A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces     

Taotao Zhang  Yang Xiao  Dongfang Liang  Hongwu Tang  Junzeng Xu  Saiyu Yuan  Nairu Wang  Bin Luan 《水文研究》2021,35(5):e14152

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.  相似文献   

基于细分行业的安徽省创新型企业集聚研究     

白如山  胡森林  庄良  刘岩  刘恺恺  黄鹏娜 《世界地理研究》2020,29(6):1190-1201

创新型企业作为塑造创新地理格局的重要力量，其区位选择的外部特征及内在机理亟须予以系统化研究。基于对安徽省创新型企业的细分行业与空间建库，采用核密度估计和地理探测器等方法，对细分行业下的创新型企业空间集聚特征及影响因素进行研究。结果表明：（1）安徽省创新型企业类型以先进制造和自动化为主，并以生物与新医药、新材料、电子信息为辅；（2）创新型企业空间集聚的不均衡特征显著，呈现出“一核一带多节点”的集聚分布特征，且合肥、芜湖是两个重要集聚区；不同细分行业视角下创新型企业的空间分布形态各异，可归纳为点-轴式、极核式、双核式及多核分散式等4种空间组织形态。（3）创新型因子对于创新型企业的空间集聚最为重要，但传统型和政策型因子的重要性仍不容忽视。其中，产业基础、人力资本、创新投入是最核心的因素，但各行业创新型企业的影响因素作用力则表现出一定的异质性。  相似文献   

Sampling Methane-Bearing Coal Seams by Freezing Method: Coalbed Methane Desorption and Inhibition Characteristics Under Freezing Temperature     

Wang  Fakai  Luo  Yongjiang  Liang  Yunpei  Peng  Jianming  Li  Baijun 《Natural Resources Research》2020,29(2):1351-1360

Methane content in coal seam is an essential parameter for the assessment of coalbed gas reserves and is a threat to underground coal mining activities. Compared with the adsorption-isotherm-based indirect method, the direct method by sampling methane-bearing coal seams is apparently more accurate for predicting coalbed methane content. However, the traditional sampling method by using an opened sample tube or collecting drill cuttings with air drilling operation would lead to serious loss of coalbed methane in the sampling process. The pressurized sampling method by employing mechanical-valve-based pressure corer is expected to reduce the loss of coalbed methane, whereas it usually results in failure due to the wear of the mechanical valve. Sampling of methane-bearing coal seams by freezing was proposed in this study, and the coalbed gas desorption characteristics under freezing temperature were studied to verify the feasibility of this method. Results show that low temperature does not only improve the adsorption velocity of the coalbed gas, but also extend the adsorption process and increase the total adsorbed gas. The total adsorbed methane gas increased linearly with decreasing temperature, which was considered to be attributed to the decreased Gibbs free energy and molecular average free path of the coalbed gas molecular caused by low temperature. In contrast, the desorption velocity and total desorbed gas are significantly deceased under lower temperatures. The process of desorption can be divided into three phases. Desorption velocity decreases linearly at the first phase, and then, it shows a slow decreases at the second phase. Finally, the velocity of desorption levels off to a constant value at the third phase. The desorbed coalbed gas shows a parabolic relation to temperature at each phase, and it increases with increasing temperature at the first phase, and then, it poses a declining trend with increasing temperature at the rest phases. The experimental results show that decreasing the system temperature can restrain desorption of coalbed methane effectively, and it is proven to be a feasible way of sampling methane-bearing coal seams.

  相似文献   

Geological Control of Fold Structure on Gas Occurrence and Its Implication for Coalbed Gas Outburst: Case Study in the Qinan Coal Mine,Huaibei Coalfield,China     

Zhang  Kaizhong  Wang  Liang  Cheng  Yuanping  Li  Wei  Kan  Jin  Tu  Qingyi  Jiang  Jingyu 《Natural Resources Research》2020,29(2):1375-1395

  相似文献   

Characterization and Quantification of Mining-Induced Fractures in Overlying Strata: Implications for Coalbed Methane Drainage     

Zhang  Bichuan  Sun  Haitao  Liang  Yunpei  Wang  Kequan  Zou  Quanle 《Natural Resources Research》2020,29(4):2467-2480

Natural Resources Research - Coalbed methane (CBM) production in the overlying strata of coal reservoirs is often hampered by the unknown distribution of the mining-induced fractures....  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献