共查询到19条相似文献，搜索用时 93 毫秒
1.
通过系列模型试验，对透空水平板下波浪总上托力进行了研究，结果表明：平板下最大总上托力并不与最大冲击压强同步发生。为此，依据试验结果对波浪总上托力产生机理和影响因素进行详细分析，提出透空水平板波浪最大总上托力的计算公式，试验结果表明，该公式与实验值有着较好的一致性。 相似文献
2.
透空式水平板波浪上托力冲击压强试验研究 总被引：7，自引：1，他引：7
首先对以往波浪作用下透空式平板上托力研究进行了回顾，在此基础上，通过系列模型试验，对波浪上托力产生的机理进行了详细的分析和论述，认为透空式平板下波浪上托力主要由一个迅速上升的冲击压强和一个缓慢变化的压强构成，其中冲击压强通常远大于缓变压强，起主导作用，影响其大小的最直接因素为几何因素(即波浪冲击角)、动力因素(包括波高、波速等)和空气垫层因素，由此通过对各影响因素的分析，得到最大冲击压强计算公式，大量试验资料表明，该公式与实验值有着较好的一致性。 相似文献
3.
透空式水平板波浪上托力分布 总被引：9，自引：3，他引：9
通过系列模型试验，对波浪上托力沿板宽分布进行了详细分析，提出对于透空式平板结构，发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类，由此得到压强分布的计算公式。大量试验资料表明，该公式与实验值有着较好的一致性。 相似文献
4.
5.
透空式进海路是连接人工岛与陆岸的一种新型结构,其所受波浪力是工程设计中重点关注的问题。本文开展物理模型试验,通过改变水深、波高、桥面底高、桥面宽度等试验条件,研究透空式进海路波浪力的变化规律。试验测量透空式进海路上部结构的动水压强分布,分析得到结构的浮托力和水平波浪力。研究发现:透空式进海路上部结构波浪力的主要影响因素为桥面相对净空高度,在相对净空高度接近0时,桥面浮托力达到最大值。通过分析试验数据,并参照文献中的已有波浪力计算方法,建立透空式进海路上部结构浮托力和水平波浪力的计算公式,公式计算结果与试验结果符合较好,对透空式进海路工程设计具有重要指导意义。 相似文献
6.
波浪对透空外双壁筒柱的绕射 总被引：3，自引：2，他引：3
应用透空壁内流体速度与两壁间压力差成正比的线性模型，建立了外壁透空的双筒圆柱对波浪绕射的解析解。通过数值计算研究了外壁透空率的大小、内外柱半径之比等因素对桩柱上总波浪作用力和波面高度的影响。数值结果表明圆柱外壁透空系数的增加，将明显地降低圆柱周围的波浪高度和圆柱上的波浪力；内外柱径之比的大小对波浪力和波高的最大值无太大影响，而对波浪力剧烈衰减区的位置和波高的振荡周期有决定作用。 相似文献
7.
透空式防波堤周围的非线性波浪传播的数值模拟 总被引：1，自引：0，他引：1
对非线形波浪在透空式防波堤周围的波浪变形进行了数值模拟，在Boussinesq波浪方程中加入与透空建筑物有关的新的耗散项，从而界定了透空建筑物引起的部分反射和透射，波浪折射衍射的传播过程通过控制方程求解。波浪控制方程通过有限差分方法求解。模型应用于模拟波浪经过具有部分反射的群桩式透空结构，结果表明透空式防波堤可以有效地衰减波浪，是重力式结构的一种替代形式。 相似文献
8.
9.
对透空管组成的防波堤波浪反射、传递系数和堤上波浪力等水动力学特征进行研究.在对透空管非线性消耗波能机理分析基础上,采用一种简单的线性化方法,导出一组所有参数都是事先知道的、完全封闭的公式.波浪反射系数和堤上波压力与波浪力计算结果与试验吻合较好. 相似文献
10.
底部透空不透水建筑物是近海工程中的一种新型结构,与传统水工建筑物相比,其能灵活适应基床不发生变形、阻止波浪进入后方造成破坏。本文通过构建物理模型,在波浪水槽中进行试验,测试了底部透空不透水直立建筑物不规则波作用,得到了不同水深、相同波浪要素时,该型直立建筑物迎浪面和底面的水平总力最大时各测点正向波压力和负向波压力数据。对比分析了不同水深下底部透空不透水直立建筑物的水平总力及垂直力,总结了波峰和波谷作用下波浪力沿建筑物表面的分布规律,可为海岸工程结构设计提供依据。 相似文献
11.
Li Yanbao Song Reng
Associate Professor Dept. of Hydralulic Eng. Tianjin University Tainjin .
Professor Dept. of Hydralulic Eng. Tianjin University Tainjin 《中国海洋工程》1996,(2)
The analysis of the data of model tests of two large deep wharves and monographic experimental studies show that two aspects are to be improved so as to predict the wave uplift forces on the bottom of a circular cylinder. The first aspect is the uplift pressure distribution on the bottom, and the second is the correct determination of the phase for maximum horizontal wave forces. The second problem has been solved. Synthesizing the results of theoretical analysis and experiments, we suggest a diagram for the determination of the phase when the maximum horizontal wave force appears. On the basis-ef the diagram the simultaneous wave uplift forces can be obtained for the structural stability analysis. 相似文献
12.
斜坡上封闭式水平板波浪上托力分布试验研究 总被引：1，自引：1，他引：0
通过系列模型试验,对斜坡上尾部封闭式平板结构波浪上托力沿板宽分布进行了详细分析,提出板下最大冲击压强和最大总上托力并不一定同时出现,其分布形态可分为局部冲击型和均匀型。由于封闭空气层和底部斜坡影响,较大总上托力形成机理不尽一致,其均匀分布宽度也不相同,可分为气压型和反射型两类,由此提出分类标准,并分别得到压强分布的计算公式。 相似文献
13.
The superstructures of marine structures supported by the elastic legs and located in the splash zone will subject to violent wave slamming and vibrate consequently during storms. A series of model tests are carried out to investigate the wave impacting on the open structures supported elastically. Three kinds of models with different natural frequencies are designed. The characteristics of the wave pressures on the three models are compared. The durations of the uplift forces and the corresponding accelerations of the structure during wave impact are analyzed simultaneously. The distributions of the peak impact pressures on the subfaces of the plates with different supporting stiffness are given. The relationship between the uplift force on the three models and the relative clearance are obtained. The spectral properties of the slamming loads on the three different structures are compared. The experimental results indicate that the behaviors of the impact pressures, the uplift forces and accelerations of the plates with small natural frequencies are obviously different from those of the plates with larger natural frequencies within the range of the experimental parameters. 相似文献
14.
基于物理模型试验,考虑畸形波参数、相对板宽、相对波高等影响因素,就畸形波对平顶双层水平板防波堤作用进行研究。首先对畸形波作用下双层水平板的波浪力分布特征进行了讨论,然后就最大波动压强、结构最大总垂向力与不规则波作用进行了对比分析。结果表明,畸形波作用下,双层水平板最大波动压力出现在前端迎浪区域附近,向尾端逐渐递减。双层水平板4个受力面的压力分布不同且有相位差,4个受力面的最大波动压力时间差约在0.1Tp~0.4Tp范围内变化。与不规则波作用比较,畸形波作用没有显著改变波压包络分布特征,但增大了波压包络强度值。试验范围内,就最大总力而言,两者最大总浮托力比值在1.06~2.45间变化;向下的最大总垂向力比值在1.22~2.07之间变化;就波动压力而言,其增大的幅度与畸形波参数α1相关性最强,随α1的增大而增大,在α1=2.04~3.1试验范围内,畸形波作用时的最大压强比不规则波作用时可约增大20%~80%。就最大波吸力而言,两者的比值与畸形波参数α4相关性最强,随α4的增大而减小。在α4=0.62~0.75试验范围内,最大波吸力强度的比值在1.61~0.87范围内变化。当α4≤0.72时,畸形波作用时的最大波吸力大于不规则波作用时的最大波吸力;当α4 > 0.72时则刚好相反。 相似文献
15.
Giovanni Spagnoli Cristina de Hollanda Cavalcanti Tsuha 《Marine Georesources & Geotechnology》2020,38(9):1013-1036
AbstractHelical piles are used mainly to resist tension forces generated by uplift and overturning moments of various structures, therefore they have been suggested as a potential alternative to driven piles as offshore pile because they provide a large uplift capacity due to the anchor effect of the helix. To date no standards are available for the assessment of the use of helical piles in the offshore environment. State-of-the art installation and uplift capacity assessment is based on field onshore tests on small helical piles. The purpose of this review is to critically evaluate the current knowledge on helical piles considering uplift capacity, cyclic load, installation torque models and the parameters affecting the installation torque, to understand whether they can be considered for potential offshore applications. The paper could be of valuable interest for engineers and contractors involved in the offshore installation of piles. 相似文献
16.
H. Wibisono 《Ocean Engineering》1996,23(6):545-550
An alternative floating system for an offshore airport and other reclamation works is presented. It consists of precast boxes filled with FRP hollow spheres which sit on pile system. A top slab system consisting of precast and cast in situ concrete slabs will make the whole system monolithic. The light weight but strong spheres will enable the system to make use the uplift force from water. The precast boxes and slab system will transfer the difference between the gravity and uplift forces, as well as any lateral forces to the pile system. Finally, a proposed method of any lateral forces to the pile system. construction is also presented. 相似文献
17.
Uplift capacity of circular piles in sands is one important design parameter for many pile foundations supporting important structures subjected to tensile forces. Even though a number of formulas based on the limit equilibrium or semi-empirical methods are proposed to predict the uplift capacity of piles in sands, there is a major limitation of the methods in obtaining the accurate predictions. In this paper, the computational limit analysis is employed to investigate the uplift capacity of circular piles in sands. The effects of the important variables including pile length and diameter, soil friction angle and unit weight, and roughness factor at soil-pile interface are examined extensively using the dimensionless parameters while the predicted failure mechanisms associated with the parameters are discussed and compared. Approximate statistical design equations of the uplift capacity of circular piles in sands are developed based on the numerically derived solutions and the existing experimental data. It is found that the proposed design equations provide the most accurate prediction of the uplift capacity of circular piles in sands as compared to the existing formulas. 相似文献
18.
1 .IntroductionTraditionally ,thedesignofcoastalstructuresisbasedontheformulaedevelopedforhead onuni directionalwaves .However,wavesusuallyattackabreakwaterobliquely ,formingshort crestedwavesinfrontofthebreakwater.Ontheotherhand ,asthehumanactivityareaisspreading ,thewaterdepthattheconstructionsiteforbreakwatershasatendencytobecomelarge ,andsomebreakwatershavebeenconstructedinwaterareasdeeperthan 6 0minJapan (Tanimotoetal.,1 988) .Theseawaveismulti directionalandrandom ,especiallyindeepwater… 相似文献
19.
Boundary element method (BEM) is used to study wave pressure acting on a vertical quay, as well as the uplift forces on a submerged plate. The plate, placed in front of the quay, is bored with holes. The results are then compared with the case of a plate without any perforation.The results showed that: for q/h = 0.45, where q is the depth of submergence of the plate and h is water depth, wave pressure acting on the vertical quay is very similar for plates with or without borings. However, with q/h = 0.20, wave pressure on the quay is changed according to wave periods, widths of the plate, the distance of the plate away from the quay, as well as the ratio of the holes to the plates. Uplift forces exerted on the plate are indeed smaller for plates with borings than without, and decrease with increasing porous ratio. Furthermore, the uplift forces will be the same for the same porous ratios, regardless of these ratios being caused by a single or a double perforation. 相似文献