Nonlinear coupled dynamic response of offshore Spar platforms under regular sea waves     

A. K. Agarwal  A. K. Jain 《Ocean Engineering》2003,30(4):492-551

Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom.  相似文献   

钢支撑性能对高层钢结构动力反应的影响   总被引：1，自引：0，他引：1  

邓雪松  张耀春 《地震工程与工程振动》1997,17(3):52-59

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。  相似文献   

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献   

A finite differences formulation for the linear and nonlinear dynamics of 2D catenary risers   总被引：1，自引：0，他引：1  

Ioannis K. Chatjigeorgiou   《Ocean Engineering》2008,35(7):616-636

A finite differences (FD) solution method is proposed for the numerical treatment of the dynamic equilibrium problem of 2D catenary risers. The method is based on the so-called Box approximation, which in the scope of the present contribution is applied to the complete nonlinear model as well as to the reduced linearized formulation. The application of the Box method transforms the original governing systems into convenient sets of algebraic equations, which in turn are solved efficiently by the relaxation method. Extensive numerical calculations are presented that describe the dynamic behaviour of the structure and evaluate the amplification in loading due to the dynamic components. The effect of the geometric nonlinearities is assessed through comparative calculations that concern both mathematical formulations examined in the present, i.e. the complete nonlinear, and the reduced linearized model. Special attention is paid to the heave excitations as they amplify significantly the magnitudes of the loading components.  相似文献   

复杂载荷作用下立管触地段损伤管道的动力响应     

代云云  周晶  李志刚 《中国海洋大学学报(自然科学版)》2020,(1):145-153

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。  相似文献   

国外深水钢悬链线立管研究发展现状   总被引：2，自引：0，他引：2  

黄维平  白兴兰  李华军 《中国海洋大学学报(自然科学版)》2009,39(2)

介绍国外在新型深水立管系统--钢悬链线立管关键技术方面的研究发展现状,论述浮体一、二阶运动对钢悬链线立管疲劳寿命的影响、浮体升沉运动对钢悬链线立管触地点疲劳寿命的影响;钢悬链线立管与海底相互作用机制的实验研究及结果;钢悬链线立管涡致振动与疲劳的研究现状.并简要论述钢悬链线立管触地点问题的研究结论.  相似文献   

钢梁阻尼器的最佳延性率及其控制     

陆顺永 《地震工程与工程振动》1995,15(4):85-92

基于双线性和三线性的力－位移滞回线假设，导出了钢梁阻尼器隔震系统等效阻尼比与阻尼器延性率的关系；为了获得大阻尼比隔震系统，以尽量减小隔震系统的地震反应，求得了使系统阻尼比为最大的阻尼器相应延性率（即最佳延性率）所需满足的条件；给出了在给定地震地面运动输入条件下，使系统阻尼器变形位移达到最佳延性率的阻尼器初始刚度和屈服位移的确定方法。  相似文献   

深水钻井隔水管紧急脱离后的反冲响应   总被引：1，自引：0，他引：1  

李朝玮  樊洪海  汪志明  沈维格  王义顷 《海洋工程》2015,33(4):121-127

深水钻井中,在恶劣海况或浮式平台定位失效等情况下,需紧急断开隔水管与水下防喷器的连接。隔水管突然脱离后会加速向上反冲,如果反冲作用控制不当,可能威胁钻井平台、隔水管体和水下井口的安全。介绍了国外隔水管紧急脱离与反冲响应的研究情况,分析了隔水管紧急脱离的原因与程序、脱离后的反冲过程、反冲控制方式和成功脱离标准、反冲响应的分析方法。建议:由于南海深水海况复杂,作业者需制定紧急脱离的预案和作业规程,并进行紧急脱离操作培训;由于隔水管紧急脱离后的反冲响应涉及多个非线性瞬态过程,研究者应该开展隔水管紧急脱离测试和反冲响应模拟计算,开发隔水管反冲响应分析软件。  相似文献   

深水钢悬链立管疲劳寿命评估分析     

董永强  宋儒鑫  孙丽萍 《海洋工程》2014,32(2):119-124

在时域内分析深水钢悬链立管在平台运动和波流载荷共同作用下的非线性动力响应;采用雨流计数法处理立管节点应力的时间历程,选用DoE.E型S-N曲线分析立管在单一海况和平台运动联合作用下的疲劳损伤;将各方向含概率分布的疲劳损伤进行叠加,得到立管整体的全方向疲劳损伤及疲劳寿命。平台的运动为六自由度的运动预报数据,波流载荷由某海域实际的波浪统计数据采用Morison公式计算所得。计算结果表明钢悬链立管疲劳寿命的极值点分别位于悬挂点附近和触地点附近,对立管疲劳寿命极值点各方向疲劳损伤分布情况进行了分析。所提方法为钢悬链立管疲劳分析提供了新思路,给出的结论对钢悬链立管设计分析有一定借鉴意义。  相似文献   

Damage localization of marine risers using time series of vibration signals     

Hao Liu  Hezhen Yang  Fushun Liu 《中国海洋大学学报(英文版)》2014,13(5):777-781

Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil community. For example, significant increase in structure mass due to marine plant/animal growth and changes in modal properties by equipment noise are not the result of damage for riser structures. In an attempt to eliminate the need to determine modal parameters, a data-based method is developed. The implementation of the method requires that vibration data are first standardized to remove the influence of different loading conditions and the autoregressive moving average (ARMA) model is used to fit vibration response signals. In addition, a damage feature factor is introduced based on the autoregressive (AR) parameters. After that, the Euclidean distance between ARMA models is subtracted as a damage indicator for damage detection and localization and a top tensioned riser simulation model with different damage scenarios is analyzed using the proposed method with dynamic acceleration responses of a marine riser as sensor data. Finally, the influence of measured noise is analyzed. According to the damage localization results, the proposed method provides accurate damage locations of risers and is robust to overcome noise effect.  相似文献