共查询到20条相似文献，搜索用时 62 毫秒
1.
塔吾尔别克-阿庇因迪斑岩型金矿特征 总被引：9，自引：3，他引：6
矿床的形成与矿区二长斑岩岩体有关.岩体内发育4组原生节理或裂隙带,这些节理或裂隙带控制了矿体的分布,特别是它们的交汇部位是成矿的良好部位.矿体形态为脉状、网脉状和透镜体状.有4种矿石类型:黄铁矿石英脉型;黄铁矿硅酸盐石英脉型;黄铁绢英岩型和细脉浸染型.矿床可以划分为2个成矿期:内生成矿期和表生成矿期.内生成矿期划分3个成矿阶段,第2成矿阶段是金矿主成矿阶段.矿物组合为黄铁矿、自然金、银金矿、石英、绿泥石、方解石、白云石、绢云母、白云母和重晶石.矿体的围岩蚀变主要为硅化、绢云母化、黄铁绢英岩化、绿泥石化、硅酸盐化.氢氧同位素、硫同位素以及流体包裹体的研究表明,成矿热液为岩浆热液和大气降水的混合体.成矿热液温度为130℃,成矿压力为22MPa,盐度1.03%,氧逸度-36.7~-38.8,pH=5.8~8.8.成矿流体早期显酸性,晚期显碱性.认为该矿床为浅成低温、低盐度流体成矿,属于次火山斑岩型金矿. 相似文献
2.
内蒙古干珠尔善德银铅锌矿床的短波红外光谱研究 总被引：1，自引：0，他引：1
内蒙古干珠尔善德银铅锌矿床是一处构造裂隙充填型脉状矿床,其围岩蚀变作用强烈,伊利石-绢云母类蚀变矿物广泛发育于围岩中,与银铅锌矿化作用密切相关。对围岩开展短波红外光谱测量,可以计算蒙脱石-伊利石-绢云母类矿物的伊利石结晶度(SWIR-IC),从而定量地确定该类蚀变作用的强度。该方法有效性试验研究表明,SWIR-IC与(Pb+Zn)%的品位具有很好的正相关关系,即围岩的伊利石-绢云母化蚀变作用越强,铅锌矿化作用也越强。通过对干珠尔善德详查区进一步开展短波红外光谱测量,在地表圈出了5处规模较大的SWIR-IC异常(IC1~IC5),其中IC1和IC4异常与银铅锌矿化带的位置相一致,IC5则可以作为下一步找矿的靶区。在热液脉状银铅锌矿床的勘查工作中,对围岩开展系统的短波红外光谱测量工作,可以定量地显示伊利石-绢云母化蚀变的强度,指示热液活动中心,从而寻找银铅锌矿体的所在,但需同时确认绢云母是否为热液蚀变成因。 相似文献
3.
《地球化学》2016,(6)
红海VMS铜锌矿床位于新疆东天山大南湖-头苏泉岛弧带的卡拉塔格地区,矿床上部发育似层状块状硫化物矿体,下部为不整合的脉状-网脉状矿体,块状矿体上盘火山岩盖层中也发育少量铜矿化。本文在前人工作基础上,根据矿物交代次序、脉体穿插关系和矿物共生组合类型,精细划分了矿床的蚀变分带和成矿期次。矿床(含盖层)从浅到深依次发育绿泥石-钠长石-绢云母-碳酸盐化、绿帘石-绿泥石-钠长石-绢云母-碳酸盐化、石英-绢云母-黄铁矿化、块状硫化物矿体、绿泥石-黄铁矿±绢云母化和绿泥石-石英-绢云母化。红海矿床成矿过程可分为VMS成矿期、后期热液叠加期和表生期,其中VMS成矿期可细分为黄铁矿阶段、黄铜矿-闪锌矿阶段和重晶石阶段,后期热液叠加期可细分为钠长石化阶段、绿泥石-绿帘石阶段和石英-碳酸盐阶段。主矿化期及蚀变特征与典型VMS矿床类似,但同时还表现出许多海底交代作用的特征。后期热液在矿体上盘火山岩中所产生的绿帘石化、绿泥石化和绿帘石-石英-黄铜矿-斑铜矿脉、石英-碳酸盐脉等蚀变和矿化,与斑岩矿化系统的青磐岩化类似,表明红海矿床后期可能受到斑岩系统的叠加,矿区具有斑岩铜矿床的找矿潜力。 相似文献
4.
河台金矿是一个典型的与韧性剪切带有关的金矿床,也是目前粤西、桂东南已发现的最大的金矿床。为了给深边部的找矿提供科学依据,本文对河台金矿伽马能谱K异常进行了研究。河台金矿动力变质分异期、热液期与表生期生成的富钾矿物只有绢云母,表明本区引起伽马能谱K高异常的应为绢云母。这些绢云母可能成因于糜棱岩化过程与金-黄铁矿-石英热液蚀变过程中斜长石的绢云母化。其中,糜棱岩化过程引起的K高异常具有异常宽度小的特点,且具有指示糜棱岩带与矿体位置的意义。金-黄铁矿-石英阶段引起的K高异常具有异常宽度大的特点,且主要发育于糜棱带与不同岩性的接触带。伽马能谱K低异常则可能成因于热液成矿期中金-石英-多金属硫化物阶段的热液蚀变作用及低钾花岗伟晶岩脉的侵入。 相似文献
5.
河南嵩县庙岭金矿位于华北陆块南缘熊耳山—外方山地区。矿床赋存于中元古界熊耳群火山岩中近南北向断裂带内,矿体呈似层状、透镜状产出,矿石具浸染状、细网脉状构造和微细粒它形粒状晶粒结构、交代结构,围岩热液蚀变有硅化、钾长石化、绢云母化、黄铁矿化等,矿化具有多阶段的特点,属破碎带蚀变岩型金矿。成矿热液蚀变矿物钾长石Ar-Ar法测年的结果：坪年龄为121.6Ma±1.2Ma,等时线年龄为117.0Ma±1.6Ma,表明矿床形成于早白垩世,与熊耳山地区祁雨沟、瑶沟等金矿床形成于同一时期,属与早白垩世构造-岩浆-流体活动有关的产物。 相似文献
6.
河南嵩县庙岭金矿位于华北陆块南缘熊耳山—外方山地区。矿床赋存于中元古界熊耳群火山岩中近南北向断裂带内,矿体呈似层状、透镜状产出,矿石具浸染状、细网脉状构造和微细粒它形粒状晶粒结构、交代结构,围岩热液蚀变有硅化、钾长石化、绢云母化、黄铁矿化等,矿化具有多阶段的特点,属破碎带蚀变岩型金矿。成矿热液蚀变矿物钾长石Ar-Ar法测年的结果：坪年龄为121.6Ma±1.2Ma,等时线年龄为117.0Ma±1.6Ma,表明矿床形成于早白垩世,与熊耳山地区祁雨沟、瑶沟等金矿床形成于同一时期,属与早白垩世构造-岩浆-流体活动有关的产物。 相似文献
7.
8.
9.
德兴铜厂斑岩铜(钼金)矿床蚀变-矿化系统流体演化:H-O同位素制约 总被引：2，自引：0，他引：2
江西铜厂斑岩铜(钼金)矿床是德兴斑岩矿集区最大的矿床.文章根据铜厂矿床发育的钾硅酸盐化、绢英岩化、青磐岩化蚀变组合特征,和已厘定的铜厂矿床脉体类型,选取代表不同蚀变矿化阶段的石英、黑云母、绢云母及绿泥石等,进行单矿物的H、O同位素测试.石英和黑云母单矿物O同位素,与石英、黑云母平衡流体的δ 18O 值和δD值联合示踪结果显示,铜厂矿床早期A脉(不规则疙瘩状A1脉、石英-黑云母A2脉和石英-磁铁矿A4脉)和中期B脉(矿物组合为石英-黄铁矿+黄铜矿±辉钼矿±斑铜矿)形成时,成矿热液均为岩浆流体来源,但B脉可能混入了少量大气降水;晚期低温D脉和碳酸岩脉(180～200℃)的成矿热液全部为大气降水来源.斑晶黑云母平衡水的δ 18O和δD值变化范围较大表明,黑云母形成时的热液系统主要为岩浆水,局部受区域变质水和大气降水的混染,也可能与少量黑云母斑晶受到后期绿泥石化、水云母化蚀变有关.绿泥石蚀变主要由岩浆流体作用形成,但混入了一些大气降水,导致其δ 18O值少量降低.绢云母平衡的水的δ18O值和δD值(4.6‰和-19.4‰)表明,绢云母是大气降水与千枚岩共同作用的结果.总体来说,铜厂矿床钾硅酸盐化、绿泥石化蚀变,以及钾硅酸盐化阶段形成的A脉和B脉,均由岩浆流体作用引起,大气降水在绿泥石化阶段进入蚀变-矿化系统,而绢云母化、晚期低温D脉和碳酸盐脉均是大气降水作用的产物. 相似文献
10.
排山楼地区变质作用的主要因素为热量(约600℃)、化学活动流体和压力(地压应力和挤压应力).地壳震动是造成本区造山作用的原因.这种现象与板块构造理论相吻合.矿物分异作用序列为:首先,受火成侵入活动的影响,产生片麻岩、糜棱岩、花岗岩;然后,经历地压和挤压的作用;最后,发生各种类型蚀变作用,包括绢云母化、硅化、碳酸岩化、方解石化、绿泥石化、脱氧作用等.排山楼金矿成矿模式可概述如下:a)成矿作用为热液蚀变型,矿床赋存在太古宙变质岩大型韧性剪切带中;b)矿体产于裂隙中;c)矿体形态与岩脉和细脉形态一致;d)围岩经历了强烈的蚀变作用;e)黄铁矿是最重要的富金矿物,热液流体来源于侵入体,在流经破碎带和裂隙带后,在围岩中沉积黄铁矿.主要岩石类型有花岗岩、角闪岩、片岩、片麻岩和糜棱岩.区内广泛发育青盘岩化、泥化和绢云母化蚀变作用.主要蚀变矿物有石英、黄铁矿、白云母、绢云母、绿帘石、黑云母、微斜长石、方解石、角闪石、云母和锆石.矿体主要赋存在花岗岩和片麻岩中.主要蚀变作用为绢云母化、黑云母化、硅化和方解石化.蚀变过程中,铁氧化物(铁帽、云母)覆于贫硫酸盐矿石表面.蚀变类型有青盘岩化(黏土)、泥化和绢云母化.通常,氧化铁与黏土矿物的混合影响卫星影像中光谱的反射.利用遥感技术方法,适于这类矿床的进一步预测研究. 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
15.
16.
17.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
18.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
19.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献