Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest     

Haixia Zhang  Congsheng Fu  Aimin Liao  Can Zhang  Jiufu Liu  Niu Wang  Bin He 《水文研究》2021,35(3):e14091

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.  相似文献   

广西土壤有机质空间变异特征及其影响因素研究   总被引：2，自引：0，他引：2  

钟聪  李小洁  何园燕  邱微文  李杰  张新英  胡宝清 《地理科学》2020,40(3):478-485

基于广西第二次土壤普查的270个土壤剖面资料,结合1∶50万数字化土壤类型图、土地利用类型图和气象监测数据等资料,利用地统计学和逐步回归分析等方法对广西表层土壤有机质空间变异特征及其影响因素进行了探究。结果表明：广西表层土壤有机质平均含量为3.11±2.19%,变异系数为70.72%,空间分布呈北高南低的趋势。广西表层土壤有机质空间分布受到自然和人为因素的共同影响,土壤类型、成土母质、海拔、土地利用、气候和坡度6个环境因子对全区土壤有机质含量变异的综合解释能力为47.9%。其中,土壤类型是最重要的影响因素,能独立解释其变异的36.0%,海拔和成土母质分别能独立解释28.5%和15.8%。气温对广西土壤有机质空间分布的影响比降水量更加显著,从而造成了广西土壤有机质整体呈南低北高的趋势。同时,土壤有机质对气温的敏感性在一定程度上受到降雨量的制约。此外,研究区农业耕作管理等因素对土壤有机质的影响也不容忽视。  相似文献   

毛乌素沙地锦鸡儿（Caragana）根系微域细菌群落多样性特征     

周子渊  于明含  丁国栋  高广磊  何莹莹 《中国沙漠》2020,40(4):128-137

基于16S rRNA高通量基因测序技术，对毛乌素沙地小叶锦鸡儿（Caragana microphylla)、柠条锦鸡儿（Caragana korshinskii）根系微域（即根系、根际土、根区土、灌丛间空白土）间的细菌群落多样性和结构差异性进行表征。本研究对各根系微域间细菌群落的Alpha多样性指数进行了单因素方差分析以及基于OTU水平的PCA分析，探究其在根系微域间Alpha和Beta多样性的层级变化，证实了有关植物根系微域生态位分化的报道，并发现锦鸡儿属植物根系微域间细菌群落的多样性和结构组成随着4个微域类型由外及内呈现出显著的层级差异性（P<0.05）。通过对优势细菌群组的结构组成分析，发现锦鸡儿属植物对特定细菌群组具有显著的向根系内筛选富集的作用（P<0.05）。这种植物通过根系微域对特定细菌群组的逐级筛选富集作用，是导致锦鸡儿属植物灌丛下不同生态位间细菌群落结构和组成发生层级变异的主要原因。  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献   

Deriving fragility functions from bilinearized capacity curves for earthquake scenario modelling using the conditional spectrum     

Clotaire Michel  Helen Crowley  Pia Hannewald  Pierino Lestuzzi  Donat Fäh 《Bulletin of Earthquake Engineering》2018,16(10):4639-4660

The development of fragility curves to perform seismic scenario-based risk assessment requires a fully probabilistic procedure in order to account for uncertainties at each step of the computation. This is especially true when developing fragility curves conditional on an Intensity Measure that is directly available from a ground-motion prediction equation. In this study, we propose a new derivation method that uses realistic spectra instead of design spectral shapes or uniform hazard spectra and allows one to easily account for the features of the site-specific hazard that influences the fragility, without using non-linear dynamic analysis. The proposed method has been applied to typical school building types in the city of Basel (Switzerland) and the results have been compared to the standard practice in Europe. The results confirm that fragility curves are scenario dependent and are particularly sensitive to the magnitude of the earthquake scenario. The same background theory used for the derivation of the fragility curves has allowed an innovative method to be proposed for the conversion of fragility curves to a common IM (i.e. spectral acceleration or PGA). This conversion is the only way direct comparisons of fragility curves can be made and is useful when inter-period correlation cannot be used in scenario loss assessment. Moreover, such conversion is necessary to compare and verify newly developed curves against those from previous studies. Conversion to macroseismic intensity is also relevant for the comparison between mechanical-based and empirical fragility curves, in order to detect possible biases.  相似文献