共查询到20条相似文献，搜索用时 31 毫秒
1.
The interaction of obliquely incident surface gravity waves with a vertical flexible permeable submerged membrane wave barrier is investigated in the context of three-dimensional linear water wave theory. From the general formulation of the submerged membrane barrier, the performance of bottom-standing, surface-piercing and fully extended membrane wave barriers are analyzed for various values of wave and structural parameters. The analytic solution of the physical problem is obtained using eigenfunction expansion method and a coupled boundary element-finite difference method has been used to get the numerical solution. In the boundary element method, since the boundary condition on the membrane barrier is not known a priori, the membrane response and velocity potentials are solved simultaneously using appropriate discretization with the help of finite difference scheme. The convergence of the analytic and numerical solution techniques is discussed. The study reveals that for suitable combination of wave and structural parameters, approximately (45–50)% incident wave energy can be dissipated irrespective of membrane barrier configurations. Further, in certain situations, nearly full wave reflection and zero transmission occur for all barrier configurations. The study will be useful in the design of flexible permeable membrane to act as an effective wave barrier for creation of tranquility zone in the marine environment. 相似文献
2.
Moo-Hyun Kim 《Applied Ocean Research》1992,14(6):353-370
The second-order difference-frequency wave forces on a large three-dimensional body in multi-directional waves are computed by the boundary integral equation method and the so-called FML formulation (assisting radiation potential method). Semi-analytic solutions for a bottom-mounted vertical circular cylinder are also developed to validate the numerical method. Difference-frequency wave loads on a bottom-mounted vertical cylinder and stationary four legs of the ISSC tension-leg platform (TLP) are presented for various combinations of incident wave frequencies and headings. These force quadratic transfer functions (QTF) can directly be used in studying slowly varying wave loads in irregular short-crested seas described by a particular directional spectrum. From our numerical results, it is seen that the slowly varying wave loads are in general very sensitive to the directional spreading function of the sea, and therefore wave directionality needs to be taken into account in relevant ocean engineering applications. It is also pointed out that the uni-directionality of the sea is not necessarily a conservative assumption when the second-order effects are concerned. 相似文献
3.
If the upstream boundary conditions are prescribed based on the incident wave only, the time-dependent numerical models cannot effectively simulate the wave field when the physical or spurious reflected waves become significant. This paper describes carefully an approach to specifying the incident wave boundary conditions combined with a set sponge layer to absorb the reflected waves towards the incident boundary. Incorporated into a time-dependent numerical model, whose governing equations are the Boussinesq-type ones, the effectiveness of the approach is studied in detail. The general boundary conditions, describing the down-wave boundary conditions are also generalized to the case of random waves. The numerical model is in detail examined. The test cases include both the normal one-dimensional incident regular or random waves and the two-dimensional oblique incident regular waves. The calculated results show that the present approach is effective on damping the reflected waves towards the incident wave boundary. 相似文献
4.
The vegetation has important impacts on coastal wave propagation. In the paper, the sensitivities of coastal wave attenuation due to vegetation to incident wave height, wave period and water depth, as well as vegetation configurations are numerically studied by using the fully nonlinear Boussinesq model. The model is based on the implementation of drag resistances due to vegetation in the fully nonlinear Boussinesq equation where the drag resistance is provided by the Morison’s formulation for rigid structure induced drag stresses. The model is firstly validated by comparing with the experimental results for wave propagation in vegetation zones. Subsequently, the model is used to simulate waves with different height, period propagating on vegetation zones with different water depth and vegetation configurations. The sensitivities of wave attenuation to incident wave height, wave period, water depth, as well as vegetation configurations are investigated based on the numerical results. The numerical results indicate that wave height attenuation due to vegetation is sensitive to incident wave height, wave period, water depth, as well as vegetation configurations, and attenuation ratio of wave height is increased monotonically with increases of incident wave height and decreases of water depth, while it is complex for wave period. Moreover, more vegetation segments can strengthen the interaction of vegetation and wave in a certain range. 相似文献
5.
《Coastal Engineering》2006,53(2-3):157-170
Influence of various factors affecting the longshore currents induced by obliquely incident random waves is examined through numerical calculation. Seven numerical models for random wave breaking process are found to yield large differences in the wave heights in the surf zone and longshore current velocities. The turbulent eddy viscosity formulation by Larson and Kraus [Larson, M. and Kraus, N.C. (1991): Numerical model of longshore current for bar and trough beaches, J. Waterway, Port, Coastal, and Ocean Eng., ASCE, 117 (4), pp. 326-347.] functions almost equal to that by Battjes [Battjes, J.A. (1975): Modeling of turbulence in the surf zone, Proc. Symp. Modeling Techniques, pp. 1050–1061.], but the formulation by Longuet-Higgins [Longuet-Higgins, M.S. (1970): Longshore current generated by obliquely incident sea waves, 1 and 2, J. Geophys. Res., 75 (33), pp. 6779–6801.] produces excessive diffusion of longshore currents into the offshore zone. The generation and decay process of the surface roller is indispensable in the longshore current analysis. The random wave transformation model called PEGBIS (Parabolic Equation with Gradational Breaker Index for Spectral waves) by Goda [Goda, Y. (2004): A 2-D random wave transformation model with gradational breaker index, Coastal Engineering Journal, JSCE and World Scientific, 46 (1), pp. 1–38.] produced good agreement with several laboratory and field data of longshore currents. 相似文献
6.
7.
Application of desingularized approach to water wave propagation over three-dimensional topography 总被引：1，自引：0，他引：1
A numerical approach based on desingularized boundary element method and mixed Eulerian–Lagrangian formulation [Zhang et al., 2006. Wave propagation in a fully nonlinear numerical wave tank: a desingularized method. Ocean Engineering 33, 2310–2331] is extended to solve the water wave propagation over arbitrary topography in a three-dimensional wave tank. A robust damping layer applicable for regular and irregular incident waves is employed to minimize the outgoing wave reflection back into the wave tank. Numerical results on the propagation of regular and irregular incident waves over the flat bottom and linear incident waves over an elliptical shoal show good concurrence with the corresponding analytical solutions and experimental data. 相似文献
8.
9.
A numerical irregular wave flume with active absorption of re-reflected waves is simulated by use of volume of fluid （VOF） method. An active ＇absorbing wave-maker based on linear wave theory is set on the left boundary of the wave flume. The progressive waves and the absorbing waves are generated simultaneously at the active wave generating-absorbing boundary. The absorbing waves are generated to eliminate the waves coming back to the generating boundary due to reflection from the outflow boundary and the structures. SIRW method proposed by Frigaard and Brorsen （1995） is used to separate the incident waves and reflected waves. The digital filters are designed based on the surface elevation signals of the two wave gauges. The corrected velocity of the wave-maker paddle is the output from the digital filter in real time. The numerical results of regular and irregular waves by the active absorbing-generating boundary are compared with the numerical results by the ordinary generating boundary to verify the performance of the active absorbing-generator boundary. The differences between the initial incident waves and the estimated incident waves are analyzed. 相似文献
10.
Numerical calculation of forces induced by short-crested waves on a vertical cylinder of arbitrary cross-section 总被引：1，自引：0，他引：1
Most off-shore oil platforms are supported by vertical cylinders extending to the ocean floor. An important problem in off-shore engineering is the calculation of the wave loading exerted on these vertical cylinders. Analytical solutions have been found for the case of plane incident waves incident on a circular cylinder by MacCamy and Fuchs [(1954), Wave forces on piles: a diffraction theory. U.S. Army Corps of Engineering, Beach Erosion Board, Technical Memorandum No. 69] and also for short-crested waves incident on a circular cylinder by Zhu [(1993), Diffraction of short-crested waves around a circular cylinder. Ocean Engng 20, 389–407]. However, for a cylinder of arbitrary cross-section, no analytic solutions currently exist. Au and Brebbia [(1983), Diffraction of water waves for vertical cylinders using boundary elements. Appl. Math. Modelling 7, 106–114] proposed an efficient numerical approach to calculate the wave loads induced by plane waves on vertical cylinders by using the boundary element method. However, wind-generated waves are better modelled by short-crested waves. Whether or not these short-crested waves can induce larger wave forces on a structure is of great concern to ocean engineers. In this paper wave loads, induced by short-crested incident waves, on a vertical cylinder of arbitrary cross-section are discussed. For a cylinder of certain cross-section, the wave loads induced by short-crested waves can be larger than those induced by plane waves with the same total wave number. 相似文献
11.
Due to their capability of correctly representing wave characteristics, the number of numerical models based on Navier–Stokes equation (NSE) models has recently increased remarkably. One of the key challenges of this type of wave model, however, is to minimize the wave re-reflection from the incident boundary. Many numerical techniques have been developed to deal with this problem, and previous studies have reported on internal wave makers that employ NSE. Research on generation and transformation of irregular waves using a three-dimensional NSE model, however, has begun very recently, and few studies have yet been reported. In this study, a three-dimensional numerical model was applied to generate irregular waves, and transformation of irregular waves was simulated in a numerical wave tank. The model was first verified by applying it to simple numerical tests in two dimensions. The model was then used to generate directional monochromatic and irregular waves in three dimensions. The numerical results were compared with the analytical solutions, and good agreement was observed. Finally, the model was applied to simulate the transformation of irregular waves over an uneven bottom geometry in a wave tank. 相似文献
12.
In this paper the aim is to investigate whether there are differences between the dispersion and non-dispersion solutions on tsunami propagation. For this purpose, two numerical models of tsunami propagation are compared. One of these numerical models is a nondispersive model that uses Saint Venant equations and the other is a dispersive model that uses Boussinesq equations. The tsunamis resulting from a submarine mass failure (SMF) which is settled at the bottom of the north eastern Sea of Marmara are examined. An analytical solution considering wave dispersion is developed for obtaining near-field tsunami amplitudes above the submarine mass failure. Numerical modeling is used at the sea surface from the common boundary called as liquid boundary with incident waves up to the coastal regions to get the tsunami amplitudes. The output of the analytical model is taken as the disturbances for the numerical method. In the numerical solutions TELEMAC-2D software system is used for both dispersive and nondispersive modeling. The results of the dispersive and nondispersive models are compared to each other. Both temporal and spatial differences in the amplitudes and wave shapes are examined. The obtained results demonstrate that there are no noticeable differences between the dispersion and non-dispersion solutions except some special cases and some special landslide velocities. 相似文献
13.
The problem of wave propagation in a fully nonlinear numerical wave tank is studied using desingularized boundary integral equation method coupled with mixed Eulerian–Lagrangian formulation. The present method is employed to solve the potential flow boundary value problem at each time step. The fourth-order predictor–corrector Adams–Bashforth–Moulton scheme is used for the time-stepping integration of the free surface boundary conditions. A damping layer near the end-wall of wave tank is added to absorb the outgoing waves with as little wave reflection back into the wave tank as possible. The saw-tooth instability is overcome via a five-point Chebyshev smoothing scheme. The model is applied to several wave propagations including solitary, irregular and random incident waves. 相似文献
14.
Tayeb Sadeghifar Maryam Nouri Motlagh Massoud Torabi Azad Mahdi Mohammad Mahdizadeh 《Marine Geodesy》2017,40(6):454-465
The prediction of wave parameters has a great significance in the coastal and offshore engineering. For this purpose, several models and approaches have been proposed to predict wave parameters, such as empirical, soft computing, and numerical based approaches. Recently, soft computing techniques such as recurrent neural networks (RNN) have been used to develop sea wave prediction models. In this study, the RNN for wave prediction based on the data gathered and the measurement of the sea waves in the Caspian Sea, in the north of Iran is used for this study. The efficiency of RNNs for 3, 6, and 12 hourly and diurnal wave prediction using correlation coefficients is calculated to be 0.96, 0.90, 0.87, and 0.73, respectively. This indicates that wave prediction by using RNNs yields better results than the previous neural network approaches. 相似文献
15.
16.
1 Introduction A vertical wall is one of the typical maritime sheltering structures in the coastal region, which is mainly subjected to wave forces. It has been a com- mon engineering assumption adopted for design pur- poses that normally incident wave fo… 相似文献
17.
TenCate J.A. Muir T.G. Caiti A. Kristensen A. Manning J.F. Shooter J.A. Koch R.A. Michelozzi E. 《Oceanic Engineering, IEEE Journal of》1995,20(4):300-310
The problem of locating very low frequency sound sources in shallow water is made difficult by the interaction of propagating acoustic waves with the sea floor. Slow wave speeds and the attendant short wavelengths suggest that low frequency beamforming and source localization with sea floor geophones can be accomplished with relatively small arrays when compared with hydrophone arrays in the water column. To test the feasibility of this approach, experiments were carried out in the shallow water of the Malta Channel of the Straits of Sicily where the Scholte wave speed was some 10 to 20 times slower that the speed of sound in water. A linear array of ten vertically gimballed geophones was deployed and measurements were made on propagating seismic wave fields generated by explosive shots. The resulting directivities, beam patterns, and sidelobe characteristics are in excellent agreement with array theory, which suggests that coherent processing is a viable technique on which to base new applications for seismic arrays on the sea floor. Supporting materials on the geophysics of Scholte waves and calculations of the wave field at the site are presented 相似文献
18.
The design of deep water offshore platforms requires the analysis of wave-structure interaction phenomena which have not been as critical for shallower water platform designs. In the case of tension leg platforms (TLPs) interaction phenomena such as wave run-up on the vertical legs and the amplification of the waves beneath the deck are major design considerations. The research investigation reported here focuses on a series of small scale wave tank tests on four column TLP models examining these phenomena. The role of vertical leg spacing and comparative tests of the TLP models with and without pontoons was investigated. As the vertical legs were moved closer an increase in wave run-up and a shifting of the incident wave period corresponding to the maximum wave upwelling were noted. Comparisons with wave measurements for single cylinders from previous experimental studies and the TLP configurations used in this study are presented. A design formula for estimating wave run-up on TLPs is suggested based upon these experiments. The wave run-up on a leg directly in the wake of another leg is presented. A comparison of the wave upwelling measurements with previously published numerical results are discussed. A wave uplift force model which allows for the inclusion of the experimentally obtained wave upwelling measurements is presented and discussed with regard to the design specification of platform deck elevation. 相似文献
19.
《Coastal Engineering》1999,36(1):59-85
Simple theoretical models to determine the equilibrium profile shape under breaking and non-breaking waves are presented. For the case of breaking waves, it is assumed that the seaward transport in the undertow is locally balanced by a net vertical sedimentation, so that no bottom changes occur at equilibrium. The parameterization of the water and sediment flux in the surf zone yields a power curve for the equilibrium profile with a power of 2/3, which is in agreement with previous field investigations on surf zone profile shapes. Three different models were developed to derive the profile shape under non-breaking waves, namely (1) a variational formulation where the wave energy dissipation in the bottom boundary layer is minimized over the part of the profile affected by non-breaking waves, (2) an integration of a small-scale sediment transport formula over a wave period where the slope conditions that yield zero net transport determine equilibrium, and (3) a conceptual formulation of mechanisms for onshore and offshore sediment transport where a balance between the mechanisms defines equilibrium conditions. All three models produced equilibrium profile shapes of power-type with the power typically in the range 0.15–0.30. Comparison with field data supported the results obtained indicating different powers for the equilibrium profile shape under breaking and non-breaking waves. 相似文献
20.
A mathematical model has been developed to analyze the influence of extreme water waves over multiconnected regions in Visakhapatnam Port, India by considering an average water depth in each multiconnected regions. In addition, partial reflection of incident waves on coastal boundary is also considered. The domain of interest is divided mainly into two regions, i.e., open sea region and harbor region namely as Region-I and Region-II, respectively. Further, Region-II is divided into multiple connected regions. The 2-D boundary element method (BEM) including the Chebyshev point discretization is utilized to solve the Helmholtz equation in each region separately to determine the wave amplification. The numerical convergence is performed to obtain the optimum numerical accuracy and the validation of the current numerical approach is also conducted by comparing the simulation results with existing studies. The four key spots based on the moored ship locations in Visakhapatnam Port are identified to perform the numerical simulation. The wave amplification at these locations is estimated for monochromatic incident waves, considering approximate water depth and different reflection coefficients on the wall of port under the resonance conditions. In addition, wave field analysis inside the Visakhapatnam Port is also conducted to understand resonance conditions. The current numerical model provides an efficient tool to analyze the amplification on any realistic ports or harbors.
相似文献