首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Ye  Yin  Wang  Kun-lin  You  Ya-ge  Sheng  Song-wei 《中国海洋工程》2019,33(5):618-627
The "Sharp Eagle" device is a wave energy converter of a hinged double floating body. The wave-absorbing floating body hinges on the semi-submerged floating body structure. Under the action of wave, the wave-absorbing floating body rotates around the hinge point, and the wave energy can be converted into kinetic energy. In this paper, the power take-off system of "Sharp Eagle II" wave energy converter(the second generation of "Sharp Eagle") was studied, which adopts the hydraulic type power take-off system. The 0-1 power generation mode was applied in this system to make the "Sharp Eagle II" operate under various wave conditions. The principle of power generation was introduced in detail, and the power take-off system was simulated. Three groups of different movement period inputs were used to simulate three kinds of wave conditions, and the simulation results were obtained under three different working conditions. In addition, the prototype of "Sharp Eagle II" wave energy converter was tested on land and in real sea conditions. The experimental data have been collected, and the experimental data and simulation results were compared and validated. This work has laid a foundation for the design and application of the following "Sharp Eagle" series of devices.  相似文献   

2.
A computer model to simulate the formation of underwater images has been developed. The model incorporates the inherent and apparent properties of the propagation of light in water. An image is approximated as a linear superposition of several image components. The model has been used to simulate the relative advantages of different camera/light configurations. The results indicate that extremely large gains in image contrast can be obtained by careful design of beam patterns and the manipulation of camera and light locations. The performance of range-gated systems is explored, and it is demonstrated that these systems are presently power limited. In order to obtain better quality images at larger distances, an imaging configuration which consists of scanning an incoherent light beam across the field of view of a camera is proposed. The incoherent light-scanning system is shown to have advantages over both conventional imaging techniques and range-gated methods  相似文献   

3.
A wave power device includes an energy harvesting system and a power take-off system. The power take-off system of a floating wave energy device is the key that converts wave energy into other forms. A set of hydraulic power take-off system, which suits for the floating wave energy devices, includes hydraulic system and power generation system. The hydraulic control system uses a special“self-hydraulic control system”to control hydraulic system to release or save energy under the maximum and the minimum pressures. The maximum pressure is enhanced to 23 MPa, the minimum to 9 MPa. Quite a few experiments show that the recent hydraulic system is evidently improved in efficiency and reliability than our previous one, that is expected to be great significant in the research and development of our prototype about wave energy conversion.  相似文献   

4.
Field tests conducted on a wave-power pump showed that this simple design conceived by Professor John D. Isaacs is suitable for wave-energy extraction around the Hawaiian Islands. In the small model tested, over 200 W of mechanical power were produced. Larger models could extract several orders of magnitude more power. Further research needs to be done with prototype models. The transmission of the power to the shore still needs to be examined.A by-product of the operation of the pump is nutrient rich water pumped from the bottom of the pipe. In our test, the water was pumped from 300 ft. It is feasible with a similar design that the water can be pumped from 1000 ft where the water is richer in nutrients. This water could then be used to stimulate the growth of marine plants.  相似文献   

5.
A newly developed video and camera system for tidal flat microtopographic studies is presented. It consists of a SONY handy cam placed in an underwater housing mounted on a frame about 70?cm above the sediment surface. A rectangular surface area of 30?×40?cm is imaged by the camera. The camera records video sequences and/or digital images at predetermined time lapses. The total number of images is about 540, and a similar number of 10-second long video sequences can be recorded. The camera is programmed with a PC before deployment, and the total deployment time depends on the time lapse between recordings. The camera is connected to an external power supply (12?volt), and a halogen projector pointing towards the sediment surface ensures that the system is operable on a 24-hours scale. The system has been tested in the Danish Wadden Sea. It has proved to be a very useful tool in studies of topographic effects of erosion and deposition sequences, and for studies of benthic organisms-sediment interactions. The test site was further equipped with sensors for water and seabed measurements, which proved to be indispensable regarding the interpretation of recorded image time-series.  相似文献   

6.
A newly developed video and camera system for tidal flat microtopographic studies is presented. It consists of a SONY handy cam placed in an underwater housing mounted on a frame about 70 cm above the sediment surface. A rectangular surface area of 30 ×40 cm is imaged by the camera. The camera records video sequences and/or digital images at predetermined time lapses. The total number of images is about 540, and a similar number of 10-second long video sequences can be recorded. The camera is programmed with a PC before deployment, and the total deployment time depends on the time lapse between recordings. The camera is connected to an external power supply (12 volt), and a halogen projector pointing towards the sediment surface ensures that the system is operable on a 24-hours scale. The system has been tested in the Danish Wadden Sea. It has proved to be a very useful tool in studies of topographic effects of erosion and deposition sequences, and for studies of benthic organisms-sediment interactions. The test site was further equipped with sensors for water and seabed measurements, which proved to be indispensable regarding the interpretation of recorded image time-series.  相似文献   

7.
The In Situ Vane (ISV) system has been developed to determine the strength profile within the upper 1.5 m of deep sea clays. The system is designed to operate in 6000-m water depth after one-year dormancy on the bottom and consists of four integrated packages; controller and data acquisition system, mechanical system, volume compensator, and power supply. This paper describes development of a prototype which was used under a pressure of 550 bars after a 30-day dormancy and of the full system which was successfully used in a deep water (5800 m) test. In the first full application of the system the ISV will be used to measure changes in sediment strength caused by high temperature (300degC) as part of the U.S. Subseabed Disposal Program.  相似文献   

8.
文章针对海洋渔业由于过度捕捞造成渔业资源枯竭的问题,提出了一种基于海洋遥感(ORS)、全球定位系统(GPS)和海洋地理信息系统(MGIS)等高新技术的海洋捕捞与海水养殖监管系统设计方案,可以远程自动对海洋渔业区域的水质多参数信息和养殖环境视频信息进行综合采集、传输及监控,也可以自动采集传输渔船RFID身份识别信息、渔船AIS自动识别信息、渔船GPS定位信息和捕捞生产视频信息等,并通过海洋精细渔业专家系统ES进行渔业养殖监控、渔业环境资源监测评估、渔船船数和功率数控制和海洋捕捞生产渔情监测等。该系统可以实现海洋渔业精细化捕捞和海洋渔业精细化养殖,促进海洋渔业可持续发展。  相似文献   

9.
A bucket wheel dredge (BWD) for offshore tin mining is part of the long term plan of PT Timah Tbk to identify new dredging technologies for mining in greater than 50 m water depths. Measured tin-ore physical properties are used in a new BWD computer model to investigate deep water tin mining. The model simulates the cutting and hydraulic transport of submerged tin-ore. The results show that hydraulic tin mining beyond water depths of 50 m is feasible. It is best to employ hydraulic transport for lifting the tin-ore from the ocean floor to the surface and to use barges to transport the tin-ore to land processing plants.  相似文献   

10.
A simple underwater video system has been developed for simultaneously imaging sediment suspension and monitoring bed profiles under waves and combined wave-current flows. This consists of a diode-laser-generated light plane and a black-and-white underwater video camera. The laser light illuminates suspended material in section and also provides a bed profile at the bottom. Orthogonal laser/camera pairs are used to obtain both cross-shore and alongshore views. During deployments, the system has been augmented by acoustic backscatter devices for measurement of sediment concentration. As with all video techniques, visibility is a limiting factor, but where turbidity is low to moderate, the results are encouraging. Results on cross-shore and alongshore bed elevation variations and suspension event stales obtained with the video/laser system are presented for two experiments: one at the National Research Council Wave Research Flume in Ottawa, Canada, and the other in the field at Queensland Beach, N.S., Canada,  相似文献   

11.
A new numerical finite difference iteration method for refraction-diffraction of waves in waterof slowly varying current and topography is developed in this paper.And corresponding theoretical modelincluding the dissipation term is briefly described,together with some analysis and comparison ofcomputational results of the model with measurements in a hydraulic scale model(Berkhoff et al.,1982).An example of practical use of the method is given,showing that the present model is useful to engineeringpractice.  相似文献   

12.
A heaving-buoy wave energy converter equipped with hydraulic power take-off is studied in this paper. This wave energy converter system is divided into five subsystems: a heaving buoy, hydraulic pump, pipelines, non-return check valves and a hydraulic motor combined with an electric generator. A dynamic model was developed by considering the interactions between the subsystems in a state space form. The transient pressures caused by starting/stopping the buoy or closing/opening the check valves were predicted numerically using the established model. The simulation results show that transmission line dynamics play a dominant role in the studied wave energy converter system. The length of the pipeline will not only affect the amplitude of the transient pressures but also affect the converted power. The variation of the time-averaged converted electric power with the pipeline length is estimated using the simulation method for the buoy exposed to one irregular sea state. Finally, it is suggested how reduced power efficiency due to the pipelines may be ameliorated.  相似文献   

13.
The basic functionality and performance of a new Schlumberger active wireline heave compensation system on the JOIDES Resolution was evaluated during the sea trial and a 3-year period of the IODP Phase II operations. A suite of software programs was developed to enable real-time monitoring of the dynamics of logging tools, and assess the efficiency of wireline heave compensation during downhole operations. The evaluation of the system effectiveness was performed under normal logging conditions as well as during stationary tests. Logging data were analyzed for their overall quality and repeatability, and to assess the reliability of high-resolution data such as formation microscanner (FMS) electrical images. This revealed that the system reduces 65–80 % of displacement or 88–98 % variance of downhole tool motion in stationary mode under heave conditions of ±0.2–1.5 m and water depths of 300–4,500 m in open holes. Under similar water/heave conditions, the compensator system reduces tool displacement by 50–60 %, or 75–84 % variance in downhole tool motion during normal logging operations. Such compensation efficiency (CE) is comparable to previous compensation systems, but using advanced and upgradeable technologies, and provides 50–85 % heave motion and heave variance attenuation. Moreover, logging down/up at low speeds (300–600 m/h) reduces the system’s CE values by 15–20 %, and logging down at higher speeds (1,000–1,200 m/h) eliminates CE values by 55–65 %. Considering the high quality of the logging data collected, it is concluded that the new system can provide an improved level of compensation over previous systems. Also, if practically feasible, future integration of downhole cable dynamics as an input feedback into the current system could further improve its compensation efficiency during logging operations.  相似文献   

14.
海洋钻修井装置作业前检验,是海上钻修井作业过程中的重要环节。做好作业前检验工作,使作业装置满足作业和安全的要求,是后续作业顺利、安全、高效进行的重要保障。文章根据南海西部近5年来海洋钻修井装置作业前检验工作的现状,从管理、技术层面对作业前检验存在的问题进行剖析,并给出了相关建议。如：作业前检验全生命周期管理的流程及强化措施;保持验船人员的公用机制;引进、培养一支固定的验船队伍;制定验船标准化手册;增加验船技术手段等。为进一步提高海洋钻修井装置检验质量及海上钻修井作业保驾护航。  相似文献   

15.
文章针对海上风电工程结构安全监测的需求,在系统回顾了目前的主要监测现状及存在的监测难点的基础上,初步构建了水上、水下一体化安全监测体系基础框架,阐述了主要的工作流程,重点探讨了海上风电工程安全监测中的精密单点定位（PPP）技术、高程传递、多传感器集成、精密水下定位技术、水下摄像机标校、水下三维激光点云快速建模、水下桩基全景影像与点云数据匹配、多波束与侧扫声呐数据融合等关键技术,以期为海上风电工程结构设施管控、变化监控和防灾减灾提供新的应急方案和技术支撑。  相似文献   

16.
  相似文献   

17.
深水网箱投饵机设计与试验研究   总被引：15，自引：0，他引：15  
根据网箱养殖的特点,结合网箱养殖的经验,设计了1种深水网箱投饵机,并进行了相应的试验,测定了不同情况下产生的真空度以及在冲饵管和吸饵管不同开度时的下料时间。此投饵机使用水力环流供饵、水力抽负吸饵、水动力投饵,充分利用了丰富的海水资源,用汽油机水泵作动力,利用管道将饵料抛向网箱,可向多个、距离不同的网箱供饵。作为1种新的投饵机具,可用于网箱养鱼和池塘养鱼的投饵。  相似文献   

18.
This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.  相似文献   

19.
The apparent stability constants for chloride and sulfate ions with Co (II) at ionic strength of 0.67 were determined by the cation exchange method. The value of the stability constant 1 for chloride ion with Co (II) ion was 0.79±0.055. The stability constants 1, 2 and 3 for sulfate ion with Co (II) ion were 12.0±0.27, 91.5±11.4 and l,110±250, respectively. The chemical species of Co (II) in seawater was estimated at the pH of 8.0 to be present as Co2+ (63%), CoCl+ (27%) and CoSO4 0 (8.6%) using the known value of dissociation constant of Co (II), and under the assumption that only major inorganic anions are responsible for the chemical equilibrium of Co (II).  相似文献   

20.
A relatively simple and inexpensive distance monitoring system (DMS) was devised to monitor continuously and accurately the position of an underwater camera with an attached pinger relative to the sea floor. Although the precision graphic recorder (PGR) or precision depth recorder (PDR) have hitherto been used to record the pinger to bottom distance, these complicated and expensive instruments are not always expected on all vessels.This newly developed system, which measures with a counting timer the interval between the direct sound pulses generated by a pinger and the bottom echoes, yielded results equal to or better than that of the PGR. The distance information thus obtained was accurate within ±2.5% under good conditions (calm weather and flat and level topography) just above the sea bed. This system simplified the photographing operations and made it possible to obtain a precise and quantitative assessment of the epibenthic fauna with the use of a single camera.The DMS is also applicable for determining the precise location of a bottom water sampler, grab sampler, or other underwater oceanographic equipment as well as that of an underwater camera.A part of this research was supported by science research fund from the Ministry of Education.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号