共查询到20条相似文献，搜索用时 31 毫秒
1.
Tereza Šindelárová Michal Kozubek Jaroslav Chum Kateřina Potužníková 《Studia Geophysica et Geodaetica》2016,60(4):747-762
Infrasound environments in the Czech microbarograph network were studied. Reference Fourier amplitude spectra were calculated from data measured at three microbarograph sites of the network in May 2011-April 2012; directional analysis of infrasound arrivals in the frequency band 0.15-0.4 Hz was performed for the microbarograph array at Panská Ves in May 2014-April 2015. Diurnal, seasonal and site-to-site variability of the reference spectra was evaluated. Site-to-site variability is influenced by the location of the respective sensors in the open air and inside the observatory buildings and by local noise phenomena like wind turbines. Diurnal variability is well developed in summer with maximum ambient noise levels during the daytime and minima at night. Seasonal variability is observed at night with maxima in winter and minima in summer. Wind and wind eddies seem to be an important source of ambient noise in measurements in the Czech microbarograph network. A distinct spectral peak occurs near 0.2 Hz with amplitudes by about one order of magnitude higher in winter than in summer. Its seasonal variability is related to seasonal propagation of microbaroms from the source region in the Northern Atlantic. 相似文献
2.
3.
对塔院井地下水水位微动态资料和气压观测资料,采用三种方法计算了气压效率,作了谱分析和调和分析,并利用所得结果求出了该井所在含水层的水文地质参数 相似文献
4.
Over the past two decades, superconducting gravimeters (SGs) have been a key tool to investigate a number of geophysical processes leading to time-variable gravity changes. As SGs are relative meters, even though they are the most sensitive and stable devices currently available, they need to be accurately calibrated. Each branch of Earth sciences that benefits from high-precision gravity monitoring demands calibration of gravity sensors to accuracy of better than 0.1%. This research deals with a calibration experiment performed at the Strasbourg (France) SG site by means of two FG5 (#206 and #211) absolute gravimeters (AGs) and new-generation spring meters (Scintrex Ltd. Autograv CG-3M and CG5 and Microg-LaCoste gPhone). Our goal is to try to use the newest generation of spring mechanical gravimeters (MGs) for calibrating SGs. We discuss the results in terms of precision and accuracy of the SG calibration by means of different metrological and methodological approaches. With the FG5 #211 we derive scale factors for the SG-GWR C026 located in Strasbourg in agreement with those routinely obtained since 1997 by means of the FG5 #206. This confirms that the estimation of the scale factors is independent of the AG sensor. From a moving-window regression analysis between the synthetic body tides and both the SG and MG gravity records we detect significant fluctuations of the SG scale factors over time due to the instability of the instrumental sensitivity of the MGs. Our main results demonstrate that, owing to the time variability of their sensitivity, the used spring meters, even if well calibrated, cannot be used as a stable reference for SGs. As a result, MGs are not suitable to replace AGs for SG calibration, and we conclude that currently the method using parallel recording with absolute gravity meters is still the most feasible calibration approach for SGs. 相似文献
5.
Abdolreza Bahremand Sajad Ahmadyousefi Vahedberdi Sheikh Chooghi Bairam Komaki 《水文研究》2021,35(1):e13992
Hydrologic models are simplified representations of natural hydrologic systems. Since these models rely on assumptions and simplifications to capture some aspects of hydrological processes, calibration of parameters is unavoidable. However, utilizing the philosophy of a recent modelling framework proposed by Bahremand (2016), we show how calibration of most model parameters can be avoided by allocating or presetting these parameters utilizing knowledge gained from sensitivity analyses, field observations and a priori specifications as a part of a parameter allocation procedure. This paper details the simulation of daily river flow of the Shemshak-Roudak watershed performed using the Python version of the WetSpa model. The WetSpa-Python model is a distributed model of hydrological processes applied at the watershed scale. The model was applied to the Shemshak-Roudak watershed of Iran with parameter allocation. Model calibration involved only two parameters. Straightforward methods were proposed for allocating model parameters, including three baseflow-related parameters and the determination of maximum active groundwater storage using a mass curve technique. Also, the Budyko curve was used to constrain a correction factor for potential evapotranspiration. The WetSpa-Python model was extended to include the influence of snowmelt. A failure to include snow in the hydrological processes of the WetSpa-Python model creates a significant discrepancy between the observed and simulated hydrographs during the spring. The results of daily simulations for 12 years (2002–2014) are in good agreement with observations of discharge (Kling-Gupta Efficiency = 0.84). These results demonstrate that it is feasible to simulate hydrographs with limited calibration given a knowledge of hydrological processes and an understanding of relationships between catchment characteristics and model parameters. 相似文献
6.
气压变化及其对地壳形变和深井水位的影响 总被引：2，自引：0，他引：2
根据北京塔院地区1984和1985年的微气压计记录采用频谱分析和调和分析两种方法得出了大气潮谱的详细结构;用负荷勒甫数代替潮汐勒甫数,仿照固体潮的有关公式,导出了大气潮引起的地壳应变和地倾斜公式;使用北京塔院井的水位观测资料结合当地的气压资料,分析了气压变化对深井水位的影响.理论计算和实测资料的分析结果基本相符,特别是两种结果都得出S2大气潮引起的体膨胀约为S2固体潮体膨胀的20％. 相似文献
7.
I. Marson 《Geophysical Prospecting》2012,60(2):361-372
We report here the results obtained during a feasibility study that was pursued in order to evaluate the performances of absolute airborne gravimetry. In contrast to relative systems, which use spring‐type gravimeters, each measurement acquired by absolute systems is independent from the others and the instrument is not suffering from problems like instrumental drift, frequency response of the spring and variation of the calibration factor. After a validation of the dynamic performance of the experimental setup in a moving truck, a comparison between the experimental airborne data retrieved over the Swiss Alps and those obtained by ground upward continuation at flight altitude allow us to state that airborne absolute gravimetry is feasible. The first test flight shows a spatial resolution comparable to those obtained by relative airborne gravimetry. For a wavelength on the order of 12 km the absolute value of gravity can be evaluated with an uncertainty of 6.9 mGal. 相似文献
8.
9.
根据北京塔院地区1984和1985年的微气压计记录采用频谱分析和调和分析两种方法得出了大气潮谱的详细结构;用负荷勒甫数代替潮汐勒甫数,仿照固体潮的有关公式,导出了大气潮引起的地壳应变和地倾斜公式;使用北京塔院井的水位观测资料结合当地的气压资料,分析了气压变化对深井水位的影响.理论计算和实测资料的分析结果基本相符,特别是两种结果都得出S_2大气潮引起的体膨胀约为S_2固体潮体膨胀的20％. 相似文献
10.
Herbert Ssegane Devendra M. Amatya Augustine Muwamba George M. Chescheir Tim Appelboom E.W. Tollner Jami E. Nettles Mohamed A. Youssef François Birgand R.W. Skaggs 《水文研究》2017,31(20):3458-3471
Historically, paired watershed studies have been used to quantify the hydrological effects of land use and management practices by concurrently monitoring 2 similar watersheds during calibration (pretreatment) and post‐treatment periods. This study characterizes seasonal water table and flow response to rainfall during the calibration period and tests a change detection technique of moving sums of recursive residuals (MOSUM) to select calibration periods for each control–treatment watershed pair when the regression coefficients for daily water table elevation were most stable to minimize regression model uncertainty. The control and treatment watersheds were 1 watershed of 3–4‐year‐old intensely managed loblolly pine (Pinus taeda L.) with natural understory, 1 watershed of 3–4‐year‐old loblolly pine intercropped with switchgrass (Panicum virgatum), 1 watershed of 14–15‐year‐old thinned loblolly pine with natural understory (control), and 1 watershed of switchgrass only. The study period spanned from 2009 to 2012. Silvicultural operational practices during this period acted as external factors, potentially shifting hydrologic calibration relationships between control and treatment watersheds. MOSUM results indicated significant changes in regression parameters due to silvicultural operations and were used to identify stable relationships for water table elevation. None of the calibration relationships developed using this method were significantly different from the classical calibration relationship based on published historical data. We attribute that to the similarity of historical and 2010–2012 leaf area index on control and treatment watersheds as moderated by the emergent vegetation. Although the MOSUM approach does not eliminate the need for true calibration data or replace the classic paired watershed approach, our results show that it may be an effective alternative approach when true data are unavailable, as it minimizes the impacts of external disturbances other than the treatment of interest. 相似文献
11.
地震之前长周期的地壳运动已为人们所关注,然而在零漂等问题尚未解决之前,长周期地震仪观测仍处于试验性阶段.另外,震前地气的喷溢和释放,只能在喷口处观测,距离稍远,就观测不到了,但由此而引起的大气振动和声学现象,却可在一定距离范围内观测到.因而可开展震前由长周期运动和地气等引起的大气声波、重力波等微气压波的观测研究.地震波所激发的次声[1],前人已有研究,但地震前的次声,中外文献还未见报道.1976年唐山地震后的1976年8月至1977年3月,笔者在北京首次开展微气压波的观测,发现了十余次地震前的微气压波,其特征为40—80秒的周期,1—5微巴的声压,波列很短,仅数分钟,出现于震前1—16小时.本文提出了识别震前微压波的分析方法,并讨论了其产生的可能机制和有关的临震现象. 相似文献
12.
Robert Ley Willem Adolfs Ralph Bridle Mohammad Al-Homaili Aldo Vesnaver Paul Ras 《Geophysical Prospecting》2006,54(6):751-762
In land surveys, the weathering layer can often distort the seismic signal due to it passing through rapid velocity and density changes, dispersion, scattering and inelastic absorption. In a simple spring‐dashpot model for the earth response, an equivalent medium groups these complex phenomena into two parameters only; these are called ground viscosity and ground stiffness. The most recent controllers for vibrators can estimate both parameters. To validate these measurements, Saudi Aramco conducted an experiment measuring ground viscosity and stiffness from two different vibrator control systems over an area of varying terrain conditions, including unconsolidated sand and limestone outcrop. The two systems measured different values, but detected similar trends that correlated well with weathering conditions and surface geology, e.g. lower viscosity values on the outcrop than on the sand. The ratio of ground viscosity to ground stiffness can approximate the shallow S‐wave velocity, which we converted into P‐wave velocity through calibration with sparse uphole data. Static corrections incorporating this velocity information somewhat improved the focusing of seismic time sections. This new approach does not require additional acquisition efforts, and can model shallow complex formations in arid areas where classical static methods often fail. 相似文献
13.
为探讨摇摆-自复位（Rocking Self-Centering,RSC）桥墩的滞回行为并为其数值建模提供依据,基于OpenSees地震分析平台发展此类结构的多弹簧模型并开展系统性讨论。结合RSC桥墩的构造特点发展多弹簧模型的整体建模思路,着重对比三种弹簧分布（基于Gauss积分和Lobatto积分的分布及均匀分布）模式下RSC桥墩的整体力-位移响应,对弹簧所需设置个数进行优化分析,并讨论了弹簧刚度的校准过程。最后,基于现有研究的5个RSC桥墩试件的试验结果,通过对比滞回曲线,发现所建议的模拟方法可较为准确地模拟RSC桥墩在拟静力荷载下的刚度、强度、滞回行为及残余位移。 相似文献
14.
为满足台阵地震计标定要求,通过对程控化标定测控仪和标定测控软件的研究,采用一种适用于台阵地震计的程控化正弦标定方法,对中国地震局地球物理勘探中心负责管理的台阵地震计进行标定。台阵地震计标定实验结果显示,采用程控化正弦标定方法,在缩短标定时长、提高标定效率方面具有显著效果。 相似文献
15.
We present a method for real-time forecasting of water table depth and soil moisture profiles. The method combines a simple form of data-assimilation with a moving window calibration of a deterministic model describing flow in the unsaturated zone and local as well as regional drainage. The local drainage level is calibrated on-line using a moving window calibration. Assigning more weight to the last available measurements then yields a form of model adaptation that is in between on-line calibration and data-assimilation (i.e. a simplified form of Newtonian nudging). Five-day hydrological forecasts are performed based on 5-day weather forecasts, while on-line observations of phreatic level and soil moisture content are assimilated on a daily basis. Advantages of the proposed method are that it improves the real-time forecasts compared to off-line calibration and ordinary moving window calibration and that it yields physically consistent soil moisture profiles. 相似文献
16.
Ziegler C. Kirk Israelsson Peter H. Connolly John P. 《Water Quality and Ecosystems Modeling》2000,1(1-4):193-222
Two-dimensional, vertically-averaged hydrodynamic and sediment transport models were developed and applied as part of a PCB fate and transport modeling study of Thompson Island Pool (TIP), Upper Hudson River. Mechanistic formulations were used to simulate cohesive and non-cohesive suspended load transport; site-specific data were extensively used to determine model inputs. This modeling approach is compared and contrasted to non-mechanistic solids transport sub-models used in other contaminant fate studies. A minimum number of model parameters were adjusted to calibrate the sediment transport model using data collected during the 1994 spring flood. The model was validated during the 1997 spring flood and for a 22-year (1977–1998) period. Successful calibration and validation of the model showed that: (1) deposition and resuspension processes were realistically and accurately formulated in the model; (2) the model is an effective diagnostic tool for quantitatively evaluating net deposition and erosion from various areas of TIP; and (3) sediment transport results can be coupled with a PCB fate model with a high degree of confidence. 相似文献
17.
随着时间的推移和环境条件的缓慢变化，地震计各部件的性能参数会有所改变，及时了解这种变化并加以控制和调整，有助于提高地震计输出结果的可信度．所以，一台地震计无论在交付使用前，还是在使用过程中，都需要进行标定．目前，比较常用的标定方法有方波电流标定和正弦电流标定．本文从系统分析的角度出发，在分析得到地震计传递函数的基础上，将方波电流标定和正弦电流标定过程进行理论抽象，进而在复频域对两种电流标定过程进行仿真推导；并在此基础上，讨论了方波电流标定输出曲线与地震计固有参数之间以及正弦电流标定的稳态输出与标定电流之间的关系，并且论述了两组特定频率正弦电流的标定输出之间的关系．最后，作为理论分析在实践中的具体应用，给出了两种电流标定过程在实际工作中的应用方法．本文旨在阐明两种常用的电流标定方法的物理意义，对地震计的调试及应用有积极的参考作用． 相似文献
18.
IntroductionWith the time passing by and the environment changing, the characteristics of the components in a seismometer may change a little to some extent because of some certain reasons. Therefore the reliability of a sensor(s output may lower the reliability and a wrong result may also be produced if these changes are not realized and controlled or adjusted in time. Hence, the seismometers must be calibrated either before leaving factory or in use, so as to check the parameters and the cha… 相似文献
19.