多维地震作用下大跨空间结构的减震控制分析          下载免费PDF全文

赵祥  刘忠华  王社良  杨涛  展猛 《地震工程学报》2018,40(3):398-405

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。  相似文献   

磁流变阻尼器的半主动控制及实时混合模拟试验研究          下载免费PDF全文

李歆  吕西林  Shirley Dyke 《世界地震工程》2018,34(4):130-135

磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。  相似文献   

中国和欧盟阻尼器检测标准比较          下载免费PDF全文

鲁亮  赵菲  曹文清  苏磊  葛雪 《世界地震工程》2018,34(4):165-173

国内阻尼器工程应用越来越多,阻尼器生产和应用时需要进行型式检验和出厂检验。中国和欧盟均制定了阻尼器产品检验标准,但在检测参数、检测方法和数据处理等方面存在一些差异,有些参数的检测还存在一些困难和争议,通过比较研究,指出中欧阻尼器检测标准的异同点,并分析各自的特点。以应用量较大的位移型软钢阻尼器和速度型黏滞流体阻尼器为例,比较中国和欧盟检测标准的异同点,内容包括检测方法、检测设备和数据处理方法等,提出一些对现有检测标准的改进建议,供同行参考。  相似文献   

A response spectrum approach for seismic performance evaluation of actively controlled structures     

Mahendra P. Singh  Sarbjeet Singh  Enrique E. Matheu 《地震工程与结构动力学》2000,29(7):1029-1051

To evaluate and measure the effectiveness of active control schemes in reducing the response of structures subjected to earthquake excitations, it is common to use recorded or artificially generated earthquakes as input motions. This paper introduces the response spectrum analysis to evaluate linear control systems for seismic inputs defined by code‐prescribed or site‐specific ground response spectra. Using such a method one can evaluate a control system in a single analysis for the ensemble of time histories that are represented by the input response spectra. The response spectrum analysis can also facilitate the implementation of comprehensive parametric studies. A generalized response spectrum method is used to analyse systems with non‐symmetrical matrices that are caused by the general nature of the control actions imposed on the structure. The application of the method is demonstrated on several numerical examples of a building structure where the control force is applied through an active tuned‐mass damper. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

Design of dampers for structures based on optimal control theory     

Chin‐Hsiung Loh  Pei‐Yang Lin  Nan‐Hau Chung 《地震工程与结构动力学》2000,29(9):1307-1323

The aim of this paper was to propose a design guideline for using visco‐elastic dampers for the control of building structures subjected to earthquake loading as well as suspension roof structures subjected to wind loading. The active control algorithm was used to calculate the control forces. Based on the single‐mode approach the control forces were transformed to the forces which visco‐elastic dampers can provide. Application of the method to the design of the building structure with passive damping devices in the bracing system and to the suspension roof with dampers was studied. Through the application of optimal control theory a systematic design procedure to implement dampers in structures is proposed. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

一种旋转塑性势面模型及非关联塑性流动法则     

徐日庆  蒋佳琪  冯苏阳  鞠露莹 《岩土力学》2020,41(5):1474-1482

为了较好地描述软土塑性应变发展规律,提出了一种改进的塑性流动模型。该模型采用了与屈服函数形式相同,但具有一定倾角 的塑性势函数。土体在变形过程中,塑性流动方向会依赖于塑性势面的旋转而变化,直至达到破坏状态。通过对常规三轴试验结果的分析可以发现：在剪切过程中,塑性势面旋转角的初值 与终值 较为稳定,不受围压变化影响。在此试验观察基础上,引入了归一化的旋转角参数 以及描述土体应力状态的参数 ,在采用蛋形势函数的情况下二者具有良好的分段线性关系。利用该关系,建立了改进的塑性流动法则,只需要2个额外的模型参数。对所提出的塑性流动模型进行了验证,计算结果表明该模型能较好地反映塑性应变的变化趋势。  相似文献   

装设粘弹性阻尼器钢筋混凝土结构抗震实用分析   总被引：7，自引：0，他引：7  

韩建平  李慧  杜永峰 《世界地震工程》2005,21(1):117-122

为了设计装设粘弹性阻尼器受控结构、推进此项技术的工程应用,分别利用粘弹性阻尼器的复刚度模型和有限元模型,编制了振型分解反应谱程序和弹性时程分析程序,并对一装设粘弹性阻尼器的16层钢筋混凝土结构和相应原结构在多遇地震下的响应进行了分析。  相似文献   

减震结构中的粘弹性阻尼器参数优化   总被引：14，自引：0，他引：14  

凌和海  薛素铎  庄鹏 《世界地震工程》2005,21(3):126-130

研究了粘弹性阻尼器在结构减震控制中的参数优化问题。从性价比的角度提出r优化目标函数,建立了阻尼器的参数优化模型。以一单层框架为例,分别选用非线性规划中的复形法和通过调用MATLAB程序优化工具箱中Fmincon函数（简称Fmincon函数法）两种方法,编制丁相应的优化分析程序,对粘弹性阻尼器在单层框架结构减震控制中的参数优化进行丁分析。研究结果表明,两种优化算法都达到了预期的目标,实现了目标函数最小化。  相似文献   

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests     

Junwei Zhang  Qiusheng Li 《地震工程与结构动力学》2019,48(15):1678-1698

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献