首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The absorber is known to be vertical axisymmetric for a single-point wave energy converter (WEC). The shape of the wetted surface usually has a great influence on the absorber’s hydrodynamic characteristics which are closely linked with the wave power conversion ability. For complex wetted surface, the hydrodynamic coefficients have been predicted traditionally by hydrodynamic software based on the BEM. However, for a systematic study of various parameters and geometries, they are too multifarious to generate so many models and data grids. This paper examines a semi-analytical method of decomposing the complex axisymmetric boundary into several ring-shaped and stepped surfaces based on the boundary discretization method (BDM) which overcomes the previous difficulties. In such case, by using the linear wave theory based on eigenfunction expansion matching method, the expressions of velocity potential in each domain, the added mass, radiation damping and wave excitation forces of the oscillating absorbers are obtained. The good astringency of the hydrodynamic coefficients and wave forces are obtained for various geometries when the discrete number reaches a certain value. The captured wave power for a same given draught and displacement for various geometries are calculated and compared. Numerical results show that the geometrical shape has great effect on the wave conversion performance of the absorber. For absorbers with the same outer radius and draught or displacement, the cylindrical type shows fantastic wave energy conversion ability at some given frequencies, while in the random sea wave, the parabolic and conical ones have better stabilization and applicability in wave power conversion.  相似文献   

2.
The eigenfunction expansion method (will be referred to as error function method in this paper) of analysing reflection and transmission of ocean waves at a semi-infinite thin elastic plate [J Geophys Res 95 (1990) 11629; Phil Trans R Soc Lond A 347 (1994) 185] is modified and extended to cases with simply supported and built-in edges. The form of the error function in the eigenfunction expansion method of Fox and Squire [J Geophys Res 95 (1990) 11629] has been modified based on a dimensional analysis and also extended to plates with either a simply supported or a built-in edge. The modified error function does not include the so-called Lagrange multipliers used in the original method and therefore the modified solution is independent of the selection of the Lagrange multipliers. It is demonstrated that the modified error function method satisfies the relation of energy conservation very well for the three edge conditions examined. The relation of energy conservation for plates is derived for elastic plates with simply supported and built-in edges and it is found that the relation of energy conservation for a free edge is also held for simply supported and built-in edges.In addition, a minor modification has also been made to the eigenfunction method (will be called inner product method in this study) of Sahoo et al. [Proceedings of 10th International Offshore and Polar Engineering Conference 3 (2000) 594]. It will be shown that the modified inner product method becomes mathematically well defined. The modified coefficient matrixes for different edge conditions are diagonal and thus the linear simultaneous equations can be solved very easily. It is also demonstrated with examples that the extended error function method and the modified inner product method give identical results.  相似文献   

3.
The radiation and diffraction problems are considered in the frequency domain for a thin elastic plate of rectangular planform floating in an irrotational, incompressible ocean of infinite depth. The inner potential field inside a hemisphere surrounding the plate is represented using a spherical harmonic expansion which suits the geometry and zero-draft nature of the plate. Problems associated with distributing sources in the free surface are avoided. The Chen and Mei variational principle is used to weakly match this inner solution and its normal derivative to an outer field described by distributing sources on the exterior of the hemisphere. The validity of the procedure is first illustrated by considering a heaving circular disk. Numerous hydrodynamic coefficients are presented as benchmark data for floating flexible structures. The transient motion of the plate is simulated using rational approximations (in the frequency domain) to the radiation impedance and diffraction mapping which are implemented as ODE's in the time domain.  相似文献   

4.
开孔沉箱与斜向波作用的理论研究和实验验证   总被引:2,自引:0,他引:2  
应用透空壁内流体速度与壁两侧的压力差成正比的线性模型,研究了无限多个开孔沉箱在斜向波作用下的反射问题。整个流域被分成无限多个子域,在每个子域内应用特征函数展开法对速度势进行展开。对于沉箱内的波浪运动,根据沉箱位置引入相位差概念。在构造反射波模型时,考虑了结构物几何形状周期性的影响。结果表明,当孔隙系数无限大时,开孔墙前后的速度非常接近,反射系数符合能量守恒定律。在低频入射波作用下,沉箱越短,其反射系数越小,反射系数随着角度的变大而减小。  相似文献   

5.
波浪对上部开孔带内柱的圆筒结构的绕射   总被引:1,自引:0,他引:1  
滕斌  赵明  李玉成 《海洋学报》2001,23(6):133-142
应用透空壁内流体速度与两壁间压力差成正比的线性模型和特征函数展开方法,建立了外壁上部开孔并带有内柱的圆筒结构对波浪绕射的解析解.通过数值计算研究了外壁开孔率的大小、圆筒与内柱半径之比、筒内水深等因素对圆筒上总的波浪作用力和圆筒周围波浪高度的影响.经数值研究发现随着外壁开孔率的增大圆筒迎浪端的波浪高度和圆筒结构上总的波浪力明显减小,外壁孔隙特性G虚部的增加对波高和波浪力的衰减也有一定的影响;增加圆筒内部的水深可减小圆筒周围的波浪高度,降低圆筒结构上的总波浪力.  相似文献   

6.
The resonance phenomenon of fluid motions in the gap between ship section, seabed and vertical quay wall is studied numerically and experimentally. The natural frequency of the fluid motions in the gap is derived. A two-dimensional time-domain coupled numerical model is developed to calculate the non-linear wave forces acting on a ship section against vertical quay in a harbor. The fluid domain is divided into an inner domain and an outer domain. The outer domain is the area between the left side of ship section and the incident boundary, where flow is expressed by Boussinesq equations. The rest area is the inner domain, which is the domain beneath the ship section plus the domain between the right side of ship section and vertical quay wall. The flow in the inner domain is expressed by Newton's Second Law. Matching conditions on the interface between the inner domain and the outer domain are the continuation of volume flux and the equality of pressures. The numerical results are validated by experimental data.  相似文献   

7.
The problem of the hydrodynamic interaction with the arc-shaped bottom-mounted breakwaters is investigated theoretically. The breakwater is assumed to be rigid, thin, impermeable and vertically located in a finite water depth. The fluid domain is divided into two sub-regions of inner and outer by an auxiliary circular interface. Linear theory is assumed and the eigenfunction expansion approach is used to determine the wave field. In order to examine the validity of the theoretical model, the analytical solutions are compared to agree well with published results with the same parameters. Numerical results including wave amplitude, surge pressure, and wave force are presented with different model parameters. The major factors including wave parameters, structure configuration, and water depth that affect the surge pressure, wave forces, and wave amplitudes are discussed and illustrated by some graphs and cloud maps.  相似文献   

8.
开孔沉箱在斜向入射波作用下受力研究   总被引:4,自引:1,他引:4       下载免费PDF全文
应用透空壁内流体速度与壁两侧的压力差成正比的线性模型,研究了斜向波与无限多个开孔沉箱的相互作用.依照结构物的几何形状,把整个流域分成无限多个子域,在每个子域内应用特征函数展开法对速度势进行展开.对于沉箱内的波浪运动,引入相位差概念;在构造反射波模型时,考虑了结构物的几何形状影响.列举出物理模型实验结果与数值实验结果的比较,可以看出两者吻合较好.进一步的数值计算验证表明,当孔隙系数无限大时,开孔墙前后的速度非常接近.在低频入射波作用下,垂直于沉箱的水平力随角度的变大而减小,平行于沉箱排列方向的力则变大.  相似文献   

9.
A domain decomposition and matching method in the time-domain is outlined for simulating the motions of ships advancing in waves. The flow field is decomposed into inner and outer domains by an imaginary control surface, and the Rankine source method is applied to the inner domain while the transient Green function method is used in the outer domain. Two initial boundary value problems are matched on the control surface. The corresponding numerical codes are developed, and the added masses, wave exciting forces and ship motions advancing in head sea for Series 60 ship and S175 containership, are presented and verified. A good agreement has been obtained when the numerical results are compared with the experimental data and other references. It shows that the present method is more efficient because of the panel discretization only in the inner domain during the numerical calculation, and good numerical stability is proved to avoid divergence problem regarding ships with flare.  相似文献   

10.
给出了一种联合瞬态格林函数和Rankine源进行有航速浮体时域水动力分析的混合——边界元方法。在三维混合边界元方法中,通过一个匹配面将流体域划分为内域和外域,在内域中使用Rankine源以模拟直壁或非直壁船体及线性或非线性自由面条件,在外域中使用瞬态格林函数以满足自由面条件和远方辐射条件。使用该方法计算了一个有航速潜没圆球的波浪力,和解析结果的比较证明了该方法的正确性。进一步给出了一个有航速Wigley船的水动力结果,计算结果稳定,没有外传波向内反射的现象发生。  相似文献   

11.
系泊船非线性波浪力时域计算:二维模型   总被引:7,自引:1,他引:6  
王大国  邹志利 《海洋学报》2004,26(2):104-117
为找到具有工程实用价值的港口系泊船波浪力的时域计算方法,建立了在港口中存在系泊船时非线性波浪力时域计算的垂直二维耦合模型:用Boussinesq方程计算船的两侧的外域,用欧拉方程计算船底面下的内域,两域在交界面处的连接条件是流量连续和压力相等.将复平面内的边界元方法应用于所研究问题,对耦合模型进行了验证.进行了相关模型实验,实验结果与数值计算结果比较表明这两种数值计算模型都具有满意的精度,但耦合模型的计算效率要远远高于边界元方法的计算效率.本耦合模型的数学处理简单,可适用于工程计算.  相似文献   

12.
双层局部开孔板沉箱对波浪反射的理论研究   总被引:1,自引:0,他引:1  
提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域,在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式,在速度势的展开中,考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数,继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较,符合较好。并进一步讨论了几个重要因素对反射系数的影响。  相似文献   

13.
苏高飞  勾莹  滕斌 《海洋工程》2023,41(3):1-13
为高效准确地对完全非线性波浪与二维固定结构物的相互作用进行模拟分析,建立了二维完全非线性时域耦合模型。耦合模型将计算域划分为靠近结构物的内域和远离结构物的外域,每个区域均采用满足完全非线性自由水面边界条件的波浪模型进行求解。在内域使用Laplace方程描述流体运动并采用高阶边界元法(BEM)对其进行求解;而在没有结构物的外域,波浪运动的控制方程为Irrotational Green-Naghdi(IGN)方程并采用有限元法(FEM)对其进行求解。内域和外域通过一段重叠区域进行耦合,从而实现模型间变量的传递。首先利用耦合模型分别对规则波的传播、直墙前立波的生成以及相关物理模型试验进行模拟,数值结果与精确解和试验结果的良好吻合验证了耦合模型耦合方式的合理性以及处理非线性问题的准确性;然后使用耦合模型模拟分析了波浪与固定结构物间的相互作用,并将结果与线性解析解以及完全非线性BEM模型的结果进行了对比分析,进一步证明了耦合模型的正确性与高效性。  相似文献   

14.
This paper deals with the evaluation of the natural frequencies in heave motion of a single floating Oscillating Water Column device along with the natural frequencies of the water column inside the oscillating chamber. Two types of OWCs are examined, a simple-type device, consisting of a partially immersed toroidal body and a novel-type device, consisting also of a partially immersed toroidal body supplemented however by a coaxial interior truncated cylinder moving in phase with the outer chamber, thus forming a floating unit. Numerical results are given concerning the three boundary value problems, namely, the diffraction, the motion- and the pressure- dependent radiation problems, obtained through an analytical solution method using matched axisymmetric eigenfunction expansion formulations. The effect of the air pressure distribution inside the oscillating chamber on the natural frequencies in heave motion of the two examined types of OWCs and on the natural frequency of the water column motion inside the chamber, is presented and discussed thoroughly. It is demonstrated that the heave natural frequencies are strongly dependent on the type of the examined OWC and the device’s inner air pressure and should be taken into consideration when designing a floating OWC device.  相似文献   

15.
An array of large concentric porous cylinder arrays is mounted in shallow water exposed to cnoidal waves. The interactions between waves and cylinders are studied theoretically using an eigenfunction expansion approach. Semi-analytical solutions of hydrodynamic loads and wave run-up on each cylinder are obtained using first approximation to cnoidal waves. The square array configuration of four-legged identical concentric porous cylinder is investigated in present study. Numerical results reveal the variation of dimensionless wave force and wave run-up on individual cylinder with angle of incidence, porosity parameter, spacing between outer and inner cylinders, spacing between concentric porous cylinders and wave parameter. Different mechanism of wave force is found under different range of scattering parameter.  相似文献   

16.
This paper describes a plane regular wave interaction with a combined cylinder which consists of a solid inner column and a coaxial perforated outer cylinder.The outer perforated surface is a thin porous cylinder with an annular gap between it and the inner cylinder.The non-linear boundary condition at the perforated wall is a prime focus in the study;energy dissipation at the perforated wall occurs through the resistance to the fluid across the perforated wall.Explicit analytical formulae are presented to calculate the wave run-up on the outer and inner surfaces of the perforated cylinder and the surface of the inner column.The theoretical results of the wave run-up are compared with previous experimental data.Numerical results have also been obtained:when the ratio of the annular gap between the two cylinders to incident wavelength(b-a)/L≤0.1,the wave run-up on the inner surface of the perforated cylinder and the surface of inner column can partially or completely exceed the incident wave height.  相似文献   

17.
The wave diffraction and radiation problem is studied numerically by using a higher-order boundary element method. The convergence of the higher-order boundary element method is tested systematically for bodies of different shapes. For the second-order force, particular attention is paid to the contribution of the second-order potential, following the line of Molin's approach. For numerical evaluation, the free surface is divided into three subregions; inner, intermediate and outer ones. In the inner region, the integral is evaluated numerically by using higher-order boundary elements. In the intermediate region, semi-analytic form is constructed with the help of eigen functions. In the outer domain, the analytic solution is available. This subdivision scheme reduces the numerical burden remarkably.  相似文献   

18.
A three-dimensional modeling of multidirectional random-wave diffraction by a group of rectangular submarine pits is presented in this paper. The fluid domain is divided into N interior regions representing the pit area and an overall exterior region separated by the imaginary pit boundaries. In the interior region, the analytical expressions of the Fourier series expansion for velocity potentials in the pit regions have been derived with the unknown coefficients determined from a series of Green's function based boundary integral equations. The boundary integral approach has also been applied to obtain the velocity potential and free-surface elevation in the exterior region. The Pierson–Moskowitz (P–M) frequency spectrum was selected for the random wave simulation using the superposition of solutions of a finite number of decomposed wave components. Numerical results for the cases of regular waves and random waves are presented to examine the influences of the pit geometry and incident wave condition on the overall wave field. The general diffraction pattern of alternate bands of increase and decrease of relative wave height in front of the pit system can be observed. It is found that, in the shadow region, the relative wave height is reduced. As the number of pit increases, the effectiveness of reducing the relative wave height behind the multiple-pit system increases. However, the relative wave height within the pit area and in front of the leading pit shows increasing trend. It is noticed that under the random-wave condition, the level of increase and decrease of the relative wave height due to the existence of submarine pits is less pronounced than that observed from results in regular-wave condition.  相似文献   

19.
The hydrodynamic problem of a two dimensional wedge tank filled with liquid entering a calm water surface is analysed based on the incompressible velocity potential theory. The motion effect of inner liquid on the entry process is investigated through comparison with the result containing equivalent solid mass or the liquid being frozen. The problem is solved through the boundary element method in the time domain. Two separated computational regions are constructed. One is the inner domain for the internal liquid, and the other is the outer open domain for the open water. The former is solved in the physical coordinate system, and the latter is solved in a stretched coordinate system. The solutions of two separated domains are connected through the motion of the body. The auxiliary function method is extended to decouple the nonlinear mutual dependence between fluid loads from two separated domains and the body motion. Detailed results for wedge motion, external impact pressure and free surface, and for internal pressure, free surface deformation and liquid motion are provided. Through comparison with the results of a wedge tank with frozen ice, in-depth discussion on the effect of the inner liquid is provided.  相似文献   

20.
-In this paper, an analytical solution in the outer region of finite water depth is derived for the second-order diffraction potential, which gives a clear physical meaning of the wave transmission and reflection characteristics in the far field. A numerical method-simple Green's function technique-for calculating the second-order diffraction potential in the inner region is also described. Numerical results are provided for the second-order wave forces on a semi-submerged cylinder. It is found that the contribution of second-order diffraction potential to second-order wave forces is important. The effect of water depth and submerged depth on the wave force is also discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号