共查询到15条相似文献，搜索用时 156 毫秒
1.
针对1 000 m水深作业的新型圆筒型浮式生产储卸油系统（FPSO）,选择多点系泊FPSO和穿梭油轮串靠外输方案,分析串靠方案在中国南海的可行性。FPSO和穿梭油轮作业时两者之间相互影响的研究较为重要,通过ANSYS-AQWA建立水动力耦合分析模型,基于多浮体水动力学方法进行时域耦合仿真模拟。在FPSO作业海况下,分析了串靠外输时系泊锚链及系泊大缆的张力特性和两浮体的运动响应,对大缆的长度和刚度参数变化进行了分析。结果表明：串靠外输方案满足新型圆筒型FPSO的作业环境。随着系泊大缆长度增加,其张力最值逐渐减小,FPSO和穿梭油轮的最小间距逐渐增大。两浮体最小距离稳定在83 m左右。随着系泊大缆刚度增加,其张力最值增大,相比于大缆长度,大缆刚度对耦合系统的影响较弱。 相似文献
2.
3.
基于动态耦合的FPSO串靠外输所需拖力快速预报 总被引：1，自引：0，他引：1
以极浅水作业水深的FPSO串靠外输作业为背景,研究穿梭油轮尾部定位拖轮所需拖力大小,提出了基于动态耦合效应的拖轮拖力直接计算方法。基于三维势流理论,考虑浮式生产储油平台(FPSO)与穿梭油轮之间相互水动力干扰,进行动态耦合计算,根据力学平衡原理求得所需的拖轮拖力并分析其影响因素。结果表明:动态耦合模型算出的所需拖力值较之准动态模型更安全、经济;当FPSO与穿梭油轮距离为80 m时,既能保证外输安全性又能保证经济性;增大两船间距、增加穿梭油轮吃水、两船间采用双缆系泊,均能有效降低所需的拖轮拖力。研究结果可为FPSO串靠外输作业操作提供指导,具有一定的工程实用性。 相似文献
4.
目前,由于串靠外输方式具有对船舶吨位差异及装载状况要求小、海况适应力强、系泊力小、解脱迅速等优点,而被广泛运用于浮式生产储卸油平台(FPSO)外输作业中。串靠提油作业时,位于穿梭油轮尾部的拖轮能够提供的最大有效拖力直接影响到了作业的安全性。为完善串靠提油作业时所需拖轮拖力的研究,提出更加合理的拖轮选型理论依据,就需要对拖力进行数值计算。首先,对FPSO与穿梭油轮串靠外输系统绕系泊单点旋转时所受风、浪、流等环境载荷进行全面考虑,建立了准动态受力平衡模型;然后,运用经验公式及AQWA软件计算出环境载荷大小,并依据计算结果拟合出环境载荷曲线;最后,配合受力平衡方程求解出能够保障作业安全进行所需的最小拖力。依照此方法计算所得拖力选取的拖轮能够兼顾作业安全性和使用经济性。 相似文献
5.
FPSO与穿梭油轮进行串靠外输过程中,穿梭油轮首部可能与FPSO尾部发生碰撞事故,称为"尾碰"。目前的相关研究主要集中在碰撞过程中的风险分析,缺少对FPSO"尾碰"事故碰撞性能的合理分析与评估。本文针对某15万吨级FPSO,基于动态非线性有限元分析软件ABAQUS,采用同步损伤分析技术,研究了串靠外输过程中FPSO与穿梭油轮之间由于过分纵荡运动而引起的碰撞事故。通过数值仿真计算,分析了包括"尾碰"后结构的损伤变形、应力应变关系、碰撞力和吸能情况的船舶碰撞内部动力学,进而对FPSO尾部结构的碰撞性能进行评估。结果表明,FPSO尾部结构中板材结构吸收的能量约占尾部结构总吸能的75.5%,其吸能能力显著优于T型骨材结构,研究结果对FPSO尾部结构的耐撞性设计具有一定的参考意义。 相似文献
6.
7.
FPSO水动力研究与进展 总被引：4，自引：2，他引：2
浮式生产储油轮(FPSO)是当今海洋石油天然气开发的主流工程设施。就目前国际上最为关注的FPSO水动力问题,包括深水FPSO与系泊、立管系统的耦合水动力预报、甲板上浪、FPSO与穿梭油轮组成的多浮体系统水动力、横摇运动与减摇措施、单点系泊FPSO的运动稳定性等进行了阐述,介绍了我国在浅水FPSO水动力问题上的研究进展,提出加强相关研究的建议。 相似文献
8.
9.
我国的边际油田大多年产量小且开发年限短，周围没有可依托设施的油田。针对此情况，可采用“蜜蜂式”开发模式。针对浸没式可移动外输终端这一新型概念设计，选取关键工况开展了时域耦合分析，研究了系泊系统参数对可移动外输终端最大水平位移和系泊缆最大张力的影响。以可移动外输终端最大水平位移和系泊缆最大张力最小为优化目标，以系泊缆结构安全为约束条件，构建了系泊系统多目标优化模型。分别建立了基于NSGA-Ⅱ和多目标粒子群算法的系泊系统优化框架，并应用这两种算法对系泊系统进行了优化设计。结果表明，NSGA-Ⅱ和多目标粒子群算法均可以解决系泊系统多目标优化问题，粒子群算法优化速度快，但通过NSGA-Ⅱ得到的Pareto前沿优化性能更好，因此更适合开展浸没式可移动外输终端的系泊系统优化。 相似文献
10.
基于多体动力分析方法进行FPSO和水下软钢臂系泊系统的运动特性研究。相较于非线性弹簧模拟软钢臂系泊系统或者其他近似模拟方法,多体分析方法可以充分考虑系泊系统具体结构形式及其动力项对FPSO运动性能的影响,更好的预报系统运动响应和系泊力。本文将FPSO和水下钢臂结构模拟成2个具有6自由度的独立结构,两者用系泊链组进行连接。基于三维势流理论应用汇源分布法,首先在频域内进行FPSO的水动力参数分析,进而在时域内对系统进行耦合动力分析。本文重点讨论系泊系统黏性力和二阶波浪力对系统响应的影响,计算结果发现系泊系统黏性力对系泊力有一定影响,而在浅水条件下二阶波浪力的计算对准确预报系统运动及系泊力非常重要。 相似文献
11.
The floating production storage and offloading unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport. Robust prediction of extreme hawser tensions during the FPSO offloading operation is an important safety concern. Excessive hawser tension may occur during certain sea conditions, posing an operational risk. In this paper, the finite element method (FEM) software ANSYS AQWA has been employed to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions.In some practical situations, it would be useful to improve the accuracy of some statistical predictions based on a certain stochastic random process, given another synchronous highly correlated stochastic process that has been measured for a longer time, than the process of interest. In this paper, the issue of improving extreme value prediction has been addressed. In other words, an efficient transfer of information is necessary between two synchronous, highly correlated stochastic processes. Two such highly correlated FPSO hawser tension processes were simulated in order to test the efficiency of the proposed technique. 相似文献
12.
The coupled system of two side-by-side fixed and/or floating bodies interacting with a large amplitude nonlinear wave is studied using a direct time domain solution method. The numerical model is based on a three-dimensional mixed Eulerian–Lagrangian (MEL) method under certain simplifying approximations permitting Rankine panel scheme to be implemented over a time-invariant boundary surface to solve the boundary value problem for the unknown velocity potentials. A 4th order Adams–Bashforth–Moulton scheme is used for time marching of rigid-body motion histories of the individual bodies and evolution of the free-surface including the gap region in which large resonant fluid motions occur. A systematic study has been carried out to evaluate the performance of the developed time domain method in simulating the forces and motions as well as the fluid motion in the gap region for the two body system under various arrangements and in different wave-headings. At first, the computed numerical results have been validated and verified with computational and experimental results available in literature for standard geometries such as vertical truncated cylinders and rectangular boxes. Secondly, effectiveness of the damping lid model which is introduced to suppress wave resonance in the gap region is investigated including its influence on maximum sway forces on fixed and floating rectangular barges in side-by-side configurations. Thirdly, comparative studies on absolute and relative motion response for two cases (two rectangular barges, and a FLNG-FPSO + shuttle tanker) in side-by-side arrangement are detailed to bring out the importance of nonlinearities arising due to steep nonlinear incident waves. Finally, coupled motions of the two-body system of an FPSO and a shuttle tanker floating in side-by-side configuration in a steep nonlinear wave field are studied in which the two bodies are connected through hawsers, and also the FPSO is moored to the ground. Additionally there is a fender between the two bodies. 相似文献
13.
Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels 总被引：2，自引：0，他引：2
This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies. 相似文献
14.
当FPSO服役于目标油田时,将受到风浪流的作用力。其中,风力给FPSO一个恒定的静力,使其偏离原来的位置。风力计算在FPSO系泊系统的分析过程中是非常重要的。设计人员常常参考OCIMF进行风力计算,或者参考API规范得出。OCIMF为针对油轮的计算规范,但使用OCIMF计算FPSO风力及流力的方法,与FPSO的适应性仍需要进一步论证。API规范针对海上浮式系统,其计算风流力的方法使用也非常广泛,其原理为将FPSO上部各个模块风力叠加得出。以FPSO风载荷为研究对象,开展了风洞模型试验,获得了典型FPSO风载荷特性曲线,并将试验结果分别与OCIMF结果和API规范计算结果进行对比分析,最终给出FPSO风力计算方法的建议。本数据可用于FPSO的风力计算,也可为FPSO运动、系泊的设计研究提供参考。 相似文献