首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
青藏高原措勤盆地大地电磁测量初步结果   总被引:2,自引:0,他引:2  
配合青藏高原油气资源战略选区调查与评价工作,在西藏地区措勤盆地开展了大地电磁测深工作。根据测量结果对盆地边界、基底埋深和盆地基本构造格架给出了初步解释;提出了措勤盆地应按中生代和古生代盆地分别进行评价的新认识;指出班公湖~怒江缝合带南界断裂为一由北向南的逆冲推覆带,其下可能有较新时代的沉积地层。测量结果对认识措勤盆地结构构造,盆地油气资源潜力评价提供了有意义的依据。  相似文献   

2.
西藏措勤盆地构造特征与地壳缩短   总被引:2,自引:0,他引:2       下载免费PDF全文
措勤盆地为青藏高原仅次于羌塘盆地的第二大海相盆地,笔者通过对盆地基底和盖层变形特征分析,将措勤盆地基底划分为北部拗陷、北部隆起、中部拗陷和南部隆起4个一级构造单元;盖层划分为北部拗褶带、北部冲断带、中部拗褶带、南部冲断带和南部拗褶带5个一级构造单元,并利用平衡剖面计算得到措勤盆地晚白垩世缩短约24%。  相似文献   

3.
措勤地区竟柱山组沉积特征及构造意义   总被引:3,自引:0,他引:3       下载免费PDF全文
上白垩统竟柱山组在西藏措勤地区主要沿班公湖-怒江缝合带、且坎-古昌-阿索断裂带和塔若错北-达瓦错南-秋措麦凹陷带断续分布。主要为一套磨拉石的紫红色碎屑岩,其沉积环境以扇三角洲和三角洲为主。扇三角洲和三角洲的前积层理指示了其进积方向,表明早期物源来自北部,而晚期来自南部的陆源物质增加。竞柱山组磨拉石沉积的发育,是班公湖-怒江缝合带造山运动的证据。  相似文献   

4.
西藏措勤中——新生代沉积盆地演化   总被引:2,自引:0,他引:2  
措勤盆地位于西藏冈底斯地块中西段,是在古生界褶皱基底上发展起来的一个中一新生代盆地。通过对措勤盆地内发育的构造、地层、岩石及沉积相综合分析,讨论了措勤盆地与喜马拉雅构造带和班公-怒江构造带的对应演化关系,反演了措勤盆地的地质发展历史。其演化经历了盆地基底形成阶段(D—P)、复合弧后盆地演化阶段(J—E2)和高原隆升盆地消亡三个阶段(E2-现今)。  相似文献   

5.
雅鲁藏布江洋俯冲及印度-欧亚陆陆碰撞导致了强烈的大陆岩石圈挤压变形与青藏高原的隆升。研究青藏高原内部破碎带构造-沉积演化,对理解相关变形如何向欧亚大陆腹地扩展传递至关重要。班公湖—怒江缝合带内发育一系列白垩纪—新生代陆相沉积盆地,保存了关于该时期高原内部构造-沉积演化的丰富信息。针对该类盆地的构造性质和形成机制有走滑拉分盆地、断陷盆地、前陆盆地3类不同观点。若要检定上述观点,需要开展如下工作:(1)查明盆地基底与充填建造变形特征;(2)结合构造背景探究其演化机制。鉴于此,本文对该带内尼玛盆地开展大比例尺地质填图与构造分析,结合前人成果,对盆地构造背景、构造性质和构造演化进行了探讨。主要取得了如下认识:(1)尼玛盆地基底为班公湖—怒江洋闭合形成的软碰撞缝合带内的变质岩与海相沉积岩。基底断裂为近东西走向,倾向或南或北的逆冲断裂。(2)盆地充填建造为上白垩统—新近系多旋回河湖相沉积。其变形样式主要为轴向近东西延伸的非对称褶皱,局部卷入基底断裂变形。多幕次变形自边缘向盆地中心前展式递进发展。(3)盆地可以划分为盆北掀斜隆起、南部推覆扇状隆起两处主要剥蚀物源区、中部基底断片掀斜隆起一处次要剥蚀物源区,以及北部叠瓦状压陷区与南部对冲压陷区两处主要构造沉积单元,其构造格架可以概括为“三隆夹两坳”。(4)尼玛盆地肇始于班公湖—怒江洋闭合导致的南北向地壳缩短。其后,雅鲁藏布江洋北向俯冲与印度-欧亚碰撞所致南北向挤压,导致盆地基底断裂发生周期性活动,伴有多旋回磨拉石建造与递进变形。简言之,尼玛盆地为软碰撞缝合带之上发育的山间压陷盆地。  相似文献   

6.
从地球物理的角度出发,利用重力、磁法及电法勘探对河套盆地第四系深覆盖区展开深入研究,对河套断陷带南北边界断裂——鄂尔多斯北界断裂、色尔腾山前断裂的性质,河套盆地第四纪沉积物特征及厚度,河套沉积基底构造的探测进行了大量研究工作,并利用电法剖面对该区第四纪含水层分布规律进行了初步研究。通过重磁联合反演、天然地震数据,分析并推断了研究区由南向北的4条隐伏断层F1-F4及狼山-色尔腾山前大断裂F5,同时揭露了该区结晶基底的起伏及埋深,研究区南部基底深度2.5~4.2 km,北部中心基底最大埋深可达6 km,北部色尔腾山前断裂带迅速升至0~1 km。   相似文献   

7.
青藏高原西缘札达至泉水湖剖面大地电磁探测结果表明, 研究区被雅江缝合带、班公-怒江缝合带划分为3个构造区域, 由南至北分别为喜玛拉雅地体、冈底斯地体和羌塘地体.研究区内普遍存在中下地壳高导层, 高导层的顶面埋深起伏较大, 冈底斯内的高导层埋深大, 羌塘和喜玛拉雅地体内的高导层埋深较浅.在班公-怒江缝合带南侧高导层埋深最大, 班公-怒江缝合带南北两侧高导层埋深存在一个约20km的错动.冈底斯地体内的地壳高导层呈北倾形态, 南羌塘的地壳具有双高导层.沿剖面的上地壳存在多组规模不等、产状不同的电性梯度带或畸变带, 反映了沿剖面地区的缝合带与断裂带分布情况.根据电性结构特征, 推断了雅江缝合带、班公-怒江缝合带以及龙木措、噶尔藏布等主要断裂的构造特征与空间分布.   相似文献   

8.
中生代羌塘前陆盆地充填序列及演化过程   总被引:40,自引:1,他引:40  
李勇  王成善  伊海生 《地层学杂志》2002,26(1):62-67,79
中生代羌塘前陆盆地位于青藏高原巨型造山带内 ,夹于金沙江缝合带与班公湖—怒江缝合带之间 ,是一个与两侧缝合带逆冲作用相关的沉积盆地 ,由羌北盆地 (对应于金沙江缝合带 )、羌南盆地 (对应于班公湖—怒江缝合带 )和中央隆起带构成 ,其中中央隆起是北部前陆盆地和南部前陆盆地共有的前陆隆起 ,显示为对称型复合前陆盆地 ;该盆地形成于晚三叠世 ,并持续发育至早白垩世 ,盆地中充填了巨厚的同构造期的复理石和磨拉石 ,具有总体向上变粗变浅的充填序列 ,以不整合面可将其划分为 5个由顶底不整合面限制的构造层序 ,其中晚三叠世诺利期构造层序对应于金沙江缝合带主碰撞期 ,晚三叠世瑞替期构造层序对应于金沙江缝合带碰撞闭合后冲断抬升 ,早侏罗世构造层序对应于班公湖—怒江缝合带初始逆冲推覆 ,中侏罗世—早白垩世构造层序对应于班公湖—怒江缝合带主碰撞期 ,中白垩世构造层序为班公湖—怒江缝合带碰撞闭合后冲断抬升与金沙江缝合带冲断抬升的产物 ,为中生代羌塘盆地关闭后的磨拉石建造  相似文献   

9.
1成矿地质背景尕尔穷铜金矿床位于西藏冈底斯—念青唐古拉板片西段,狮泉河晚燕山期结合带与冈底斯岩浆构造带的交汇部位,向北约50km即为班公湖—怒江缝合带。班公湖—怒江缝合带东西延伸逾2000km,为西起班公湖,向东经过改则、东巧、丁青、碧土的一条横贯青藏高原中部的重要结合带。该缝合带西段北侧为羌唐—三江复合  相似文献   

10.
西藏措勤盆地中侏罗世—早白垩世沉积充填特征   总被引:1,自引:0,他引:1       下载免费PDF全文
位于班公湖 怒江缝合带与雅鲁藏布江缝合带之间的措勤盆地,在中侏罗世—早白垩世期间具有以且坎古昌 阿索裂谷带为沉积、沉降中心向南北两侧展开的古地理格局:①中晚侏罗世时期,裂谷带内由深水浊积岩、放射虫硅质岩和浅水碳酸盐岩、碎屑岩岩片及基性—超基性岩等组成;裂谷带两侧由滨浅海相碎屑岩和碳酸盐岩组成。该期盆地古地理演化具有先变深后变浅的沉积序列。②早白垩世早中期,裂谷带内仍由基性—超基性岩、深水复理石碎屑岩及放射虫硅质岩和浅水碳酸盐岩及碎屑岩组成;裂谷带两侧的日松革吉它日错分区主要由浅海相碎屑岩和灰岩组成;盆地南北部的措勤 申扎分区和木嘎岗日分区主要由滨岸 三角洲相碎屑岩及火山岩组成。各相带在纵向上均具有向上变深沉积序列。③早白垩世晚期,盆地以台地相碳酸盐岩沉积为主,裂谷带附近以发育台地边缘礁滩相沉积;裂谷带两侧的日松 革吉 它日错分区主要由开阔台地相灰岩组成;盆地南北部的措勤 申扎分区和木嘎岗日分区由局限台地相灰岩和陆源进积碎屑岩组成。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

13.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号