敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

厚层切叠砂体自然层描述方法:以北一区断东葡一组1-4小层为例     

吴迪  马世忠  景丽娟  周志国 《世界地质》2020,39(1):106-112

将多期切叠河道砂体归类合并,建立一个“垂向连续,横向联通的表外砂岩空间体”(其中砂岩间夹层厚度≤0.4 m)的自然层概念来控制多期河道复合切叠厚砂体。以北一匹断东萄一组1-4小层为例,利用自然层间砂体厚度、切叠程度、测井曲线形态、相叠加类型及砂体叠加期次将自然层分为5类;再依据砂体间切叠位置、切叠程度和切叠形态的差异建立自然层剖面表征方法;依据砂体叠加期次,建立自然层在平面上表征模式。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand     

《Applied Ocean Research》2019

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.  相似文献   

Mixed sand–mud bedforms produced by transient turbulent flows in the fringe of submarine fans: Indicators of flow transformation     

Megan L. Baker  Jaco H. Baas 《Sedimentology》2020,67(5):2645-2671

  相似文献   

Effect of sand on the vacuum consolidation of dredged slurry     

Jun Wang  Yuanqiang Cai  Xueyu Geng  Fengqi Xu 《Marine Georesources & Geotechnology》2018,36(2):238-244

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.  相似文献   

Acoustic and petrophysical properties of mechanically compacted overconsolidated sands: Part 2 – Rock physics modelling and applications     

Sirikarn Narongsirikul  Nazmul Haque Mondol  Jens Jahren 《Geophysical Prospecting》2019,67(1):114-127

Part one of this paper reported results from experimental compaction measurements of unconsolidated natural sand samples with different mineralogical compositions and textures. The experimental setup was designed with several cycles of stress loading and unloading applied to the samples. The setup was aimed to simulate a stress condition where sediments underwent episodes of compaction, uplift and erosion. P-wave and S-wave velocities and corresponding petrophysical (porosity and density) properties were reported. In this second part of the paper, rock physics modelling utilizing existing rock physics models to evaluate the model validity for measured data from part one were presented. The results show that a friable sand model, which was established for normally compacted sediments is also capable of describing overconsolidated sediments. The velocity–porosity data plotted along the friable sand lines not only describe sorting deterioration, as has been traditionally explained by other studies, but also variations in pre-consolidation stress or degree of stress release. The deviation of the overconsolidated sands away from the normal compaction trend on the V_P/V_S and acoustic impedance space shows that various stress paths can be predicted on this domain when utilizing rock physics templates. Fluid saturation sensitivity is found to be lower in overconsolidated sands compared to normally consolidated sands. The sensitivity decreases with increasing pre-consolidation stress. This means detectability for four-dimensional fluid saturation changes can be affected if sediments were pre-stressed and unloaded. Well log data from the Barents Sea show similar patterns to the experimental sand data. The findings allow the development of better rock physics diagnostics of unloaded sediments, and the understanding of expected 4D seismic response during time-lapse seismic monitoring of uplifted basins. The studied outcomes also reveal an insight into the friable sand model that its diagnostic value is not only for describing sorting microtextures, but also pre-consolidation stress history. The outcome extends the model application for pre-consolidation stress estimation, for any unconsolidated sands experiencing similar unloading stress conditions to this study.  相似文献   

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory     

Qingqing Yuan  Min Zhao  Tong Ge 《Marine Georesources & Geotechnology》2018,36(7):818-826

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.  相似文献   

北部湾地区海砂填料的动力特性分析     

王家全  陈胜前  唐毅  黄世斌  黄钦政 《海洋工程》2020,38(5):149-155

为研究北部湾地区海砂填料的动力特性，采用高级动态三轴测试系统开展循环荷载下的动三轴试验，研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小，围压150 kPa时振次10 000后应变仅为3%；随着动应力幅值的增大轴向累积应变随之增大，且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大，不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势，ε_d>0.3%后开始趋于稳定；不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势，其中动应力幅值对动弹性模量有明显的影响，围压影响相对较小。孔压比随动应力幅值增加而减小，随围压增加而增加。  相似文献   

珊瑚颗粒形状对钙质粗粒土的压缩性能影响     

张斌  柴寿喜  魏厚振  孟庆山  陈杨 《工程地质学报》2020,28(1):85-93

珊瑚颗粒形状不规则是其显著区别于陆源土的一大特征。为揭示珊瑚颗粒形状对钙质粗粒土压缩性能的影响,人工挑选出不同形状(块状、枝状、棒状、片状)的珊瑚颗粒,以块状颗粒为基础,与其他3种不同形状的粗颗粒任意一种混合,控制不同颗粒形状配比制成钙质粗粒土试样,完成室内压缩试验,对比分析试验前后珊瑚颗粒的圆度、长宽比、扁平度和凹凸度等形状参数,评价颗粒形状对压缩性能的影响。结果表明:(1)粒径为10~20 mm钙质粗粒土的压缩模量是4~5. 5 MPa,回弹系数为42~53;(2)随枝状、棒状或片状颗粒掺量的增加(0、10%、20%、30%),试样压缩模量呈小幅波状变化,回弹系数呈持续减小趋势;(3)各加载区间应力-应变曲线包括应力快速增长阶段、应力-应变同步增长阶段、应变增长阶段共3个阶段和1个稳定点;(4)随枝状颗粒掺量的增加,试样的长宽比和凹凸度逐渐增加,圆度和扁平度基本无变化;因颗粒破碎的影响,试验后试样的长宽比及扁平度有所增加,圆度及凹凸度则有所减小。选择钙质粗粒土地基时,应考虑其压缩性能,避免施工初期的快速加载。  相似文献