首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The city of Benevento (Southern Italy) has been repeatedly struck by large historical earthquakes. A heterogeneous geologic structure and widespread soft soil conditions make the estimation of site effects crucial for the seismic hazard assessment of the city. From 2000 until 2004, we installed seismic stations to collect earthquake data over zones with different geological conditions. Despite the high level of urban noise, we recorded more than 150 earthquakes at twelve sites. This data set yields the first, well documented experimental evidence for weak to moderate local amplifications. We investigated site effects primarily by the classical spectral ratio technique (CSR) using a rock station placed on the Benevento hill as reference. All sites in the Calore river valley and in the eastern part of the Benevento hill show a moderate high-frequency (f > 4 Hz) amplification peak. Conversely, sites in the Sabato river valley share weak-to-moderate amplification in a wide frequency band (from 1–2 to 7–10 Hz), without evident frequency peaks. Application of no-reference-site techniques to earthquake and noise data confirms the results of the CSRs in the sites of the Calore river valley and of the eastern part of the Benevento hill, but fails in providing indications for site effects in the Sabato river valley, being the H/V ratios nearly flat. One-dimensional modeling indicates that the ground motion amplification can be essentially explained in terms of a vertically varying geologic structure. High-frequency narrow peaks are caused by the strong impedance contrast existing between near-surface soft deposits and stiff cemented conglomerates. Conversely, broad-band amplifications in the Sabato river valley are likely due to a more complex layering with weak impedance contrasts both in the shallow and deep structure of the valley.  相似文献   

2.
This paper presents a non-linear finite element study to back-interpret the free field seismic response recorded at the Lotung Large-Scale Seismic Test site. The study is carried out in the time domain by the Finite Element (FE) code PLAXIS 3D, considering the vertical wave propagation of both the horizontal components of motion. The non-linear soil behaviour is simulated through a constitutive model, the Hardening Soil model with Small-Strain Stiffness (HSsmall), capable of describing the cyclic response of the material at different strain levels. In the paper, the constitutive response of the HSsmall model is firstly investigated through numerical simulations of strain-controlled cyclic shear tests under single and multi-directional conditions at low strain levels. Then, it is adopted to back-analyse the recorded free field seismic response, comparing the FE numerical results to the in-situ down-hole and surface signals recorded during two earthquakes occurred on May 20th and July 17th 1986, characterized by different peak ground accelerations.  相似文献   

3.
The 3D structure of the Mygdonian sedimentary basin (N. Greece) is investigated. The aim of this study is to propose a 3D model of this sedimentary structure that can later be used to model the seismic records currently being obtained by the permanent accelerograph network operating in the area. This model builds on previous efforts and incorporates new data. The geometry and dynamic properties of the soil layers were inverted using data from microtremor array measurements, seismic refraction profiles, boreholes, and geotechnical investigations. Phase-velocity dispersion curves of Rayleigh waves were determined at 27 sites in the basin using the spatial autocorrelation method (SPAC) introduced by Aki [1]. S-wave velocity profiles were inverted from these dispersion curves and the whole valley structure was interpolated using our new results and all previously available data. The proposed 3D model describes the geometry and shear-wave velocities of the Mygdonian and pre-Mygdonian sedimentary systems, and the top bedrock surface. Our results indicate that this 3D model correctly reflects the geometry and dynamic properties of the sedimentary layers. The case of Euroseistest, where the subsoil structure is the result of bringing together many disparate data, could be used as an example for similar alluvial basins throughout the world, where usually only scarce data is available.  相似文献   

4.
This paper presents a 2D model of the geological structure of Thessaloniki city and results of empirical and theoretical approaches for the evaluation of site response due to complex site effects. The construction of the 2D model is based on the available geophysical and geotechnical data in terms of the most important parameters needed to model site response. The well-known subsoil structure, despite the existence of some local uncertainties, gave the possibility to correlate the geometry and the dynamic properties of the 2D model with the results of site response determined from the analysis of one event in frequency and time domains and 1D numerical modelling. The study of site response shows the effect of the lateral variations on ground motion and suggests that the contribution of locally generated surface waves to the resonant peak may be important. In this case history, the limitations of the 1D approximation to simulate ground motion under complex soil conditions in both frequency and time domains are also shown. This paper lays the ground for a companion article dealing with 2D site effects.  相似文献   

5.
Vertical seismometer arrays represent a unique interaction between observed and predicted ground motions, and they are especially helpful for validating and comparing site response models. In this study, we perform comprehensive linear, equivalent-linear, and nonlinear site response analyses of 191 ground motions recorded at six validation sites in the Kiban–Kyoshin network (KiK-net) of vertical seismometer arrays in Japan. These sites, which span a range of geologic conditions, are selected because they meet the basic assumptions of one-dimensional (1D) wave propagation, and are therefore ideal for validating and calibrating 1D nonlinear soil models. We employ the equivalent-linear site response program SHAKE, the nonlinear site response program DEEPSOIL, and a nonlinear site response overlay model within the general finite element program Abaqus/Explicit. Using the results from this broad range of ground motions, we quantify the uncertainties of the alternative site response models, measure the strain levels at which the models break down, and provide general recommendations for performing site response analyses. Specifically, we find that at peak shear strains from 0.01% to 0.1%, linear site response models fail to accurately predict short-period ground motions; equivalent-linear and nonlinear models offer a significant improvement at strains beyond this level, with nonlinear models exhibiting a slight improvement over equivalent-linear models at strains greater than approximately 0.05%.  相似文献   

6.
The objective of this study is to investigate the effects of local site conditions in the Adapazarı plain crossing the severely damaged central part of Sakarya during the 17th August earthquake. A two-dimensional model has been used to obtain the free-field motions in the valley and on surface formations. A preliminary geotechnical profile model developed from available but limited soil data was checked using recordings of some specific locations where a strong ground motion accelerometer array was in operation after the main earthquake. The range of validity of the model was assessed and modifications were made to compare with the actual recorded motions. The purpose of building such a model, which was used to study the aftershocks in Adapazarı, is to provide an improved database to be used for the design of structures in the city. This study also attempts to provide greater insight into the local site response phenomena through the use of a two-dimensional nonlinear analysis. Simulated site responses are in global agreement with the recorded data. In general agreement between the amplification functions of the computed and recorded data is satisfactory for the frequencies of engineering interest. Alluvial sites show amplification factors in the range of 4–6 in the frequencies between 0.6 and 2 Hz. A relatively shallow alluvial station, HASTAHANE, experienced considerable amplification for small aftershocks and deamplification for the strongest aftershock in frequencies between 0.5 and 2 Hz. Another station, TOYOTA, with significant deamplification characteristics and a clearly observed peak response frequency shift at the soil resonant frequency may have experienced soil shear failure during the strongest aftershock. Other alluvial stations, SEKER and GENC, show deamplification characteristics at 0.55 and at around 1 Hz. with the peak frequency shifts during the magnitude 5.8 aftershock. In general, site responses are larger in the alluvial basin for all aftershocks except the magnitude 5.8 event.  相似文献   

7.
A detailed 2D model has been constructed and validated for Euroseistest valley, in northern Greece. We take advantage of this model to investigate what parameters, in addition to surface soil conditions (obviously the most important parameter), can be used to correctly characterize site response in a 2D structure. Through a parametric analysis using 2D numerical simulations for SH waves, we explore the differences between the computed ground motion for different simplifications of the valley's structure. We consider variations in the velocity structure within the sediments, and variations of the shape between sediments and bedrock. We also compare the results from different 1D models reflecting current approaches to the determination of site response. Our results show clearly that, in the case of Euroseistest, site response owes fundamentally to its closed basin shape because it is largely controlled by locally generated surface waves. Thus, in terms of predicting site response, a rough idea of its shape ratio and of the average mechanical properties of the sediments are better than a very detailed 1D profile at the central site. Although the details of ground motion may vary significantly between the models, the relative amount of surface waves generated in the 2D models seems to be relatively constant. Moreover, if we quantify the additional amplification caused by the lateral heterogeneity in terms of the ‘aggravation factor’ introduced by Chávez-García & Faccioli [7], a roughly constant factor between 2 and 3 seems to appropriately take into account the effects of lateral heterogeneity. Of course, a correct estimate of the overall impedance contrast is necessary to correctly predict the maximum amplification, a caveat that also applies to 1D models. In this sense, Euroseistest rings an alarm bell. In this valley the more significant impedance contrast lies at about 200 m depth, and it is missed both by consideration of the average shear wave velocity of the first 30 m (the Vs30 criterion) or using the detailed velocity profile down to a depth where a shear wave velocity larger than 750 m/s is found. Our conclusions indicate that, in order to improve current schemes to take into account site effects in building codes, the more to be gained comes from consideration of lateral heterogeneity, at least in the case of shallow alluvial valleys, where locally generated surface waves are likely to be important.  相似文献   

8.
Downhole records of seismically-induced soil liquefaction are a valuable source of information on the associated mechanisms of stiffness degradation and lateral spreading. In this paper, free-field downhole array seismic records are employed to identify and model the recorded response at Wildlife Refuge (California, USA) and Port Island (Kobe, Japan) sites. The Wildlife Refuge site was instrumented in 1982 with a two-accelerometer array and six piezometers that recorded a case of seismically induced site liquefaction. At Port Island, a four-accelerometer down-hole array recorded strong motion during the recent 1995 Hyogoken-Nanbu earthquake. This earthquake resulted in widespread liquefaction and major ground deformations at Port Island. Using the recorded downhole accelerations at these two sites, the actual seismic shear stress-strain histories are directly evaluated. These histories provide valuable insight into the mechanisms of site liquefaction and associated loss of stiffness and strength. Based on the identified dynamic soil behaviors, computational simulations of the observed seismic response are performed. Optimization techniques are employed to estimate the necessary computational modeling parameters. This document constitutes the second part of a set of two companion papers about site amplification and liquefaction.  相似文献   

9.
震害资料显示,场地条件对地震动特性以及工程结构破坏程度影响显著。为减少因场地效应而造成的经济损失和社会影响,在进行场地地震反应分析时,需最大限度地减小因场地土层模型参数的不确定性引起的地震动评估偏差,为工程结构地震反应分析选取并生成适当的地震动输入。随着强震动观测技术的逐渐发展,大量可靠的钻井台阵记录为地震过程中场地观测点的动力反应提供了直接数据。以美国加州地区La Cienega钻井台阵强震动观测数据为基础,利用互相关函数,对不同强度地震作用下场地土层的平均剪切波速进行分析,并在此基础上,以Cyclic 1D为模拟平台,建立一维自由场地地震反应有限元分析模型。分析结果表明：通过钻井台阵地震动观测数据识别,得到场地平均剪切波速,能够反映该场地的动力特性,数值模拟计算结果和台阵地震动记录基本吻合,可为数值模型参数选取提供依据。  相似文献   

10.
The paper presents a mathematical model for the deformation of soil under irregular cyclic loading in the simple-shear conditions. The model includes the possible change in the effective pressure in saturated soil due to the cyclic shearing, the reciprocal influence of the effective pressure on the response of the soil to the shear loading, and the pore pressure dissipation due to the seepage of the pore fluid. The hysteresis curves for the strain–stress relationship are constructed in such a way that they produce both the required backbone curve and the required damping ratio as functions of the strain amplitude. At the same time, the approach enables the constitutive functions involved in the model to be specified in various ways depending on the soil under study. The constitutive functions can be calibrated independently of each other from the conventional cyclic shear tests. The constitutive model is incorporated in the boundary value problem for the dynamic site response analysis of level ground. A numerical solution is presented for the dynamic deformation and liquefaction of soil at the Port Island site during the 1995 Hyogoken-Nambu earthquake.  相似文献   

11.
This study assesses the 3D amplification effects in shallow basins and quantifies the effects of site‐city interaction (SCI) on high‐rise buildings. A regional‐scale 3D spectral element simulation is conducted on the Tuen Mun‐Yuen Long basin, which contains multiple subbasins with heterogeneous and nonlinear soil profiles, while 3D city models with various building layouts are fully integrated into the basin model for our SCI study. We found a good correlation between spectral amplification factors and soil depths. Site response is significantly amplified at basin edges and centers due to surface waves generated at basin edges and the focusing effects stemming from 3D basin geometry. Transfer functions of 3D basins can be up to fourfold at fundamental frequencies as compared to 1D response, and further amplifications occur at high frequencies due to surface waves. In the SCI simulations, we observe wave trapping in the open space amid buildings resulting in energy concentration and up to twofold PGA amplifications. The wave trapping effect diminishes as the space between buildings increase beyond their range of influence (～100 m). The SCI analyses show that destructive kinetic energy in superstructures increases 28% in one horizontal direction but decreases 22% in the other. Our study concluded that, 1D site response analysis can significantly underestimate the seismic demand in shallow basins. Site‐city interaction of high‐rise buildings increases the short‐period spectra of ground motions, leading to an increase in their story accelerations by up to 50% and to a substantial decrease in the seismic safety of short structures in their vicinity.  相似文献   

12.
Due to hardware developments in the last decade, the high-frequency end of the frequency band of seismic waves analyzed for source mechanisms has been extended into the audio-frequency range (>20 Hz). In principle, the short wavelengths corresponding to these frequencies can provide information about the details of seismic sources, but in fact, much of the signal is the site response of the nearsurface. Several examples of waveform data recorded at hard rock sites, which are generally assumed to have a flat transfer function, are presented to demonstrate the severe signal distortions, includingf max, produced by near-surface structures. Analysis of the geology of a number of sites indicates that the overall attenuation of high-frequency (>1 Hz) seismic waves is controlled by the whole-path-Q between source and receiver but the presence of distinctf max site resonance peaks is controlled by the nature of the surface layer and the underlying near-surface structure. Models of vertical decoupling of the surface and nearsurface and horizontal decoupling of adjacent sites on hard rock outcrops are proposed and their behaviour is compared to the observations of hard rock site response. The upper bound to the frequency band of the seismic waves that contain significant source information which can be deconvolved from a site response or an array response is discussed in terms off max and the correlation of waveform distortion with the outcrop-scale geologic structure of hard rock sites. It is concluded that although the velocity structures of hard rock sites, unlike those of alluvium sites, allow some audio-frequency seismic energy to propagate to the surface, the resulting signals are a highly distorted, limited subset of the source spectra.  相似文献   

13.
Centrifuge modeling of seismic response of layered soft clay   总被引：1，自引：0，他引：1  
Centrifuge modeling is a valuable tool used to study the response of geotechnical structures to infrequent or extreme events such as earthquakes. A series of centrifuge model tests was conducted at 80g using an electro-hydraulic earthquake simulator mounted on the C-CORE geotechnical centrifuge to study the dynamic response of soft soils and seismic soil–structure interaction (SSI). The acceleration records at different locations within the soil bed and at its surface along with the settlement records at the surface were used to analyze the soft soil seismic response. In addition, the records of acceleration at the surface of a foundation model partially embedded in the soil were used to investigate the seismic SSI. Centrifuge data was used to evaluate the variation of shear modulus and damping ratio with shear strain amplitude and confining pressure, and to assess their effects on site response. Site response analysis using the measured shear wave velocity, estimated modulus reduction and damping ratio as input parameters produced good agreement with the measured site response. A spectral analysis of the results showed that the stiffness of the soil deposits had a significant effect on the characteristics of the input motions and the overall behavior of the structure. The peak surface acceleration measured in the centrifuge was significantly amplified, especially for low amplitude base acceleration. The amplification of the earthquake shaking as well as the frequency of the response spectra decreased with increasing earthquake intensity. The results clearly demonstrate that the layering system has to be considered, and not just the average shear wave velocity, when evaluating the local site effects.  相似文献   

14.
The vertical component of the seismic noise has been recorded in two different sites near the towns of Mercato S. Severino and Benevento in Southern Italy by a small aperture array, in order to investigate the characteristics of the noise propagation and to study the site response. Three different array techniques have been applied in the two investigated sites: Beam Forming, High Resolution and Spatial Correlation methods. We used two simple array geometry for localising possible noise sources and estimating local shallow structure using ambient noise. The cross shaped array results effective for determining the phase velocity of waves in the case when the noise is from a single localised source; the circular array, on the other hand, is successfully used when the noise sources are distributed. The main results are: the analysis of a coherent component of the noise recorded in the two sites, interpreted as Rayleigh waves, results in reasonable velocity models; the noise recorded in the M.S.S. Plain is a space stationary signal, while the noise at the Benevento site is possibly produced by a stable noise source located close to the array. Due to this evidence, the correlation method does not yield satisfactory results when applied to the Benevento site. The 2–6 Hz spectral peaks of the noise recorded in the M.S.S. Plain can be interpreted as due to a site effect, considering the satisfactory agreement of the noise spectrum at those frequencies with the theoretical transfer function computed on the basis of the velocity model deduced from the Rayleigh waves dispersion analysis.  相似文献   

15.
A generalized spring multi-Winkler model is developed for the static and dynamic response of rigid caisson foundations of circular, square, or rectangular plan, embedded in a homogeneous elastic. The model, referred to as a four-spring Winkler model, uses four types of springs to model the interaction between soil and caisson: lateral translational springs distributed along the length of the caisson relating horizontal displacement at a particular depth to lateral soil resistance (resultant of normal and shear tractions on the caisson periphery); similarly distributed rotational springs relating rotation of the caisson to the moment increment developed by the vertical shear tractions on the caisson periphery; and concentrated translational and rotational springs relating, respectively, resultant horizontal shear force with displacement, and overturning moment with rotation, at the base of the caisson. For the dynamic problem each spring is accompanied by an associated dashpot in parallel. Utilising elastodynamic theoretical available in the literature results for rigid embedded foundations, closed-form expressions are derived for the various springs and dashpots of caissons with rectangular and circular plan shape. The response of a caisson to lateral static and dynamic loading at its top, and to kinematically-induced loading arising from vertical seismic shear wave propagation, is then studied parametrically. Comparisons with results from 3D finite element analysis and other available theoretical methods demonstrate the reliability of the model, the need for which arises from its easy extension to multi-layered and nonlinear inelastic soil. Such an extension is presented in the companion papers by the authors [Gerolymos N, Gazetas G. Development of Winkler model for lateral static and dynamic response of caisson foundations with soil and interface nonlinearities. Soil Dyn Earthq Eng. Submitted companion paper; Gerolymos N, Gazetas G. Static and dynamic response of massive caisson foundations with soil and interface nonlinearities—validation and results. Soil Dyn Earthq Eng. Submitted companion paper.].  相似文献   

16.
After the recent Central Italy Earthquake of the 6th April 2009 (Mw = 6.3), the Italian and German engineer and geophysicist Task Force carried out a wide characterization of sites, buildings and damages. In Navelli, a town about 35 km far from epicentre, heavy damage occurred on a reinforced concrete (RC) building that represent an anomalous case of damage, when compared with those occurred in the neighbouring area. In this paper, characterization of the site and damage of the Navelli RC Building is reported and discussed. We performed ambient noise and strong motion measurements, installing one three-directional accelerometer on each floor of the structure and two in free-field, and we have carried out repeated measurements using a couple of three-directional tromometers. In the mean time, a geological survey was carried out and the site response was investigated, with the aid of down-hole measurements. It was thus possible to investigate the structural response and damage taking into account site condition. One of the main results of this work is that repeating analyses using ambient noise measurements show that the main structural frequencies reached after the first damaging shock are constant over time, and then the structural behaviour appears stationary at long term. On the other hand, the strong motion recordings show that the building exhibits a transient non-stationary behaviour as the fundamental frequency changes during each aftershock, then returning to the starting value after each event.  相似文献   

17.
Based on the principle formula for the four-component strainmeters, we can directly obtain the specific plane strain, shear strain and azimuthal angle of the principal strain, and the maximum and minimum principal strains calculated afterwards are the indirect result. The problems of practicality of the sensitivity coefficients A and B of plane strain and shear strain are then discussed. Based on this idea, we analyzed the observation data of several four-component borehole strainmeters near the epicenter of the Yiliang MS5.7 earthquake in 2012 and the Ludian MS6.5 earthquake in 2014 in the Zhaotong area, Yunnan Province. The results show that the analysis based on the perspective of plane strain and shear strain has an obviously better effect than that based on the component readings, and can directly peel off the respective abnormality of the plane strain and shear strain. In addition, the correlation coefficient curves between measured data of two plane strains show significant anomalies which often occur several days before and during the earthquake.  相似文献   

18.
This study investigated the seismic performance and soil‐structure interaction of a scoured bridge models with pile foundation by shaking table tests using a biaxial laminar shear box. The bridge pier model with pile foundation comprised a lumped mass representing the superstructure, a steel pier, and a footing supported by a single aluminum pile within dry silica sand. End of the pile was fixed at the bottom of the shear box to simulate the scenario that the pile was embedded in a firm stratum of rock. The bridge pier model was subjected to one‐directional shakes, including white noise and earthquake records. The performance of the bridge pier model with pile foundation was discussed for different scoured conditions. It is found that the moment demand of pile increases with the increase of scoured depth whereas the moment demand of the bridge pier decreases, and this transition may induce the bridge failure mechanism transform from pier to pile. The seismic demand on scoured pile foundations may be underestimated and misinterpreted to a certain degree. When evaluating the system damping ratio with SSI, the system response may not be significantly changed even if the soil viscous damping contribution is varied. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

19.
地基土单元体在地震荷载作用下将产生主应力轴连续旋转,不同的应力耦合模式对土的强度、孔压以及变形等特性影响显著。利用GCTS空心圆柱扭剪仪,对天津滨海软土场地饱和黏性土进行K0固结下的不同应力耦合模式的循环剪切试验。着重对比相同应力路径下竖向和扭剪双向耦合加载模式,内外围压和扭剪的三向耦合加载模式以内外围压、竖向和扭剪的四向耦合加载模式条件下饱和黏性土的变形特性、循环软化特性。试验结果表明:在相同的动强度下,四向耦合应力模式更容易破坏且变形特性以及软化特性较双向、三向耦合下发展更加迅速;剪应力分量对试样软化变形特性的影响更加显著。  相似文献   

20.
Geotechnical site conditions that can be very different due to changes in thickness and properties of soil layers, depth of bedrock and water table are among the main factors controlling earthquake characteristics on the ground surface. Soil layers subjected to cyclic stresses may lead to degradation of stress–strain and shear strength properties. The laboratory tests were conducted to evaluate the changes in the stress–strain and shear strength characteristics in terms of threshold cyclic shear stresses and cyclic yield stress. The effects of local site conditions are assessed based on geotechnical site conditions and earthquake source characteristics.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号