2013—2019年度海洋科学技术奖计量统计及其科研合作网络分析          下载免费PDF全文

赵晓龙  李保石  王泉斌 《海洋开发与管理》2020,37(11):19-27

文章基于2013—2019年度海洋科学技术奖，运用计量统计、社会网络分析等研究方法，探究海洋科学技术奖获奖成果计量特征、学科分布、获奖机构及其科研合作关系等，直观揭示海洋科学技术奖所构成的科研合作范式、科研合作网络结构等，以期为海洋科研管理、科技创新和学科建设等提供科学参考。研究表明：整体上，海洋科学技术奖获奖成果呈逐年递增趋势，一等奖与二等奖的获奖等级比值呈下降趋势；学科划分上，获奖成果主要隶属于“海洋科学”学科，又以海洋生物学、海洋装备与设备、海洋化学和物理海洋学为主体；获奖机构方面，海洋科学技术奖已奖励包括中国海洋大学和中国科学院海洋研究所等涉海类高校和科研院所在内的各类海洋科技创新主体285家，分布在山东、浙江、广东、上海、北京、江苏等19个省（市、自治区）；科研合作方面，海洋科学技术奖获奖核心机构所构建的科研合作关系紧密，以自然资源部第二海洋研究所的中心度最高，中国海洋大学的中间中心度最高，其控制该科研合作网络中其他机构之间沟通交流的力度最大。  相似文献   

基于GPU加速的Boussinesq类波浪传播变形数值模型     

孙家文  朱桐  房克照  刘忠波 《海洋工程》2020,38(2):111-119

Boussinesq波浪模型是一类相位解析模型,在时域内求解需要较高的空间和时间分辨率以保证计算精度。为提高计算效率,有必要针对该类模型开展并行算法的研究。与传统的中央处理器(CPU)相比,图形处理器(GPU)有大量的运算器,可显著提高计算效率。基于统一计算设备架构CUDA C语言和图形处理器,实现了Boussinesq模型的并行运算。将本模型的计算结果同CPU数值模拟结果和解析解相比较,发现得到的结果基本一致。同时也比较了CPU端与GPU端的计算效率,结果表明,GPU数值模型的计算效率有明显提升,并且伴随数值网格的增多,提升效果更为明显。  相似文献   

HY-2B卫星散射计海面风场产品质量分析 *     

陈克海  解学通  张金兰  邹巨洪  张毅 《热带海洋学报》2020,39(6):30-40

星载微波散射计是获取全球海面风场信息的主要手段, HY-2B卫星散射计的成功发射为全球海面风场数据获取的持续性提供了重要保障。本文利用欧洲中期天气预报中心(European Center for Medium-Range Weather Forecasts, ECMWF)再分析风场数据、热带大气海洋观测计划(Tropical Atmosphere Ocean Array, TAO)和美国国家数据浮标中心(National Data Buoy Center, NDBC)浮标获取的海面风矢量实测数据, 对HY-2B散射计海面风场数据产品的质量进行统计分析。分析表明, HY-2B风场与ECMWF再分析风场对比, 在4~24m·s^-1风速区间内, 风速和风向均方根误差(root mean square error, RMSE)分别为1.58m·s^-1和15.34°; 与位于开阔海域的TAO浮标数据对比, 风速、风向RMSE分别为1.03m·s^-1和14.98°, 可见HY-2B风场能较好地满足业务化应用的精度要求(风速优于2m·s^-1, 风向优于20°)。与主要位于近海海域的NDBC浮标对比, HY-2B风场的风速、风向RMSE分别为1.60m·s^-1和19.14°, 说明HY-2B散射计同时具备了对近海海域风场的良好观测能力。本文还发现HY-2B风场质量会随风速、地面交轨位置等变化, 为用户更好地使用HY-2B风场产品提供参考。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

Cu2+对序批式反应器中活性污泥胞外聚合物产量及其组分的影响     

李姗姗  朱四富  马丙瑞  于娜玲  赵长坤  信帅帅  潘云浩  吴淑妍  武原原  高孟春 《中国海洋大学学报(自然科学版)》2020,(2):107-115

研究了长期暴露条件下Cu2+对序批式反应器(SBR)性能及其活性污泥胞外聚合物(EPS)特性的影响。结果表明,进水中加入10 mg·L-1的Cu2+后,在SBR运行的第16~55天,COD和NH+4-N的去除率保持稳定;在第56~75天,COD和NH+4-N的平均去除率与进水Cu2+浓度为0 mg·L-1时相比分别下降了3.88%和6.41%。浓度为10 mg·L-1的Cu2+长期作用下,活性污泥中EPS、松散附着EPS(LB-EPS)和紧密附着EPS(TB-EPS)产量及LB-EPS和TB-EPS中蛋白质(PN)含量增加。傅里叶变换红外光谱分析表明10 mg·L-1 Cu2+的长期暴露导致TB-EPS中PN的C=O键、N-H键和C-O键相对含量降低。X射线光电子能谱(XPS)测试结果显示在10 mg·L-1 Cu2+长期暴露条件下,LB-EPS和TB-EPS中元素Cu和O百分含量增加。  相似文献   

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析     

胡小鹏 《山东国土资源》2020,36(5):38-43

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。  相似文献   

频率域海洋可控源电磁垂直各向异性三维反演   总被引：1，自引：0，他引：1       下载免费PDF全文

彭荣华  胡祥云  李建慧  刘亚军 《地球物理学报》2019,62(6):2165-2175

地层宏观电性各向异性会对可控源电磁响应产生重要影响.由于海底地层电性结构常表现为电导率各向异性，若仅对海洋可控源电磁（MCSEM）数据进行常规各向同性反演，有可能无法获得准确的反演解释结果，从而削弱MCSEM技术的可靠性.本文实现了电导率垂直各向异性（VTI）条件下频率域海洋可控源电磁数据三维反演算法.其中，三维正演采用基于二次场控制方程的交错网格有限体积法，并利用直接矩阵分解技术来求解离散所得的大型线性方程组，有利于快速计算多场源的响应.反演采用具有近似二次收敛性的高斯牛顿算法对目标函数进行最优化.最后，对具有VTI电性各向异性特征的盐丘构造模型的MCSEM合成数据分别进行了电导率各向同性和垂直各向异性三维反演，结果表明：各向同性三维反演算法无法对受VTI介质影响的MCSEM数据进行正确的反演解释，而垂直各向异性三维反演能够获得更为可靠的地下电阻率结构和异常体分布，展现出对海底电性各向异性结构更为优良的反演解释能力.  相似文献   

利用接收函数方法研究中国东北东南部地区不同构造体的地壳特征   总被引：3，自引：0，他引：3       下载免费PDF全文

李天觉  陈棋福 《地球物理学报》2019,62(8):2899-2917

基于我们布设的探测深俯冲的中国东北地震台阵NECsaids台阵和固定地震台长时段的观测记录及NECESSArray流动台阵共计152个台站数据提取得到的33752条P波接收函数，采用H-κ叠加分析和共转换点（CCP）叠加成像等方法进行统一分析处理，并汇集他人接收函数研究结果得到中国东北东南部地区迄今为止最高分辨率的地壳厚度和平均波速比分布图像.对中国东北东南部地区不同构造体的地壳特征综合分析研究表明：研究区不同陆块的地壳属性存在明显差别，张广才岭地块中南部的地壳厚度和波速比与华北克拉通东北缘相当，地壳厚度同地表地形之间显示有明显的正相关关系；松辽地块东南缘地壳最薄、波速比最高，地壳厚度同壳内波速比之间显示出明显的负相关关系；兴凯地块西部地区的地壳结构表现为稍厚的地壳厚度和研究区内最低的壳内波速比，其地壳厚度同壳内波速比之间亦显示出明显的负相关关系；佳木斯地块西南缘在具有"正常"的壳内波速比同时地壳最厚.研究区内的郯庐断裂带北延段在切穿其下Moho面的同时表现出南北分段的特征：北段（44.4°N—47°N）两分支之下的Moho面整体下凹，而南段（41.5°N—43.3°N）两分支之下的Moho面则整体上隆.长白山天池火山下方表现为Moho面下凹沉落及高壳内波速比特征，推测其壳内岩浆囊很可能存在于火山口东北隅至少10 km的范围内.  相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献