高分六号宽幅相机在轨几何定标及精度验证   总被引：1，自引：0，他引：1  

王密  郭贝贝  龙小祥  薛麟  程宇峰  金淑英  周晓 《测绘学报》2020,49(2):171-180

高分六号宽幅相机能够实现单相机成像幅宽优于800 km,对大尺度地表观测和环境监测具有独特优势。在轨几何定标是光学遥感卫星几何处理的关键环节,直接影响影像的几何质量。本文充分考虑高分六号宽幅相机超大视场的畸变特性以及多谱段的成像特点,提出宽幅相机在轨几何定标方法,采用基于探元指向角的几何定标模型补偿宽幅相机系统误差,通过绝对定标和相对定标方法联合估计各波段的内外定标参数。利用Landsat 8影像、资源三号DSM为参考数据,对宽幅相机进行绝对定标处理,再利用ASTER GDEM为参考数据进行相对定标处理,其几何定标结果表明,高分六号宽幅影像绝对定位精度在3像素左右,内部几何精度能稳定在1像素,且波段间配准精度在0.3像素以内,表明在轨几何定标后高分六号宽幅影像几何质量得到了明显的提升。  相似文献   

海南省连片贫困地区农户致贫风险分析   总被引：4，自引：1，他引：3  

张金萍  宋伟  林丹  余珍鑫  李庭筠  罗邱戈  程叶青 《地理科学》2020,40(4):608-616

农村贫困与减贫是世界性难题,也是中国各级政府高度重视并着力解决的重大民生问题。基于农户及致贫风险的文献梳理,从区位、社会和劳动力3个要素维度构建了农户致贫风险分析的二元Logistic回归模型。采用484户农户问卷调查数据,分析了海南省连片贫困地区农户的致贫风险,提出有效减贫和持续发展对策。研究发现:① 海南连片贫困地区生态环境良好但贫困发生率较高,家庭劳动力较充裕但受教育水平较低,子女教育支出负担重,因病因残致贫比例较高,女性务工人口较多,农户自身脱贫致富的发展动力不足。② 海拔高度200 m以下、男性户主、拥有残疾或患病成员、务工人口比例低、女性务工人员占比高、以及单位劳动力供养学生数高的农户具有更大的致贫风险。③ 研究未发现女性户主、少数民族、低受教育水平户主、大型规模家庭有更高的致贫风险,女性成员比例、抚养比等因素对农户贫困影响较小。激发农户内生动力、大力发展特色化和规模化农业、增加农户就业机会、加强针对农民工、女性务工人员和病残群体的社会保障等减贫政策制定实施是实现脱贫攻坚目标的重要途径。  相似文献   

干旱区地表温度和热岛效应演变研究——以宁夏沿黄城市带为例          下载免费PDF全文

孙灏  马立茹  蔡创创  黄涛  吕林涛  阮琳  陈伟 《干旱区地理》2020,43(3):694-705

宁夏沿黄城市带位于宁夏东北部，不仅是干旱地区地理研究的重点区域，也是宁夏经济发展的核心区域。基于2000—2018年的MODIS地表温度、土地覆盖类型以及植被覆盖率数据，通过计算热岛比例指数 (URI)，利用Mann-Kendall非参数检验及Sen’s斜率估计法，对宁夏沿黄城市带近20 a白天和夜间的地表温度（LST）和热岛效应时间变化进行分析。结果表明：（1） 近20 a来，宁夏沿黄城市带大部分地区[WTBX]LST变化不显著，但在植被覆盖率增加区域，白天LST显著减小而夜间LST显著上升；植被覆盖率减小区域与之相反；夜间LST[WTBZ]变化幅度强于白天。（2） 宁夏沿黄城市带的热岛效应通常在白天较弱、在夜间较强；白天和夜间时刻的城市热岛效应在一年内呈现不同的季节变化特点,白天春冬较强，夜间夏季较强；过去近20 a，宁夏沿黄城市带白天热岛效应呈现稍微减弱趋势，夜间热岛效应呈现稍微增强趋势，但变化趋势均不显著。（3） 从植被覆盖率和地物类型两个影响因素的研究表明，植被覆盖率是影响地表温度变化的重要因素，城建区与郊区主要地物温差的改变是城市热岛强度变化的重要原因。从长时间序列变化的角度详细分析干旱区城市热岛的特征和变化原因，可为干旱区城市热岛带来的环境问题治理提供参考，也为研究干旱区热岛提供了借鉴。  相似文献   

Seismic design of floor–wall joints of multi-storey CLT buildings to comply with regularity in elevation     

Davide Trutalli  Luca Pozza 《Bulletin of Earthquake Engineering》2018,16(1):183-201

The effects of irregularity in elevation of cross-laminated timber buildings have not been fully analysed in literature to provide useful information for the design. In this work, a number of building configurations, regular or irregular in elevation, characterized by a different arrangement per storey of the floor–wall joints have been analysed by means of non-linear dynamic analyses. Comparative results in terms of ratio between the behaviour q-factor of the investigated irregular configurations and that of reference regular ones, show that less dissipative capacity can be expected if the building is irregular due to a disequilibrium among storeys between the actual and the required strength provided by the floor–wall joints. A correlation method to estimate the behaviour q-factor for perfectly regular cross-laminated timber buildings is here presented and extended to in-elevation irregular ones. A new empirical formulation to assess the reliable corrective factor accounting for the irregularity in elevation of cross-laminated timber buildings, according to Eurocode 8 provisions, is also proposed. A final discussion about the implications of in-elevation irregularity on the building design is reported.  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Probabilistic seismic hazard assessment for South-Eastern France     

Christophe Martin  Gabriele Ameri  David Baumont  David Carbon  Gloria Senfaute  Jean-Michel Thiry  Ezio Faccioli  Jean Savy 《Bulletin of Earthquake Engineering》2018,16(6):2477-2511

The accurate evaluation and appropriate treatment of uncertainties is of primary importance in modern probabilistic seismic hazard assessment (PSHA). One of the objectives of the SIGMA project was to establish a framework to improve knowledge and data on two target regions characterized by low-to-moderate seismic activity. In this paper, for South-Eastern France, we present the final PSHA performed within the SIGMA project. A new earthquake catalogue for France covering instrumental and historical periods was used for the calculation of the magnitude-frequency distributions. The hazard model incorporates area sources, smoothed seismicity and a 3D faults model. A set of recently developed ground motion prediction equations (GMPEs) from global and regional data, evaluated as adequately representing the ground motion characteristics in the region, was used to calculate the hazard. The magnitude-frequency distributions, maximum magnitude, faults slip rate and style-of-faulting are considered as additional source of epistemic uncertainties. The hazard results for generic rock condition (Vs30 = 800 m/s) are displayed for 20 sites in terms of uniform hazard spectra at two return periods (475 years and 10,000 years). The contributions of the epistemic uncertainties in the ground motion characterizations and in the seismic source characterization to the total hazard uncertainties are analyzed. Finally, we compare the results with existing models developed at national scale in the framework of the first generation of models supporting the Eurocode 8 enforcement, (MEDD 2002 and AFPS06) and at the European scale (within the SHARE project), highlighting significant discrepancies at short return periods.  相似文献   

Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings     

Javier Ortega  Graça Vasconcelos  Hugo Rodrigues  Mariana Correia 《Bulletin of Earthquake Engineering》2018,16(9):3871-3904

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献   

Deriving fragility functions from bilinearized capacity curves for earthquake scenario modelling using the conditional spectrum     

Clotaire Michel  Helen Crowley  Pia Hannewald  Pierino Lestuzzi  Donat Fäh 《Bulletin of Earthquake Engineering》2018,16(10):4639-4660

The development of fragility curves to perform seismic scenario-based risk assessment requires a fully probabilistic procedure in order to account for uncertainties at each step of the computation. This is especially true when developing fragility curves conditional on an Intensity Measure that is directly available from a ground-motion prediction equation. In this study, we propose a new derivation method that uses realistic spectra instead of design spectral shapes or uniform hazard spectra and allows one to easily account for the features of the site-specific hazard that influences the fragility, without using non-linear dynamic analysis. The proposed method has been applied to typical school building types in the city of Basel (Switzerland) and the results have been compared to the standard practice in Europe. The results confirm that fragility curves are scenario dependent and are particularly sensitive to the magnitude of the earthquake scenario. The same background theory used for the derivation of the fragility curves has allowed an innovative method to be proposed for the conversion of fragility curves to a common IM (i.e. spectral acceleration or PGA). This conversion is the only way direct comparisons of fragility curves can be made and is useful when inter-period correlation cannot be used in scenario loss assessment. Moreover, such conversion is necessary to compare and verify newly developed curves against those from previous studies. Conversion to macroseismic intensity is also relevant for the comparison between mechanical-based and empirical fragility curves, in order to detect possible biases.  相似文献