Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献   

钢管脐带缆扭转平衡设计     

牛学超  祝庆斌  潘盼  邵鹏进  胡明  谢书鸿 《海洋工程》2020,38(6):151-157

钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。  相似文献   

张力腿平台筋腱支撑浮筒结构设计研究     

王火平  金文学  吕东  范志峰  王立权 《海洋工程》2018,36(3):69-75

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。  相似文献   

Parametric Vibration Analysis of Submerged Floating Tunnel Tension Legs     

SUN Sheng-nan  SU Zhi-bin  FENG Yun-fen  XU Xian-yi 《中国海洋工程》2020,(1):131-136

According to the characteristics of submerged floating tunnel anchored by tension legs,simplifying the tube as point mass and assuming that the tension leg is a nonlinear beam model hinged at both ends,the nonlinear vibration equation of the tension leg is derived.The equation is solved by the Galerkin method and Runge Kutta method.Subsequently,numerical analysis of typical submerged floating tunnel tension leg is carried out.It is shown that,the parametric vibration response of the submerged floating tunnel tension leg is related to the amplitude and frequency of the end excitation.Without considering axial resonance and transverse resonance,it is reasonable that higher order modes are abandoned and only the first three modes are considered.The axial resonance amplitude of the second or third order mode is equivalent to the first order mode axial resonance amplitude,which should not be ignored.  相似文献   

Micromechanical approach to swelling behavior of capillary-porous media with coupled physics     

Mahdad Eghbalian  Mehdi Pouragha  Richard Wan 《国际地质力学数值与分析法杂志》2019,43(1):353-380

A detailed multiscale analysis is presented of the swelling phenomenon in unsaturated clay-rich materials in the linear regime through homogenization. Herein, the structural complexity of the material is formulated as a three-scale, triple porosity medium within which microstructural information is transmitted across the various scales, leading ultimately to an enriched stress-deformation relation at the macroscopic scale. As a side note, such derived relationship leads to a tensorial stress partitioning that is reminiscent of a Terzaghi-like effective stress measure. Otherwise, a major result that stands out from previous works is the explicit expression of swelling stress and capillary stress in terms of micromechanical interactions at the very fine scale down to the clay platelet level, along with capillary stress emerging due to interactions between fluid phases at the different scales, including surface tension, pore size, and morphology. More importantly, the swelling stress is correlated with the disjoining forces due to electrochemical effects of charged ions on clay minerals and van der Waals forces at the nanoscale. The resulting analytical expressions also elucidate the role of the various physics in the deformational behavior of clayey material. Finally, the capability of the proposed formulation in capturing salient behaviors of unsaturated expansive clays is illustrated through some numerical examples.  相似文献   

超深水钻井作业隔水管顶张力确定方法   总被引：2，自引：0，他引：2  

鞠少栋  畅元江  陈国明  许亮斌  殷志明 《海洋工程》2011,29(1)

对于深水和超深水钻井作业,确定钻井隔水管系统顶张力是钻前设计非常重要的工作。研究三种隔水管系统顶张力确定方法,分别是理论方法、基于隔水管系统底部残余张力方法和基于下放隔水管系统的最大钩载方法。算例计算与超深水钻井实践对比表明,在相同的隔水管系统配置下,三种方法计算结果都接近于实际钻井作业时的顶张力设定值。但研究认为,基于下放最大钩载的顶张力计算方法简单实用,推荐作为优选方法。  相似文献   

pH值对适于页岩气储层的SDBS压裂液性能的影响研究          下载免费PDF全文

冯科玮  曹函  施皆能  吴坤  鲁晓敏 《探矿工程》2015,42(12):13-17

在低渗、低孔隙率页岩气储层压裂改造过程中,压裂液体系的pH值直接影响地层中的造缝、稳缝效果。pH值对阴离子表面活性剂压裂液的粘度、表面张力和页岩膨胀抑制性影响很大。通过改变阴离子表面活性剂的浓度,测定了在不同pH值条件下压裂液体系基本性能的变化。研究表明：SDBS压裂液体系的粘度随着pH值的增加先增大后减小,在pH值=9时达到最大;体系在pH值=5时降低体系表面张力的能力最好;页岩的膨胀量随着pH值的增大逐渐增大,在pH=7时膨胀量最大,且随着pH值的进一步增大,页岩膨胀量先减小后增大,在pH值=9时膨胀量最小;当体系的pH值一定时,SDBS在临界胶束浓度状态能够最大程度抑制页岩的膨胀。从化学微观角度上分析了pH值对SDBS压裂液性能的影响,有利于SDBS压裂液体系配方优化。  相似文献   

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks     

《Marine and Petroleum Geology》2015

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.  相似文献   

新型张力腿式储油处理平台的动力响应分析     

岑皓  王克用  赵胜涛  张海燕 《海洋技术学报》2015,34(5):97-103

针对目前小油田早期生产中存在的不足,提出一种适用于浅水海域的新型张力腿式储油处理平台,该平台主要由储油箱、浮箱、吸力桩、系泊链和甲板结构构成,具备原油处理和储存功能。应用非线性时域耦合分析法,研究了有义波高、平均波周期、水深对该平台的运动响应和系泊链张力的影响。计算结果表明,波高对平台动力响应有较大影响,有义波高每增加0.4 m,平台水平位移相应增加0.408 m,而系泊链力随有义波高的增加呈准线性增大;波周期对平台水平运动影响显著,平均波周期从6.5 s逐级变化至8.5 s时,最大水平位移自3.760 m渐增至5.467 m,而波周期对系泊链力影响较小,变化率一般小于10%;该新型平台对水深大于20 m的浅水海域有良好的动力特性,而对水深小于20 m的海域却表现异常。因此,该新型张力腿式平台能满足水深不小于20 m浅海区的油田早期生产需要。  相似文献   

深水立管设计标准中内波作用的分析与探讨     

李效民  崔鹏  张莉  郭海燕 《中国海洋大学学报(自然科学版)》2015,45(2):121-126

深水立管的设计、建造以及安装都必须依据相关规范进行,中国当前尚未出台专门针对立管设计的相关标准,现阶段还是以参考国外规范为主。本文首先对立管设计、安装中涉及的相关规范和工业标准进行介绍,论述当前国外API、ABS和DNV设计规范中关于深水立管环境条件及其载荷的相关规定,然后针对中国南海等海域普遍存在的内波现象,分析了内波尤其是内孤立波对顶张力立管的影响,结果表明,内孤立波会引起立管较大的位移以及较高的应力幅值,需要在设计分析中加以考虑。最后对中国在引入API、ABS和DNV等相关规范设计深水立管时提出相应的建议,以期为南海海域油气开发中立管的设计提供参考。  相似文献