共查询到17条相似文献，搜索用时 45 毫秒
1.
弹性液舱内液体晃荡实验研究 总被引：1，自引：0，他引：1
通过物理模型实验,对水平简谐激励下弹性矩形液舱内液体晃荡问题进行了研究。实验中给出了不同液深和不同激励振幅下弹性液舱内液体最低阶固有频率。采用影像采集与分析系统获得液舱内自由液面的形状和高度,通过压力采集系统得到舱壁上的压力分布。实验中分析了不同液深、不同激励频率下弹性和刚性液舱内自由液面高度和晃荡压力的变化特性。比较了弹性和刚性液舱内不同位置处自由液面高度随外界激励频率的变化规律,以及舱壁上不同位置处的压力峰值随外界激励频率的变化规律。结果表明:非共振情况下,弹性和刚性实验结果及理论值三者的波高和压力较为接近。共振情况下,弹性和刚性波高基本相等,在近舱壁处二者明显大于理论值,而在远离舱壁处二者与理论值存在一定差别;弹性压力较刚性压力略小,但二者与理论值差别较大。 相似文献
2.
液舱晃荡是船舶与海洋工程领域的热点问题,有效地抑制液舱晃荡、减小壁面冲击载荷关系着船体结构的安全。使用内嵌隔板是抑制舱内晃荡,减小壁面冲击载荷的有效手段。实际工程中,内嵌隔板的最优设计的前提是对隔板抑制晃荡的机理有深入了解。CIP法具有高精度、低耗散等特点,以THINC格式捕捉自由液面,可以再现液面破碎、翻卷、涡旋以及液滴飞溅等现象。基于此法,建立了数值液舱,对比了单一隔板和组合隔板抑制晃荡的效果。结果表明,内嵌隔板的安装在水平位置上应尽量靠近舱底中线,在垂直位置上应尽量靠近自由液面,且液面附近安装的双垂直隔板抑制晃荡能力最佳。 相似文献
3.
基于黏性流理论,采用动网格技术和6自由度模型,以及动量源方法,建立了双浮板液舱晃荡的数值模型。分别采用3种不同空间步长的网格离散计算区域,进行了网格收敛性验证。通过光滑液舱晃荡的模型试验和解析得到的爬高最大值,验证了数值模型的精确性。在载液率为50%,激励幅值为2 mm条件下,对双浮板液舱晃荡进行了数值计算,与光滑液舱相比,双浮板液舱晃荡的最大爬高明显减小。通过一个激励周期内双浮板液舱晃荡的波面显示发现,液舱晃荡模式由光滑液舱的驻波模式变为U管模式,晃荡模式的改变起到了明显地抑制液舱晃荡的效果。 相似文献
4.
MPS方法数值模拟液舱晃荡问题 总被引：1，自引：0，他引：1
基于无网格粒子法MPS方法(moving particle semi-implicit method)研究了液舱晃荡问题。针对二维矩形液舱晃荡问题进行了数值验证,结果表明MPS方法能够很好地计算晃荡产生的拍击压力。同时将MPS方法应用到带隔板的液舱晃荡问题计算中,分析了二维和三维带隔板液舱晃荡问题。计算结果表明:隔板的存在很大程度地限制了流体的水平运动,隔板附近出现了自由面的翻卷、破碎和融合现象,MPS方法能够很好地模拟这些流动现象。计算得到的波高与实验测得的波高吻合较好,表明MPS方法模拟带隔板的晃荡问题具有一定的可靠性。 相似文献
5.
独立B型LNG液舱内部设置舱壁板材及多种桁材,有效缓解了液舱晃荡效应。针对晃荡载荷下的独立B型LNG液舱结构多目标优化,利用规范中的公式计算晃荡载荷,并引入液舱晃荡系数,以期综合反映液舱内部构件对晃荡特性的影响,在此基础上进一步建立以液舱结构重量和液舱晃荡系数为目标的多目标优化模型,采用多目标遗传算法(NCGA),计算得到改进的独立B型LNG液舱结构设计方案。 相似文献
6.
从无旋运动的理论出发,并利用微扰法,推导了液舱三维晃荡运动二阶共振问题的理论解。考虑纵荡和横荡运动情况,对液舱三维晃荡二阶共振问题进行了分析。当两个晃荡方向的和频(即其外部激发频率的和)或差频(即其外部激发频率的差值)等于液舱固有频率时,二阶共振发生;当某一晃荡方向(横荡或纵荡)外部激发频率与另一晃荡方向(纵荡或横荡方向)液舱某一固有频率的和或差值等于液舱另一固有频率时,二阶共振也会发生。进一步研究了各个二阶共振激发频率下水深变化对晃荡振幅的影响。结果表明,对于两个晃荡方向外部激发频率的和频和单一晃荡方向(纵荡或横荡)某一个激发频率与另一晃荡方向(横荡或纵荡)某一个属于奇模的固有频率的和频所引发的共振情况,水深变化对共振振幅大小的影响比较大;而对于相应差频所引发的共振情况,水深变化对共振振幅大小的影响比较小。 相似文献
7.
通过物理模型实验,对弹性侧壁液舱和刚性液舱内液体晃荡问题进行了研究。由于流固耦合的影响,弹性侧壁液舱内液体晃荡的最低阶固有频率稍小于同尺寸的刚性液舱内液体晃荡的最低阶固有频率。液舱模型处于纵向简谐激励作用下,其中激励频率在最低阶固有频率附近。实验分析两种相对液深比h/L=0.167和h/L=0.333,在二阶模态的次共振和一阶模态的共振状况下,对弹性侧壁液舱与刚性液舱内不同测点的波面、振幅谱和晃动波高进行对比分析。结果表明:在浅液深(h/L=0.167)一阶共振下,流固耦合对波面形态的影响比较明显,弹性侧壁液舱内测点晃动波高明显大于刚性液舱内对应测点波高;而在一般液深(h/L=0.333)一阶共振下,水弹性效应减弱,弹性侧壁液舱与刚性液舱内对应测点处波高差异较小。 相似文献
8.
《中国海洋大学学报(自然科学版)》2017,(5)
基于三维边界元方法研究了三维轴对称体入水砰击载荷的数值算法。算法从三维力学模型出发,继承了Wagner自由液面抬升理论,引入浸深因子Cw以确定自由液面抬升高度,并且将自由液面线性化处理,同时考虑网格运动,在自由液面附近对网格进行截断重构,以确保水下湿面积的精准。算法中使用考虑加权运动项的非线性伯努利方程计算得到入水结构的表面压力,进一步积分可得入水结构的总体受力。此外,文中分别通过Nisewanger的圆球入水试验与Alaoui的圆锥入水试验对算法的正确性及适用性进行了验证。 相似文献
9.
截至目前,国内外少有成功开展深水管道抗压承载力海上试验的案例,而海上试验对于验证室内压力舱模拟试验结果可靠性是非常必要的。对深水管道屈曲压溃及屈曲传播海上试验进行了设想和分析,并设计了试验流程。考虑到室内压力舱的加载特性,屈曲传播试验会受到若干因素影响,结合数值模拟,考虑屈曲传播海上试验中可能出现的各种加载条件对管道屈曲传播压力的影响进行了研究。数值模拟的结果与室内压力舱试验的结果之间存在一定差异,对该现象存在的原因进行了分析。还对试验中可能存在的问题及需要注意的关键难点提出了解决方案。 相似文献
10.
《中国海洋大学学报(自然科学版)》2017,(12)
调谐液体阻尼器(TLD)是有效的结构减振装置。TLD在激励作用下内部液体运动属于晃荡问题。本文建立了求解二维不可压缩Navier-Stokes方程的数值模型。数值模型采用对时间积分的分步方法求解压力项,THINC格式捕捉自由面。利用晃荡试验数据验证了模型计算结果的正确性。模拟了不同深度的浅水TLD在不同频率激励作用下内部液体的运动,计算了TLD晃荡产生的阻尼力。分析激励频率对TLD中液体运动的形态和阻尼力的影响。浅水TLD中液体运动形态主要为行波。TLD产生的阻尼力受激励频率影响,在固有频率附近产生共振现象,阻尼力大,减振效果理想。 相似文献
11.
The crashworthiness of the cargo containment systems (CCSs) of a floating liquid natural gas (FLNG) and the side structures in side-by-side offloading operations scenario are studied in this paper. An FLNG vessel is exposed to potential threats from collisions with a liquid natural gas carrier (LNGC) during the offloading operations, which has been confirmed by a model test of FLNG-LNGC side-by-side offloading operations. A nonlinear finite element code LS-DYNA is used to simulate the collision scenarios during the offloading operations. Finite element models of an FLNG vessel and an LNGC are established for the purpose of this study, including a detailed LNG cargo containment system in the FLNG side model. Based on the parameters obtained from the model test and potential dangerous accidents, typical collision scenarios are defined to conduct a comprehensive study. To evaluate the safety of the FLNG vessel, a limit state is proposed based on the structural responses of the LNG CCS. The different characteristics of the structural responses for the primary structural components, energy dissipation and collision forces are obtained for various scenarios. Deformation of the inner hull is found to have a great effect on the responses of the LNG CCS, with approximately 160 mm deformation corresponding to the limit state. Densely arranged web frames can absorb over 35% of the collision energy and be proved to greatly enhance the crashwo-rthiness of the FLNG side structures. 相似文献
12.
Hydrodynamic performance of an ultra deep turret-moored Floating Liquefied Natural Gas(FLNG) system is investigated.Hydrodynamic modeling of a turret-moored FLNG system,in consideration of the coupling effects of the vessel and its mooring lines,has been addressed in details.Based on the boundary element method,a 3-D panel model of the FLNG vessel and the related free water surface model are established,and the first-order and second-order mean-drift wave loads and other hydrodynamic coefficients are calculated.A systematic model test program consisting of the white noise wave test,offset test and irregular wave test combined with current and wind,etc.is performed to verify the numerical model.Owing to the depth limit of the water basin,the model test is carried out for the hydrodynamics of the FLNG coupled with only the truncated mooring system.The numerical simulation model features well the hydrodynamic performance of the FLNG system obtained from the model tests.The hydrodynamic characteristics presented in both the numerical simulations and the physical model tests would serve as the guidance for the ongoing project of FLNG system. 相似文献
13.
In the present study, three-dimensional sloshing phenomena occurring in liquid cargo tanks are numerically simulated. The Navier-Stokes equations and continuity equation are used for the governing equations, and solved with a finite difference method in a rectangular fixed staggered mesh system. The positions of free surface are defined by the Marker density method satisfying the free-surface boundary conditions, and the flows of the gas and liquid regions are simulated simultaneously. The irregular leg length and star method is employed on the cells near the free surface for the computations of pressure. The computation results are compared with other experimental results to verify the consistency of the present numerical method, and the agreements are reasonably good. Furthermore, the flow characteristics inside a partially filled liquid tank of a real sized ship oscillating regularly and irregularly are computed to verify the possibility of practical application of the present method. 相似文献
14.
The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks. 相似文献
15.
We investigated the use of numerical methods to predict liquid sloshing phenomena in a moving tank and compared our results to model test measurements. The numerical techniques for the free surface, based on the so-called finite Volume-of-Fluid (VoF) approach, comprised an incompressible VoF method, an incompressible coupled Level-Set and Volume-of-Fluid (clsVoF) method, and a compressible VoF method. We assessed the capability of these three numerical methods to achieve suitable numerical predictions of sloshing phenomena, specifically, air pockets and bubbles on the free surface inside a test tank. To observe the described sloshing phenomena, we simulated tank motions leading to well defined single impact wave motions. We performed repeated physical tests for validation purposes. Computed velocity and pressure time histories were compared to experimental data we obtained from Particle Image Velocimetry (PIV) and pressure sensor measurement. Grid sensitivity and turbulence model studies were performed. We demonstrated that the compressible VoF method was the most suitable method to obtain accurate predictions of sloshing phenomena. 相似文献
16.
R.D. Firouz-Abadi 《Ocean Engineering》2011,38(1):11-21
This paper aims at developing a modal approach for the non-linear analysis of sloshing in an arbitrary-shape tank under both horizontal and vertical excitations. For this purpose, the perturbation technique is employed and the potential flow is adopted as the liquid sloshing model. The first- and second-order kinematic and dynamic boundary conditions of the liquid-free surface are used along with a boundary element model which is formulated in terms of the velocity potential of the liquid-free surface. The boundary element model is used to determine the natural mode shapes of sloshing and their corresponding frequencies. Using the modal analysis technique, a non-linear model is presented for the calculation of the first- and second-order potential which can be used to obtain a reduced-order model for the sloshing dynamics. The results of the presented model are verified with the analytical solution for the second-order analysis of sloshing in a rectangular tank and very good results were obtained. Also, the second-order sloshing in some other example tanks with complex bed shapes is studied. The second-order resonance conditions of liquid sloshing in the example tanks are investigated and some conclusions are drawn. 相似文献
17.
Sloshing in a three-dimensional rectangular tank: Numerical simulation and experimental validation 总被引：1，自引：0，他引：1
Pressure variations and three-dimensional effects on liquid sloshing loads in a moving partially filled rectangular tank have been carried out numerically and experimentally. A numerical algorithm based on the volume of fluid (VOF) technique is used to study the non-linear behavior and damping characteristics of liquid sloshing. A moving coordinate system is used to include the non-linearity and avoid the complex boundary conditions of moving walls. The numerical model solves the complete Navier–Stokes equations in primitive variables by using of the finite difference approximations. In order to mitigate a series of discrete impacts, the signal computed is averaged over several time steps. In order to assess the accuracy of the method used, computations are compared with the experimental results. Several configurations of both baffled and unbaffled tanks are studied. Comparisons show good agreement for both impact and non- impact type slosh loads in the cases investigated. 相似文献