共查询到20条相似文献，搜索用时 140 毫秒
1.
2.
在收集了沈阳及其附近地区 (12 1°30′～ 12 4°30′E ,4 1°～ 4 3°N)已有地震震源机制解成果的基础上 ,利用MAPSIS系统提供的P波初动求解方法 ,求解了 1974年 12月～ 2 0 0 1年 12月期间 ,该区域小震复合震源机制解 (平均解 )。结果表明 ,研究区主压应力轴P轴集中分布在NEE SWW方向 ,主张应力轴T轴集中分布在NNW SSE方向 ,这与本地区区域应力场的方向一致。 相似文献
3.
本文利用34°N以南,105°E以东大陆东南地区中强地震和小震的震源机制解结果,分析了震源机制解与可能的中强震发震构造及潜源区方向的关系.华南及邻区地震震源机制解节面走向和主应力轴方位分布具有明显的优势方向,大部分M≥4.0地震震源机制解中一个节面走向与主要构造走向及大多数潜源区方向对应较好,多数小震的节面走向和主应力轴方位综合统计结果也能为潜源区方向的判定提供比较可靠的依据.同时通过对1996年南黄海Ms6.1地震和1997年福建龙岩-永安Ms5.2地震的震源机制解结果进行分析,并结合区域地质构造、地震活动以及地震的等震线长轴展布、余震分布等资料,探讨了这两个地区潜源区的划分. 相似文献
4.
用震源机制解确定东北地区地壳应力场 总被引：4，自引：0，他引：4
利用中、强震震源机制资料和区域小震平均解给出了中国东北地区地壳应力场的分布。由多个震源机制的平均结果得到,东北南部地区(42°30’以南)主压应力方向为NE70°。东北中部地区(吉林省和黑龙江省东南部)主压应力方向近似NE100°,它与深源地震震源机制解P轴一致,可能该区应力场分布受深源地震影响,东北北部地区(黑龙江省和内蒙北部)主压应力方向为NE58°。东北地区浅源地震震源机制解P轴仰角大多数小于30°,表明该区以水平应力为主。由震源机制结果也讨论了中国东北地区地震断层活动状况。 相似文献
5.
6.
利用小震与强震震源机制解反演首都圈现今构造应力场 总被引：1，自引：0，他引：1
由于首都圈地区近年来布设了较为密集的地震台网,使得较小地震震源机制的求解成为可能。本文收集了首都圈地区近５０年来大震震源机制以及2002—2004年中小震震源机制解,采用对不同震级地震进行加权处理的网格搜索法将强震与小震结合对首都圈地区的现今地壳应力场进行反演。得到了较为精确的首都圈地区各区域的构造应力场。结果表明：北京张家口区,主压应力轴 Ｎ（４３°～８６°）Ｅ向;唐山及邻区,主压应力轴 Ｎ（３８°～８６°）Ｅ向;邢台区,主压应力轴 Ｎ（７９°～８１°）Ｅ向;本文反演结果与前人结果相似,表明了研究方法的正确性,并 揭 示 了现今首都圈地区应力场的整体一致性和分区差异,对解释首都圈地区的发震背景和地球动力学研究有一定的参考意义。 相似文献
7.
依据１９９０￣１９９６年期间发生在３０°￣３４°Ｎ，１１９．５°￣１２３°区域内１４５次中，小地震的３５０个初动符号，采用格点尝试法计算了南黄海６．１级地震前各年龄的小震综合节面解。结果表明：平均主应力轴方位由ＮＮＥ向ＮＥＥ方向偏移，矛盾符号比由高值趋向低值，反映了震前区内应力场的调整，集中和加强的过程。 相似文献
8.
本文利用宁夏及其邻区地震台网记录的18099个初动符号,以单个地震震源机制解和小震综合解的平均解,求得7个小区的区域构造应力场。全区主压应力场的平均方位为39°左右。各小区的平均主压应力方位为:西(吉)、海(原)、固(原)地区60°;银川平原及石咀山地区42°;石咀山以北、以西地区26°;(中)卫、(中)宁地区17°。各区均以来自西南方向的压应力为主。并认为当弱震活动带走向与主压应力方位成25°—30°夹角时,未来在这些条带上发生中强地震的可能性较大 相似文献
9.
10.
本文根据区域台网的观测资料,研究了云南省龙陵地区1971年至1980年的小震平均节面解的变化特点。结果表明:1.1971年2月至1975年11月,平均节面解的P轴方位同北东-南西向的区域应力场一致;2.大震前半年和大震后两天的P轴方位变为340°和176°,同主震的P轴相一致;3.强余震前的小震平均节面解同强余震的节面解相似;4.1977年至1980年3月,P波初动符号的矛盾比上升到30％以上,在此期间本区未发生5级以上的地震。最后讨论了本文所得的结果及其前兆意义。 相似文献
11.
Using the focal mechanism solutions of 24 moderately strong earthquakes in the northern Tianshan area, we carried out system cluster and stress field inversion analysis. The result indicates that, the focal mechanism solutions of moderately strong earthquakes are mainly dipslip reverse faulting in the northern Tianshan area. The principal rupture planes of earthquakes are NW-oriented. It is basically consistent with the strike of earthquake structure in its adjacent area. The direction of the principal compression stress P axis is nearly NS, and its inclination angle is small; while the inclination angle of the principal extensional stress T axis is large. It shows that the regional stress field is mainly controlled by the near-NS horizontal compressive stress. The direction of the maximum principal stress shows a gradation process of NNE-NS-NW from east to west. 相似文献
12.
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。 相似文献
13.
利用垂直向和波振幅比方法计算了2003年1月至2009年10月间宁夏北部及邻区的31个中小地震震源机制解,然后对计算所得的31个地震震源机制解进行系统聚类及应力场分析,并利用格点尝试法研究阿拉善区域（I区）和银川盆地及以北地区（II区）的平均震源机制解。结果表明：31个中小地震中走滑型地震占了近77％,显示出宁夏北部及邻近地区地震错动方式以近走滑为主;I区域地震产生的震源区构造变形是近南北向发生压缩,近东西向发生相对扩张;II区域构造应力场主压应力方向以水平作用为主,地震产生的震源区构造变形是北东向发生压缩,北西向发生相对扩张。 相似文献
14.
福建地区地震活动特征及区域应力场研究 总被引：3，自引：0，他引：3
本文通过对福建地区地质构造背景和地震活动性背景的分析,结合2007-2009年福建地区ML4.0级以上地震的活动概况,综合认为福建地区地震活动显著增强,这可能也预示着东南沿海整体地震活动水平的抬升。从7个ML4.0级以上地震的单个震源机制解结果分析认为,古田水口水库地区的地震表现为倾滑的正断层性质,其余地震的走滑性质更为明显;且各个地震的主压应力轴方向也存在一定的差异。利用多个地震的分区综合节面解结果分析认为,近期福建地区中等强度地震活动显示出的区域应力场方向以北西向为主,在不同区域主压应力的方向有所差异：福建中北部近海地区为北西向,中北部内陆地区为北北西-南南东向;福建南部及其近海地区为近东西向。主要受到菲律宾板块向西推挤作用的影响。 相似文献
15.
16.
钟继茂 《地震地磁观测与研究》2009,30(5):14-19
福建东南沿海地区曾发生多次强震。本文利用该区1604～1989年的47次地震的震源机制资料,采用力轴张量计算法推算了该区应力主轴方向,结果与其他文献给出的主压应力方向相符,即北西西-南东东向。在此基础上,得到最大剪切应力平面的走向和倾角。讨论了最大剪切应力平面与福建沿海近岸海域中存在的滨海断裂（牛山岛-兄弟屿断裂）的位置关系。从应力分析的角度初步探讨了滨海断裂带上地震活动由北向南增强的原因。 相似文献
17.
FOCAL MECHANISM SOLUTION AND TECTONIC STRESS FIELD CHARACTERISTICS OF THE MIDDLE TIANSHAN MOUNTAINS,XINJIANG 
下载免费PDF全文
下载免费PDF全文 ZHANG Zhi-bin ZHAO Xiao-cheng REN Lin 《地震地质》1979,42(3):595-611
The middle part of the Tianshan Mountains in Xinjiang is located in the north-central part of the Tianshan orogenic belt, between the rigid Tarim Basin and Junggar Basin. It is one of the regions with frequent deformation and strong earthquake activities. In this paper, 492 MS>2.5 earthquake events recorded by Xinjiang seismograph network from 2009 to 2018 were collected. The MS3.5 earthquake was taken as the boundary, the focal mechanism solutions of the earthquake events in this region were calculated by CAP method and FOCEMEC method respectively. At the same time the focal mechanism solutions of GCMT recorded historical earthquake events in this region were also collected. According to the global stress map classification standard, the moderate-strong earthquakes in the region are mainly dominated by thrust with a certain slip component, which are distributed near the combined belts of the Tarim Basin, Junggar Basin, Turpan Basin and Yili Basin with Tianshan Mountains. The thrust component decreases from south to north, while the strike-slip component increases. The spatial distribution characteristics of the tectonic stress field in the middle section of the Tianshan Mountains in Xinjiang are obtained by using the damped regional-scale stress field inversion method. The maximum principal compressive stress in axis the study area rotated in a fan shape from west to east, the NW direction in the western section gradually shifted to NE direction, its elevation angle is nearly horizontal, in the state of near horizontal compression. The minimum principal compressive stress axis is nearly EW, and the elevation angle is nearly vertical. Influenced by large fault zones such as Kashi River, Bolhinur, Nalati, Fukang, the southern margin of the Junggar and the north Beiluntai, the local regional stress field presents complex diversity. Under the influence of the northward extrusion of Pamir and Tarim blocks, the whole Tianshan is shortened by compression, but its shortening rate decreases from south to north and from west to east, the stress shape factor increases gradually from west to east, the intermediate principal compressive stress axis exhibits a change in compression to extension. There are some differences in the characteristics of tectonic stress field between the north and south of Tianshan Mountains. The regional maximum principal compressive stress axis is 15° north by east on the south side, while it is nearly NS on the north side. The deformation of the Tianshan Mountains and the two basins on both sides is obviously larger than that in the inside of the mountain. Changes in the crustal shortening rate caused by the rotation of the rigid Tarim block and Junggar block to the relatively soft Tianshan block, as well as the uplifts of Borokonu and Bogda Mountains, the comprehensive influence of the material westward expansion constitute the stress field distribution characteristics of the north and south sides of the middle section of Tianshan Mountains. The recent two MS6.6 earthquakes in the region caused the regional stress field to rotate counterclockwise. The post-earthquake stress field and the main source focal mechanism solution tend to be consistent. The seismic activity in the study area is week in the south and strong in the north. The focal depth is about 20km. Most strike-slip earthquakes occur near the junction belt of the Tianshan and Junggar Basin. 相似文献
18.
Using the seismic waveform data recorded by regional seismic network of Yunnan and Sichuan and the method of CAP, we calculate and obtain the focal mechanism of 268 earthquakes with the magnitude of ML≥4.0 occurring in Yunnan during Jan. 1999 to Aug. 2014; then, we analyze the types and the regional feature of the focal mechanism of earthquakes in Yunnan, on the basis of the focal mechanism of 109 earthquakes analyzed by Harvard University. Based on the data of the above focal mechanism solutions, we adopt the method of damped regional-scale stress inversion to calculate the best-fitting tectonic stress tensor of every grid in Yunnan; and adopt the method of maximum principal stress to calculate the direction of maximum horizontal principal stress in Yunnan. The result shows that: (1)the strike-slip type is the most principal type of the earthquake focus in the study area and the second is the normal faulting type; while, the reverse-fault type is relatively small. The spatial distribution of focal mechanism is obvious. This reflects that the dynamic source and acting force are different in different parts of the study area. (2)The direction of the stress field in Yunnan shows a certain spatial continuity. Maximum horizontal principal compressive stress is mainly clockwise from north to south and counterclockwise from the west to the east. The direction of stress field shows inhomogeneity in space. There exist two stress conversion zones respectively in EW and NS direction. The inversion result of stress field shows that the stress field in Yunnan is complex and the principal stress direction changes greatly; and there are obvious differences in different regions. 相似文献
19.
20.
Zhou Cuiying 《中国地震研究》2005,19(4):442-457
INTRODUCTIONThere exist many methods for studying recent crustal stress field.One of the most commonmethodsis to use focal mechanismsolution data of earthquakes to deduce the recent crustal stressfield.The method is simple and feasible and the data obtained is reliable.Yan Jiaquan,et al.(1979)usedthe method to study the recent tectonic stress field in China and its adjacent areas andgave a rough configuration and regional characteristics of the stress field.Li Qinzu(1980),WeiGuangxing,e… 相似文献