共查询到20条相似文献，搜索用时 640 毫秒
1.
为探讨湘东锡田地区晚侏罗世花岗质岩浆作用及其与成矿作用的相互关系,本文对锡田垄上黑云母二长花岗岩进行了矿物学和LA-ICP-MS锆石U-Pb年代学及Hf同位素组成研究。锆石U-Pb年代学研究表明花岗岩形成于～150 Ma,为晚侏罗世,与锡田钨锡多金属矿床具有一致的形成时代。锆石原位Hf同位素的研究结果表明锡田晚侏罗世花岗岩主要来源于古老地壳物质的重熔,同时有少量地幔物质的加入。花岗岩黑云母的化学成分特征显示其具有高的含铁指数和低的氧逸度,暗示其有利于钨锡成矿。综合相关区域地质资料,表明锡田晚侏罗世花岗岩的形成与中生代时期华南发生的岩石圈伸展与减薄作用有关,本区晚侏罗世花岗质岩浆活动与区内钨锡多金属矿床的形成具有密切联系。 相似文献
2.
东昆仑造山带祁漫塔格地区白干湖含钨锡矿花岗岩:岩石学、年代学、地球化学及岩石成因 总被引：13，自引：0，他引：13
白干湖钨锡矿床发育大量与成矿关系密切的花岗岩.LA-ICPMS锆石U-Pb年代学研究表明含矿更长花岗岩形成于(429.5±3.2) Ma,二长花岗岩形成于(430.5±1.2) Ma.锆石Hf同位素组成表明,二长花岗岩的εHf(t)为-2.31～5.57,T2DM主体为1188～1390Ma;含矿更长花岗岩εHf(t)... 相似文献
3.
锡钨多金属矿化多与Li-F碱长花岗岩有关,其岩浆演化晚期常发生较大规模的液态分异作用。广西栗木锡钨铌钽矿与成矿有关的岩体包括肉红色中粒碱长花岗岩以及顶部的白色细粒碱长花岗岩。矿化产于碱长花岗岩顶部附近,主要矿化类型包括花岗岩型钨锡铌钽矿化、似伟晶岩型钨矿化、长石石英脉型钨矿化和石英脉型钨锡矿化。碱长花岗岩中存在大量岩浆液态不混溶现象,包括矿囊、似伟晶岩和细晶岩等。地质地球化学研究发现,岩浆液态不混溶作用贯穿于栗木碱长花岗岩分异演化的全过程,矿囊代表岩体中富含钨锡和挥发份的岩浆,岩体顶部的似伟晶岩和细晶岩是碱长花岗岩岩浆分异的结果。在岩浆液态不混溶作用过程中,W、Sn、Nb、Ta等成矿元素以及挥发份不断富集,形成岩浆岩型、长英质脉型以及石英脉型矿化。不同类型的矿化对应岩浆液态不混溶作用的不同阶段,由此建立了栗木矿床岩浆液态不混溶的成矿演化模型。 相似文献
4.
赣中乐安麻鸡嶂地区产出了一些与钨、锡多金属矿化有关的细粒二云母碱长花岗岩侵人体,统称为山心单元。本文通过对山心单元进行锆石LA-ICP-MS U-Pb测年,获得其成岩年龄为152.5±1_3 Ma,属晚侏罗世岩浆活动的产物。矿物化学分析表明,山心单元中的云母属铁白云母(褐黑色云母)和白云母,长石为钠长石和正长石。山心单元花岗岩富硅富碱过铝,贫钙、镁,富集Rb、Th、Ta等,Ga/Al值较高,亏损Sr、Ba、Ti、P、Eu等元素,稀土配分曲线为"海鸥型",ε_(Nd)(t)值为-8.9,T_(2DM)=1662 Ma,地球化学特征与南岭地区铝质A型花岗岩相似,可能是高分异的铝质A型花岗岩。其高的Rb/Sr、Rb/Ba值,低的Nb/Ta、Zr/Hf、K/Rb值暗示了岩浆演化过程中有挥发分流体参与,并经历了强烈的分异作用,是岩浆演化后期的产物。该岩体可能形成于后造山拉张构造背景下,主要来源于地壳物质的部分熔融,可能有少量地幔物质的参与。山心花岗岩的含钨特性及其与钨锡成矿时代的一致性,显示其与钨锡成矿有关,而山心花岗岩的高分异属性及大量伟晶岩、石英脉和云英岩脉的发育,暗示深部可能存在大的隐伏岩体,具有良好的钨锡成矿潜力。 相似文献
5.
利用SHRIMP锆石U-Pb定年方法测得赣南柯树岭-仙鹅塘云英岩-石英脉型钨锡多金属矿床柯树岭区段钻孔中的新鲜花岗岩的成岩年龄为251.5±6.6Ma和202±15Ma。柯树岭花岗岩属过铝质高钾钙碱性花岗岩;ΣREE较低(<80.16×10-6),与华南典型含铌钽矿化花岗岩ΣREE含量低的特点一致,是岩浆高度分异演化的产物;锆石εHf(t)值为-14.5～-1.3,Hf两阶段模式年龄TDM2为3.21～2.55Ga,表明该岩体起源于太古宙地壳物质的部分熔融;Al/(Mg+Fe)-Ca/(Mg+Fe)图解表明该岩体主要来源于变质杂砂岩和变质泥岩的部分熔融,但也混有一些变质玄武岩和变质英云闪长岩,两个正的εHf(t)值(+2.4和+3.0)显示岩浆在上升侵位过程中捕获了幔源残留锆石。包括柯树岭在内的华南印支期花岗岩是于后碰撞或碰撞晚期,在以被动侵位机制为主和挤压应力松弛的间隙环境中侵位的,为加厚地壳局部熔融的产物。 相似文献
6.
云南腾冲大松坡锡矿成矿年代学研究:锆石 LA-ICP-MS U-Pb年龄和锡石LA-MC-ICP-MS U-Pb年龄证据 总被引：11，自引：7，他引：4
大松坡锡矿床是三江特提斯成矿域腾冲-梁河锡-钨多金属矿带内的典型锡矿床之一,与古永岩基有密切的成生联系.本文利用LA-ICP-MS锆石U-Pb定年手段对大松坡锡矿床小龙河含锡黑云母花岗岩和二长花岗岩进行制约,两件黑云母花岗岩样品分析结果分别为70.3±3.2Ma和75.3±4.2Ma,一件二长花岗岩样品结果为71.5±2.1Ma,代表了岩浆结晶年龄.LA-MC-ICP-MS U-Pb方法直接对锡石进行年龄测试在国内外研究报道尚少,本文首次对该矿床云英岩型锡矿石中锡石进行定年尝试,结果为75.5±2.6Ma,与岩体年龄在误差范围内一致.小龙河锡矿床含锡岩体与古永岩基年龄一致,表明该含锡岩体可能是古永岩基的一部分.大松坡锡矿床的成矿年龄与含锡岩体年龄一致,表明二者同时形成,共系新特提斯洋俯冲构造背景的产物. 相似文献
7.
本文对清水泉复式杂岩体进行SHRIMP锆石U-Pb测年,获得二长花岗岩形成时代为314.4±4.7 Ma,含黑云母花岗岩形成时代为311.7±4.1 Ma,英云闪长岩形成时代为314.0±4.0 Ma,加之前人在该地区花岗闪长岩中获得Rb-Sr全岩等时线年龄(277.71±13.5 Ma),限定清水泉复式杂岩体的主要侵位时代为晚石炭世至早二叠世,且至少存在两期岩浆;清水泉复式杂岩体微量元素与稀土元素特征表明岩体具有地壳重熔型花岗岩特征,为I型与A型过渡岩浆,形成于活动陆缘的后造山/火山弧环境,从而揭示在晚石炭世时,古红石山洋消减碰撞,之后进入后造山阶段。 相似文献
8.
湘南王仙岭花岗岩体的锆石U-Pb年代学、地球化学、锆石Hf同位素特征及其地质意义 总被引：13，自引：7，他引：6
湘南王仙岭岩体由主体电气石黑云母花岗岩和侵入其内部的黑云母二长花岗岩组成,LA-MC-ICPMS锆石U-Pb定年显示电气石黑云母花岗岩形成于印支期(235.0±1.3Ma),黑云母二长花岗岩形成于燕山期(155.9±1.0Ma),表明该岩体是两期岩浆活动的产物。这两期岩石均为高钾钙碱性系列,A/CNK值为1.07～1.66,属过铝-强过铝质花岗岩类。稀土元素显示LREE富集,HREE亏损,Eu负异常明显(0.01～0.38)的特征。早期电气石黑云母花岗岩和晚期黑云母二长花岗岩的εHf(t)值分别为-7.92～+4.61和-10.66～-5.35;两阶段Hf模式年龄(tDM2)分别为1758～967Ma和1875～1538Ma。两期花岗岩均来自于古中元古代地壳物质重熔,其中早期电气石黑云母花岗岩在侵位上升过程中捕获了部分幔源老锆石,成岩过程中有少量地幔物质参与,且其源区具有高εHf(t)值的特点。综合前人研究成果,本文认为华南中生代印支期和燕山期均有钨锡矿化作用,印支期花岗质岩浆形成于碰撞挤压作用间隙伸展环境,而燕山期花岗质岩浆可能形成于大陆边缘弧后伸展环境。 相似文献
9.
赣南鹅婆岩体位于南岭东西向构造岩浆带与武夷山北北东向构造带结合部位,地处于都—青塘古生代盆地西缘,出露面积达200 km2。岩体主体为黑云母二长花岗岩,其构造位置特殊,周边成矿条件有利,西侧银坑矿田内部和外围分别发育金银铅锌贵多金属矿和钨多金属矿。本文在岩体地质工作的基础上,应用激光剥蚀多接收器电感耦合等离子体质谱(LA-MC-ICP-MS)技术对鹅婆黑云母二长花岗岩进行了锆石U-Pb定年;结合元素地球化学数据讨论了其岩浆系列和岩石成因;并与区内成矿岩浆岩进行对比,探讨其成矿潜力。鹅婆花岗岩体的侵入年龄为(412.5±1.7)Ma,花岗岩中含富铝矿物,主量和微量元素地球化学显示其属于高钾钙碱性-钾玄岩系列,为强过铝质的S型花岗岩,是新元古代壳层沉积变质泥岩在加里东晚期重熔侵入的产物。与加里东期和燕山期成钨锡花岗岩的对比研究表明,鹅婆岩体在形成过程中发生了W、Sn等成矿元素的富集。本文研究结果一方面证明前人获得的全岩Rb-Sr等时线年龄(307 Ma)代表的是成岩期后所经历的一次地质事件;同时表明加里东期花岗岩也有钨锡矿成矿的潜力。 相似文献
10.
燕山期花岗岩是亚婆绿岩体重要组成部分，以往的研究主要通过全岩地球化学来约束其成因和岩浆来源，缺乏对岩体锆石的岩相学、微量元素地球化学研究。本文对亚婆绿岩体二长花岗岩开展锆石U-Pb年代学及微量元素和Hf同位素研究，约束其成岩时代，探讨岩体锆石成因及岩浆源区特征。锆石U-Pb定年显示亚婆绿岩体二长花岗岩侵位年龄为153.6±1.2Ma，属燕山早期岩浆活动的产物；其中锆石发育典型的振荡环带，具有明显的Ce正异常和Eu负异常，属岩浆锆石，形成于陆壳环境。结合亚婆绿岩体二长花岗岩的Lu-Hf同位素特征，认为其为壳源岩石重熔的产物，岩浆物质源于下地壳的改造、再循环。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
15.
16.
17.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
18.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
19.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献