共查询到20条相似文献，搜索用时 46 毫秒
1.
3种蚶染色体组型的比较研究 总被引：13，自引：0，他引：13
用鳃细胞空气干燥法制片,对双壳纲翼形亚纲蚶科泥蚶、毛蚶、魁蚶的染色体组型进行了分析研究。它们的染色体数目(2n)和总臂数(NF)都相同,但是染色体组型不同,泥蚶染色体组型2n=38,28m+10sm;毛蚶2n=38,14m+22sm+2st;魁蚶2n=38,12m+20sm+6st.亚端(st)着丝点类型染色体泥蚶没有,毛蚶有1对,魁蚶有3对。3种蚶染色体组型都是以中部(m)和亚中部(sm)着丝点染色体为主要类型;染色体长度由大到小都呈比较均匀地递减;最大染色体的绝对长度都不超过5μm,最小的都在2μm左右。臂间倒位可能在染色体进化过程中起重要作用。3种蚶种间杂交是有可能的。 相似文献
2.
法螺(Chanoria tritonis)染色体核型分析 总被引：2，自引：1，他引：1
法螺(Chanoria tritonis)是珊瑚敌害生物长棘海星的天敌,在维持珊瑚礁生态系统平衡中具有重要作用。近年来由于人类过量捕杀,法螺数量急剧减少,开展法螺的人工繁育工作迫在眉睫。染色体研究是遗传育种工作的基础。目前,有关法螺的染色体研究在世界范围内尚属空白。本实验以法螺面盘幼虫为材料,采用秋水仙素溶液及低渗溶液处理,热滴片法制片,对染色体进行Giemsa染色来研究法螺的核型。结果表明,法螺染色体二倍体数2n=70,核型为2n=32m+18sm+20st,NF=120。部分分裂相中出现2条异形染色体,是否为性染色体还有待确认。染色体组中第2对和第16对中部着丝粒染色体上具有次缢痕。对我国已进行过染色体核型研究的腹足纲贝类进行统计表明,法螺是目前已知的染色体数目最多的物种。 相似文献
3.
4.
以多齿围沙蚕Perinereis nuntia(Savigny,1818)幼体为材料,研究染色体组型,2n=28,NF=56,其中中部着丝点(m)染色体4对;亚中部着丝点(sm)染色体10对。 相似文献
5.
用六线鳚脾脏为材料研究其染色体组型,2n=48,NF=48,全部为端部着丝点染色体。 相似文献
6.
中国海洋贝类染色体研究进展 总被引：8，自引：0，他引：8
概括总结了我国已报道的40种海洋贝类的染色体组型研究结果,腹足纲的染色体数目有2n=30,34,36和60;双壳纲的染色体数目有2n=20,22,28,32,34和38等几种类型。分析了贝类染色体制备的特点,预先向活贝体内注射PHA,可有效地增加中期分裂相。产生核型差异的原因可能是制片时的处理条件不同或因染色体结构重排以及地域差异造成的同种异体之间的核型多态。双壳纲和绝大多数腹足纲贝类都没有性染色体,而非整倍体是染色体畸变的结果。最后介绍了显带技术和荧光原位杂交技术在贝类染色体研究中的应用现状,认为FISH技术将为贝类染色体的鉴定提供有效的方法。 相似文献
7.
环境细菌宏基因组研究及海洋细菌生物活性物质BAC文库筛选 总被引：3，自引：0，他引：3
宏基因组是特定环境全部生物遗传物质总和 ,决定生物群体生命现象。特定生物种基因组研究使人们的认识单元实现了从单一基因到基因集合的转变 ,宏基因组研究将使人们摆脱物种界限 ,揭示更高更复杂层次上的生命运动规律。在目前的基因结构功能认识和基因操作技术背景下 ,环境细菌宏基因组成为研究和开发的主要对象。环境细菌宏基因组细菌人工染色体文库筛选和基因系统学分析使研究者能更有效地开发细菌基因资源 ,更深入地洞察环境细菌多样性 相似文献
8.
9.
10.
选取栉孔扇贝Chlamys farreri担轮幼虫为材料,采用秋水仙素-低渗-空气干燥法制备染色体标本,应用荧光显带技术,分析了DAPI带和PI带在栉孔扇贝染色体上的分布。DAPI带型结果显示,栉孔扇贝所有染色体上都存在DAPI阳性带,主要分布于传统的着丝粒区和端部区域,另外还存在一些中间区DAPI带及可变带,总带数为62。PI带型结果与DAPI带型结果相似,在所有染色体上都存在PI阳性带。2种带型的阳性带所在位置与异染色质分布区域相吻合。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.