共查询到20条相似文献，搜索用时 843 毫秒
1.
2.
A modeling scheme based on dynamic coupling of a high-resolution 1D cross-shore model to a 2DH area model is developed to calculate the total longshore sediment transport (LST) rate in wave-dominated coasts. The purpose of this coupling strategy aims at resolving the LST with a high-resolution (both temporally and spatially) inside the surf-zone and with a coarser spatial resolution seaward of the surf-zone. The 2DH area model operates on a fixed pre-designed regional grid (parent grid) and the 1D cross-shore model is dynamically coupled to the boundary of the parent grid with a time-varying domain, starting from the first wave breaking point and ending at the maximum wave set-up point. The time-varying domain is generated in the 1D model by resolving the landward wave propagation from the offshore conditions provided by the 2DH area model at every time step. With a high-resolution cell size the 1D model resolves the wave propagation processes and resulting LST along the profile. The coupled model is applied to study the LST in the Pomeranian Bight at the southern Baltic Sea. Simulation results are compared with three other different hierarchical modeling methods (from empirical formulas such as CERC and Kamphuis to a 2DH area simulation). The comparative study indicates that the dynamically coupled model can be a reliable tool in practical applications, especially for the areas where hydrodynamics is controlled by complex bathymetry (e.g., multiple longshore bars) or morphologically induced circulation patterns. 相似文献
3.
An improved coupling of numerical and physical models for simulating 2D wave propagation is developed in this paper. In the proposed model, an unstructured finite element model （FEM） based Boussinesq equations is applied for the numerical wave simulation, and a 2D piston-type wavemaker is used for the physical wave generation. An innovative scheme combining fourth-order Lagrange interpolation and Runge-Kutta scheme is described for solving the coupling equation. A Transfer function modulation method is presented to minimize the errors induced from the hydrodynamic invalidity of the coupling model and/or the mechanical capability of the wavemaker in area where nonlinearities or dispersion predominate. The overall performance and applicability of the coupling model has been experimentally validated by accounting for both regular and irregular waves and varying bathymetry. Experimental results show that the proposed numerical scheme and transfer function modulation method are efficient for the data transfer from the numerical model to the physical model up to a deterministic level. 相似文献
4.
An improved coupling of numerical and physical models for simulating 2D wave propagation is developed in this paper. In the proposed model, an unstructured finite element model (FEM) based Boussinesq equations is applied for the numerical wave simulation, and a 2D piston-type wavemaker is used for the physical wave generation. An innovative scheme combining fourth-order Lagrange interpolation and Runge-Kutta scheme is described for solving the coupling equation. A Transfer function modulation method is presented to minimize the errors induced from the hydrodynamic invalidity of the coupling model and/or the mechanical capability of the wavemaker in area where nonlinearities or dispersion predominate. The overall performance and applicability of the coupling model has been experimentally validated by accounting for both regular and irregular waves and varying bathymetry. Experimental results show that the proposed numerical scheme and transfer function modulation method are efficient for the data transfer from the numerical model to the physical model up to a deterministic level. 相似文献
5.
Understanding the hydrodynamic interactions between ocean waves and the oscillating water column (OWC) wave energy converter is crucial for improving the device performance. Most previous relevant studies have focused on testing onshore and offshore OWCs using 2D models and wave flumes. Conversely, this paper provides experimental results for a 3D offshore stationary OWC device subjected to regular waves of different heights and periods under a constant power take–off (PTO) damping simulated by an orifice plate of fixed diameter. In addition, a 3D computational fluid dynamics (CFD) model based on the RANS equations and volume of fluid (VOF) surface capturing scheme was developed and validated against the experimental data. Following the validation stage, an extensive campaign of computational tests was performed to (1) discover the impact of testing such an offshore OWC in a 2D domain or a wave flume on device efficiency and (2) investigate the correlation between the incoming wave height and the OWC front wall draught for a maximum efficiency via testing several front lip draughts for two different rear lip draughts under two wave heights and a constant PTO damping. It is found that the 2D and wave flume modelling of an offshore OWC significantly overestimate the overall power extraction efficiency, especially for wave frequencies higher than the chamber resonant frequency. Furthermore, a front lip submergence equal to the wave amplitude affords maximum efficiency whilst preventing air leakage, hence it is recommended that the front lip draught is minimized. 相似文献
6.
In this study, 1D and 2D shallow-water models were coupled to simulate unsteady flow in channel networks and embayment. The 1D model solved the 1D shallow-water equations (St. Venant) using the Preissmann box method and targeted long narrow reaches of the river networks, while the 2D model targeted broad channels and embayment and solved the 2D shallow-water equations using a semi-implicit scheme applied to an unstructured grid of triangular cells. The 1D and 2D models were solved simultaneously by building a matrix for the free surface elevation at every 1D junction and 2D cell center. Velocities were then computed explicitly based on the results at the previous time step and the updated water level. The originality of the scheme arose from a novel coupling method. The results showed that the coupled 1D/2D model produced identical results as the full 2D model in classical to benchmark problems with considerable savings in computational effort. Application of the model to the Pearl River Estuary in southern China showed that complex patterns of tidal wave propagation could be efficiently modeled. 相似文献
7.
非线性波浪时域计算的三维耦合模型 总被引：3，自引：1，他引：2
将计算区域Ω划分为内域Ω1和外域Ω2(Ω2=Ω-Ω1),外域控制方程采用改进线性频散特性的二维Boussinesq方程,用预报一校正法数值求解;结构物附近的内域控制方程为三维Navier-Stokes方程,由VOF方法数值求解。通过在外域和内域相匹配的交界面上设置合适的速度和波面边界条件,建立了三维非线性波浪时域计算的耦合模型。模拟试验表明:(1)耦合模型数值波浪水池可以产生稳定的、重复性较好的波动过程;(2)用耦合模型数值波浪水池求解较大浅水区域上的非线性波浪数值计算问题可以取得较高的计算效率,同时又能得出结构物附近的复杂流场。 相似文献
8.
The parabolic equation method provides an excellent combination of accuracy and efficiency for range-dependent ocean-acoustics and seismology problems. This approach is highly developed for problems in which the ocean bottom can be modeled as a fluid. For the elastic case, there remain accuracy limitations for problems involving sloping interfaces. Progress on this problem is achieved by improving and benchmarking the mapping solution. This approach is extended to handle multiple solid layers and propagation between sea and land. It is applied to new types of problems, such as the propagation of a Scholte wave up a sloping ocean bottom and conversion to a Rayleigh wave on land. Although the available benchmark solutions are limited, the results indicate that the mapping solution should be accurate for a large class of problems when slopes are small and that this assumption can be relaxed by applying a simple correction. 相似文献
9.
《Coastal Engineering》2006,53(11):947-963
A spectral/hp element method for solving enhanced Boussinesq-type equations in two horizontal dimensions is introduced. The numerical model is based on the discontinuous Galerkin method on unstructured meshes with expansions of arbitrary order. Numerical computations are used to illustrate that the computational efficiency of the model increases with increasing (i) expansion polynomial order, (ii) integration time and (iii) relative depth. Thus, the spectral/hp element technique appears to offers potentially significant savings in computational time for a fixed numerical error, compared to low-order numerical methods, for large-scale and long-time simulations of dispersive wave propagation. The practical applicability of the model is illustrated by several test cases. 相似文献
10.
The dynamic analysis of a deepwater floating structure is complex due to dynamic coupling between the platform and the moorings/risers. Furthermore, the system response at the incident wave frequency and at the resonant low frequency is coupled due to geometric and hydrodynamic nonlinearities. As such, it is generally held that a fully coupled time-domain analysis should be used for an accurate prediction of the dynamic response. However, in a recent work, it is found that for an ultra-deepwater floating system, a fully coupled frequency-domain analysis can provide highly accurate response predictions. One reason is the accuracy of the drag linearization procedure over the motions at two time scales, another is the minimal geometric nonlinearity of the moorings/risers in deepwater. In this paper, the frequency-domain approach is investigated for intermediate water depths, and it is found that the accuracy reduces substantially as geometric nonlinearity becomes important. Therefore, a novel hybrid approach is developed, in which the low-frequency motion is simulated in the time domain while the wave frequency motion is solved in the frequency domain at regular intervals. Coupling between the two analyses is effected by the fact that (i) the low-frequency motion affects the line geometry for the wave frequency motion, and (ii) the wave frequency motion affects the modeling of the drag forces, which damp the low-frequency motion. The method is found to be nearly as accurate as fully coupled time domain analysis even for a system with a preponderance of nonlinear and coupling effects, but requiring only one-tenth of the computational effort. 相似文献
11.
Further developments and applications of the 2D harmonic polynomial cell (HPC) method proposed by Shao and Faltinsen [22] are presented. First, a local potential flow solution coupled with the HPC method and based on the domain decomposition strategy is proposed to cope with singular potential flow characteristics at sharp corners fully submerged in a fluid. The results are verified by comparing them with the analytical added mass of a double-wedge in infinite fluid. The effect of the singular potential flow is not dominant for added mass and damping, but the error is non-negligible when calculating mean wave loads using direct pressure integration. Then, the double-layer nodes technique is used to simulate a thin free shear layer shed from lifting bodies, across which the velocity potential is discontinuous. The results are verified by comparing them with analytical results for steady and unsteady lifting problems of a flat plate in infinite fluid. The latter includes the Wagner problem and the Theodorsen functions. Satisfactory agreement with other numerical results is documented for steady linear flow past a foil and beneath the free surface. 相似文献
12.
A two-dimensional numerical wave flume based on SA-MPLS method 总被引：1，自引：0，他引：1
A spatially adaptive(SA) two-dimensional(2-D) numerical wave flume is presented based on the quadtree mesh system,in which a new multiple particle level set(MPLS) method is proposed to solve the problem of interface tracking,in which common intersection may be traversed by multiple interfaces.By using the adaptive mesh technique and the MPLS method,mesh resolution is updated automatically with time according to flow characteristics in the modeling process with higher resolution around the free surface and the solid boundary and lower resolution in less important area.The model has good performance in saving computer memory and CPU time and is validated by computational examples of small amplitude wave,second-order Stokes wave and cnoidal wave.Computational results also indicate that standing wave and wave overtopping are also reasonably simulated by the model. 相似文献
13.
SERR-1D is a 4th-order finite volume 1D Boussinesq model including wave breaking energy dissipation through extra diffusive-like terms. This model has been primarily conceived to compute wave propagation in coastal areas and has been validated for breaking and non-breaking waves propagating over uneven bathymetries (Cienfuegos et al., 2005, 2006a, b, 2007). The present paper aims at investigating the ability of SERR-1D to simulate challenging fluvial hydraulic applications such as sudden gate operation in open channels generating short waves, dam-break flows and a steady hydraulic jump over a bump. The performance of the absorbing-generating boundary condition implemented in SERR-1D is first analysed in the context of fluvial applications where relatively short waves must be evacuated from the computational domain without producing spurious reflection. Next, by comparing numerical results to analytical and experimental dam-break test cases we show that the model is able to reproduce the overall features of these flows, but that additional care should be paid to the representation of energy dissipation and front speed in order to accurately represent bore dynamics. 相似文献
14.
适于模拟不规则水域波浪的缓坡方程两种数值模型比较 总被引：1，自引：1，他引：0
本文分析比较了适于不规则水域波浪模拟的椭圆型缓坡方程两种数值模型。两种数值模型均采用有限体积法离散,分别基于四叉树网格和非结构化三角形网格建立。首先结合近岸缓坡地形上波浪传播的经典物理模型实验对两种数值模型分别进行了验证,并结合计算结果对比分析了两种模型的计算精度和效率。计算结果表明,两种数值模型均可有效地模拟近岸波浪的传播变形;相对非结构化三角形网格下的模型,基于四叉树网格建立的数值模型在数值离散和求解过程中无需引入形函数、不产生复杂的交叉项,离散简单,易于程序实现,且节约计算存储空间,计算效率高。 相似文献
15.
It is well known that the accuracy of mesh-based numerical simulations of underwater explosion strongly relies on the mesh size adopted in the analyses. Although a numerical analysis of underwater explosion can be performed with enough accuracy by using considerably fine meshes, such fine meshes may lead to substantially increase in the CPU time and the usage of computer memory. Thus, how to determine a suitable mesh size in numerical simulations is always a problem confronted when attempting to study the shock wave propagation resulting from underwater explosion and the subsequent response of structures. Considering that there is currently no universally accepted method for resolving this problem, this paper aims to propose a simple method to determine the mesh size for numerical simulations of near field underwater explosion. To this end, the mesh size effects on the shock wave propagation of underwater explosion are carefully investigated for different charge weights, through which the correlation between mesh sizes and charge weights is identified. Based on the numerical study, a dimensionless variable (λ), defined as the ratio of the radius of charge to the side length of element, is introduced to be the criterion for determining the mesh size in simulations. It is interesting to note that the presented method is suitable for various charge weights. By using the proposed meshing rule, adequate balance between solution accuracy and computational efficiency can be achieved for different blast scenarios in numerical simulations of underwater explosion. 相似文献
16.
It is difficult to compute far-field waves in a relative large area by using one wave generation model when a large calculation domain is needed because of large dimensions of the waterway and long distance of the required computing points. Variation of waterway bathymetry and nonlinearity in the far field cannot be included in a ship fixed process either. A coupled method combining a wave generation model and wave propagation model is then used in this paper to simulate the wash waves generated by the passing ship. A NURBS-based higher order panel method is adopted as the stationary wave generation model; a wave spectrum method and Boussinesq-type equation wave model are used as the wave propagation model for the constant water depth condition and variable water depth condition, respectively. The waves calculated by the NURBS-based higher order panel method in the near field are used as the input for the wave spectrum method and the Boussinesq-type equation wave model to obtain the far-field waves. With this approach it is possible to simulate the ship wash waves including the effects of water depth and waterway bathymetry. Parts of the calculated results are validated experimentally, and the agreement is demonstrated. The effects of ship wash waves on the moored ship are discussed by using a diffraction theory method. The results indicate that the prediction of the ship induced waves by coupling models is feasible. 相似文献
17.
Choi Young-Kwang Seo Seung-Nam Choi Jin-Yong Shi Fengyan Park Kwang-Soon 《海洋学报(英文版)》2019,38(7):36-47
A wave forecasting system using FUNWAVE-TVD which is based on the fully nonlinear Boussinesq equations by Chen(2006) was developed to provide an accurate wave prediction in the Port of Busan, South Korea. This system is linked to the Korea Operational Oceanographic System(KOOS) developed by Park et al.(2015). The computational domain covers a region of 9.6 km×7.0 km with a grid size of 2 m in both directions, which is sufficient to resolve short waves and dominant sea states. The total number of grid points exceeds 16 millions,making the model computational expensive. To provide real-time forecasting, an interpolation method, which is based on pre-calculated results of FUNWAVE-TVD and SWAN forecasting results at the FUNWAVE-TVD offshore boundary, was used. A total of 45 cases were pre-calculated, which took 71 days on 924 computational cores of a Linux cluster system. Wind wave generation and propagation from the deep water were computed using the SWAN in KOOS. SWAN results provided a boundary condition for the FUNWAVE-TVD forecasting system. To verify the model, wave observations were conducted at three locations inside the port in a time period of more than 7 months. A model/model comparison between FUNWAVE-TVD and SWAN was also carried out. It is found that, FUNWAVE-TVD improves the forecasting results significantly compared to SWAN which underestimates wave heights in sheltered areas due to incorrect physical mechanism of wave diffraction, as well as large wave heights caused by wave reflections inside the port. 相似文献
18.
M. M. F. Yuen 《Ocean Engineering》1987,14(1)
The wave diffraction problem on axisymmetric structures are solved by treating the fluid field as two separate domains. The velocity potential in the inner domain is represented by a 1/r type Green's function whilst that of the outer domain is represented by an eigenfunction expansion. The simple form of the Green's function in the inner domain reduces significantly the computational effort whilst the eigenfunction expansion in the outer domain is able to satisfy the radiation boundary condition completely. The method requires to have elements cover the entire containing boundary. Results for a number of typical structural geometries are presented and discussions are made on the effect of various parameters. 相似文献
19.
基于局域波分解的地震信号时频属性提取 总被引：1，自引：0，他引：1
局域波分解可以得到有意义的频率并可以抑制时频分布交叉项,是1种新的自适应信号分解方法.在局域波分解基本原理的基础上,研究基于局域波分解的地震信号分频谱及频率属性的提取方法.将局域波分解与传统时频分析结合,进行有效数值实现与对比分析,通过模型地震数据与实际2D地震数据试算验证方法的正确性和有效性.研究表明:基于局域波分解的Wigner时频分布分频谱,具有较高的时频分辨率,交叉项得到简单有效的抑制;基于局域波分解的时频分析方法计算提取的频率属性,避免无意义的负频率,物理意义明确,为在地震储层研究和油气检测中的正确应用奠定基础. 相似文献
20.