共查询到20条相似文献，搜索用时 421 毫秒
1.
以相山巴泉隐爆角砾岩型铀矿床为研究对象,介绍该矿床的成矿地质背景及矿床地质特征,探讨隐爆角砾岩的形成过程及铀成矿过程。相山巴泉隐爆角砾岩受火山机构制约,成岩成矿作用与火山—次火山作用密切相关。铀矿化与隐爆角砾岩(筒)在时空上具有密切关系,矿化严格受岩筒控制,且产于岩筒内及其接触带附近裂隙中。矿化与岩筒范围、形态相吻合,矿体与岩筒产状相同。矿化富集程度与岩筒内的角砾大小密切相关,角砾愈小矿化愈富集。矿化在水平和垂直方向上也呈规律性变化,自隐爆角砾岩(筒)中心至边缘、从顶部至底部,铀矿品位逐渐降低。 相似文献
2.
宁德九曲岭含铜钨矿隐爆角砾岩筒出露于花岗闪长岩体之中,未见明显断裂控制。隐爆角砾成分与胶结物成分复杂,矿化蚀变具明显的分带特征,其中铜钨矿贮存于黄铁矿一绿泥石和石英一绿泥石带中。外围尚发现2个大型隐爆角砾岩筒,通过研究九曲岭铜钨矿角砾岩筒特征,对指导深部与外围找矿具有重要找矿意义。 相似文献
3.
4.
新疆哈密坡子泉地区首次发现的隐爆角砾岩筒处在塔里木板块北缘活动带卡瓦布拉克微板块之上,基底地层为前寒武系,盖层主要为石炭系,受ＮＥ向断裂带控制。隐爆角砾岩特征及产出环境相似于金伯利岩。 相似文献
5.
6.
山西灵丘支家地铅锌银矿隐爆角砾岩筒的岩相分带性研究及其勘查意义 总被引：2，自引：0，他引：2
隐爆角砾岩简长期以来一直受到人们的重视,但是对于岩筒的通道相特征以及垂向分带则少有研究.本文通过对山西灵丘支家地铅锌银矿床详细的野外和岩相学研究工作,发现了含矿隐爆角砾岩筒的通道相,其多发育在石英斑岩-石英斑岩角砾岩小岩株的顶部,总体形态为角砾岩筒根部发育的间隔式分支脉状矿化蚀变带,岩体内反映为细脉中心向两侧呈弥散密集浸染状矿化蚀变的隐蔽裂隙脉,对隐爆角砾岩筒的形成机制具有重要的意义.进而根据含矿角砾岩筒不同部位的矿化类型,角砾的成分、形状、大小、可拼合性等特征,将其在垂向上由上而下分为4个相带:①裂隙相、②震碎相、③爆破相、④通道相.各相带的角砾成分、大小、形态、胶结物特征和矿化蚀变等呈规律性变化,震碎相和爆破相是最主要的赋矿部位,沿含矿角砾岩筒的通道相有可能追索到深部的斑岩型矿化.含矿角砾岩筒形成机制与岩浆上侵中第二次沸腾过程中岩浆热液释放有关. 相似文献
7.
安徽宣城茶亭铜金矿床是近年来在长江中下游浅覆盖区之南陵—宣城中—新生代火山—沉积盆地中新发现的一个大型矿床。文章以赋矿石英闪长玢岩侵入体内发育的隐爆角砾岩为对象，通过详细的钻孔岩心观察和显微岩相学研究，确定其地质特征并探讨其与成矿的关系。根据钻孔岩心观察确定的岩石构造特征及钻孔剖面圈定的角砾岩空间分布特征，茶亭铜金矿床发育的隐爆角砾岩呈上大下小的不规则筒状体，被隐伏的石英闪长玢岩侵入体包孕。根据角砾特征以及角砾间的裂隙和胶结物特征，可将隐爆角砾岩划分为隐爆浆屑角砾岩、隐爆热液角砾岩和隐爆破裂角砾岩三类，三类隐爆角砾岩空间上有规律地分布，以隐爆浆屑角砾岩为中心向外或向上依次过渡为隐爆热液角砾岩→隐爆破裂角砾岩→石英闪长玢岩。基于隐爆角砾岩与蚀变和矿化的关系推测，岩浆—气液隐蔽爆破作用所产生的大量裂隙为后期含矿岩浆热液和大气降水热液的运移、交代、混合乃至卸载、沉淀成矿提供了有利的构造空间。茶亭铜金矿床的矿体赋存于浅成斑岩侵入体中，其围岩蚀变类型与分带，以及矿化呈细粒浸染状和细脉—网脉状等地质特征显示其与斑岩型矿床极为相似，但矿化富集部位与隐爆角砾岩筒（体） 的一致，且矿床同时发育角砾状、脉状、团块状矿化，矿脉中发育热液硬石膏甚至形成硬石膏岩等地质特征又明显不同于斑岩型矿床。因此，文章将茶亭铜金矿床确定为一个与中酸性浅成斑岩侵入体密切相关的隐爆角砾岩型矿床。 相似文献
8.
香炉碗子金矿区分布的次火山岩是由花岗质岩浆沿东西向脆-韧性剪切带上升到地壳浅部隐爆而成,隐爆角砾岩体与霏细岩脉来自同一岩浆源,为同一岩浆活动不同演化阶段的产物,隐爆角砾岩体(脉)、霏细岩脉在时间上、空间上、成因上与金矿形成关系密切.稀土元素、微量元素、同位素等地球化学特征显示出成矿物质和成矿热液与隐爆角砾岩、霏细岩同源,成岩与成矿是同一岩浆作用不同阶段的产物.东西向脆-韧性剪切带内隐爆角砾岩体(脉)、霏细岩脉的存在是区内重要的找矿标志. 相似文献
9.
10.
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
15.
16.
17.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
18.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
19.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献