) regional differences in evaporation caused the slope of the river water line (i.e., the relationship between δ²H and δ¹⁸O in river water) for the (warmer) North Island to be lower than that of the (cooler, mountain-dominated) South Island; (d) δ²H seasonal offsets (i.e., the difference between seasonal peak and mean values) for individual sites ranged from 0.50‰ to 5.07‰. Peak values of δ¹⁸O and δ²H were in late summer, but values peaked 1 month later at the South Island sites, likely due to greater snow-melt contributions to streamflow. Strong spatial differences in river water δ²H and δ¹⁸O caused by orographic rainfall effects and evaporation may inform studies of water mixing across landscapes. Generally distinct seasonal isotope cycles, despite the large catchment sizes of rivers studied, are encouraging for transit time analysis applications.  相似文献   

毛乌素沙地锦鸡儿（Caragana）根系微域细菌群落多样性特征     

周子渊  于明含  丁国栋  高广磊  何莹莹 《中国沙漠》2020,40(4):128-137

基于16S rRNA高通量基因测序技术，对毛乌素沙地小叶锦鸡儿（Caragana microphylla)、柠条锦鸡儿（Caragana korshinskii）根系微域（即根系、根际土、根区土、灌丛间空白土）间的细菌群落多样性和结构差异性进行表征。本研究对各根系微域间细菌群落的Alpha多样性指数进行了单因素方差分析以及基于OTU水平的PCA分析，探究其在根系微域间Alpha和Beta多样性的层级变化，证实了有关植物根系微域生态位分化的报道，并发现锦鸡儿属植物根系微域间细菌群落的多样性和结构组成随着4个微域类型由外及内呈现出显著的层级差异性（P<0.05）。通过对优势细菌群组的结构组成分析，发现锦鸡儿属植物对特定细菌群组具有显著的向根系内筛选富集的作用（P<0.05）。这种植物通过根系微域对特定细菌群组的逐级筛选富集作用，是导致锦鸡儿属植物灌丛下不同生态位间细菌群落结构和组成发生层级变异的主要原因。  相似文献   

Salinivibrio sp.YH4胞外丝氨酸蛋白酶EYHS耐盐性及生物信息学分析          下载免费PDF全文

武翠玲  宋英达  高慧芳  张廉芸  任晨霞 《盐湖研究》2020,28(1)

摘要：目的 探讨菌株Salinivibrio sp.YH4分泌的丝氨酸蛋白酶EYHS的耐盐性及结构特征。方法 明胶底物酶谱法分析EYHS的耐盐性。应用生物信息学手段对EYHS及6种耐盐的S8家族丝氨酸蛋白酶结构特征进行分析。结果 EYHS在4 mol/L的NaCl溶液中仍具有活性，属于耐盐蛋白酶。EYHS及6种S8家族丝氨酸蛋白酶分子表面的loop区等无规则卷曲所占比例较高，α-螺旋与β-片层则主要位于酶分子内部。EYHS分子表面酸性氨基酸含量较高，且具有弱疏水内核。多序列比对发现蛋白酶的催化三联体两侧存在高度保守的基序和保守的极性氨基酸及芳香族氨基酸，并存在多个保守的Gly与Ala。同源模建和表面电荷分布显示，α螺旋和β片层围成了蛋白酶的催化腔，EYHS活性中心包含由Asp32、His65与Ser215组成的催化三联体，且催化位点区域表面静电势为负。结论 上述结构特征可能有助于耐盐丝氨酸蛋白酶EYHS在高盐环境下维持其稳定性和适度柔性，并有助于其催化功能的发挥，为深入研究耐盐丝氨酸蛋白酶的高盐环境适应性提供了一定的理论依据。  相似文献   

Analysis of city centrality based on entropy weight TOPSIS and population mobility:A case study of cities in the Yangtze River Economic Belt     

罗静  陈四云  孙璇  朱媛媛  曾菊新  陈广平 《地理学报(英文版)》2020,30(4):515-534

Based on statistical data and population flow data for 2016,and using entropy weight TOPSIS and the obstacle degree model,the centrality of cities in the Yangtze River Economic Belt(YREB)together with the factors influencing centrality were measured.In addition,data for the population flow were used to analyze the relationships between cities and to verify centrality.The results showed that:(1)The pattern of centrality conforms closely to the pole-axis theory and the central geography theory.Two axes,corresponding to the Yangtze River and the Shanghai-Kunming railway line,interconnect cities of different classes.On the whole,the downstream cities have higher centrality,well-defined gradients and better development of city infrastructure compared with cities in the middle and upper reaches.(2)The economic scale and size of the population play a fundamental role in the centrality of cities,and other factors reflect differences due to different city classes.For most of the coastal cities or the capital cities in the central and western regions,factors that require long-term development such as industrial facilities,consumption,research and education provide the main competitive advantages.For cities that are lagging behind in development,transportation facilities,construction of infrastructure and fixed asset investment have become the main methods to achieve development and enhance competitiveness.(3)The mobility of city populations has a significant correlation with the centrality score,the correlation coefficients for the relationships between population mobility and centrality are all greater than 0.86(P<0.01).The population flow is mainly between high-class cities,or high-class and low-class cities,reflecting the high centrality and huge radiating effects of high-class cities.Furthermore,the cities in the YREB are closely linked to Guangdong and Beijing,reflecting the dominant economic status of Guangdong with its geographical proximity to the YREB and Beijing's enormous influence as the national political and cultural center,respectively.  相似文献   

Identifying primary public transit corridors using multi-source big transit data     

Tong Zhang  Yicong Li  Hui Yang  Chenrong Cui  Jing Li  Qinghua Qiao 《International journal of geographical information science》2020,34(6):1137-1161

ABSTRACT

Effective public transit planning needs to address realistic travel demands, which can be illustrated by corridors across major residential areas and activity centers. It is vital to identify public transit corridors that contain the most significant transit travel demand patterns. We propose a two-stage approach to discover primary public transit corridors at high spatio-temporal resolutions using massive real-world smart card and bus trajectory data, which manifest rich transit demand patterns over space and time. The first stage was to reconstruct chained trips for individual passengers using multi-source massive public transit data. In the second stage, a shared-flow clustering algorithm was developed to identify public transit corridors based on reconstructed individual transit trips. The proposed approach was evaluated using transit data collected in Shenzhen, China. Experimental results demonstrated that the proposed approach is a practical tool for extracting time-varying corridors for many potential applications, such as transit planning and management.  相似文献   

A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

Coupling numerical simulation with remotely sensed information for the study of frozen soil dynamics     

HuiRan Gao  WanChang Zhang 《寒旱区科学》2020,12(6):404-417

The acquisition of spatial-temporal information of frozen soil is fundamental for the study of frozen soil dynamics and its feedback to climate change in cold regions. With advancement of remote sensing and better understanding of frozen soil dynamics, discrimination of freeze and thaw status of surface soil based on passive microwave remote sensing and numerical simulation of frozen soil processes under water and heat transfer principles provides valuable means for regional and global frozen soil dynamic monitoring and systematic spatial-temporal responses to global change. However, as an important data source of frozen soil processes, remotely sensed information has not yet been fully utilized in the numerical simulation of frozen soil processes. Although great progress has been made in remote sensing and frozen soil physics, yet few frozen soil research has been done on the application of remotely sensed information in association with the numerical model for frozen soil process studies. In the present study, a distributed numerical model for frozen soil dynamic studies based on coupled water-heat transferring theory in association with remotely sensed frozen soil datasets was developed. In order to reduce the uncertainty of the simulation, the remotely sensed frozen soil information was used to monitor and modify relevant parameters in the process of model simulation. The remotely sensed information and numerically simulated spatial-temporal frozen soil processes were validated by in-situ field observations in cold regions near the town of Naqu on the East-Central Tibetan Plateau. The results suggest that the overall accuracy of the algorithm for discriminating freeze and thaw status of surface soil based on passive microwave remote sensing was more than 95%. These results provided an accurate initial freeze and thaw status of surface soil for coupling and calibrating the numerical model of this study. The numerically simulated frozen soil processes demonstrated good performance of the distributed numerical model based on the coupled water-heat transferring theory. The relatively larger uncertainties of the numerical model were found in alternating periods between freezing and thawing of surface soil. The average accuracy increased by about 5% after integrating remotely sensed information on the surface soil. The simulation accuracy was significantly improved, especially in transition periods between freezing and thawing of the surface soil.  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献