共查询到20条相似文献，搜索用时 531 毫秒
1.
用60个波高仪组成2m×2m的方阵,同步测量波面过程,用Doppler声学流速仪获得了二维正向和斜向规则波、二维正向和斜向随机波以及三维随机波浪场中不同水深处的同步Euler水质点速度各方向分量的高精度的时间过程资料.以此为出发点,讨论了分段式造波机生成波浪的周期分布特征,发现三维随机波浪周期分布的μ值与二维随机波浪比较有明显增大的趋势.分别从速度合矢量方向与波向的吻合程度(对二维波浪)、"多点波面"组合与"波面-水质点速度"组合两种方式得到方向谱的吻合程度(对三维随机波浪)等不同角度,论证了分段式造波机产生的波浪的内外部结构的一致性. 相似文献
2.
在实际海况中,由于波浪组分方向不同,使海浪常表现为三维短峰波,与二维长峰波相比,有诸多异同特征。为了研究三维畸形波生成和演化过程中异常大波的外部特征以及大波间的关联,本文采用色散和方向聚焦方法在物理水池中模拟了短峰畸形波的整个生成和演化过程。研究结果表明,生成和演化过程中出现的异常大波沿着方向分布函数峰值方向演化,具有一定程度“对称”特征;根据异常大波的特征参数可将该过程分成3～4个典型的阶段,这意味着可以根据异常大波的特征参数判断其所处阶段及预测其演化趋势;三维畸形波生成和演化过程可能会跳过“波群”或者“深谷”阶段,与二维畸形波相比,时-空范围较小,这意味着在三维波浪场中,与畸形波相关的深谷和波群的发生概率较低。 相似文献
3.
基于推板造波理论和摇板造波理论,在Open FOAM平台上采用重叠网格技术建立黏性数值波浪水槽,并使用一种结合SIMPLE算法和PISO算法的PIMPLE算法对数值模型进行求解。利用开发的数值模型通过数值收敛性测试和网格独立性测试分别重点研究了时间步长、库朗数和网格尺寸对数值精度和计算效率的影响。并对比研究了此数值模型分别嵌入层流模型和湍流模型的计算精度和计算效率。实现的规则波和二阶有限振幅波与理论结果和试验结果吻合,验证了此黏性数值波浪水槽的造波和主动消波功能。基于二维数值波浪水槽,进一步研究了三维数值造波,数值计算结果与理论结果吻合良好。研究结果不仅验证了重叠网格在二维和三维两相流体域中求解运动物体与流场交互的可靠性和正确性,而且为使用此黏性数值波浪水槽解决更复杂的海洋工程问题提供了依据。 相似文献
4.
当波浪由外海向跨海桥梁所在的近岸海域传播时,随着水深急剧变浅,波浪会发生破碎。强非线性的破碎波会给桥墩结构带来极大冲击作用。基于计算流体力学(CFD)数值软件Flow-3D建立三维数值水槽,造波边界设为斯托克斯五阶波。通过在数值水槽中建立逐渐浅化的三维地形,采用k-ω湍流模型求解雷诺平均N-S(RANS)方程,模拟破碎波冲击桥墩。与前人水槽试验及数值模拟结果进行比对,验证数值水槽的有效性。采用验证过的数值水槽,研究了不同入射波高和周期下的破碎波浪特性,计算了不同长宽比圆端形桥墩在不同入射波高的破碎波作用下受力和流场变化,讨论了最大压强作用点、准静态力和冲击力随桥墩长宽比的变化规律。研究表明:与前人试验和数值模拟相比,所建立的数值水槽具有较高精度;圆端形桥墩破波力随桥墩长宽比增大,先增大后趋于稳定,破波力峰值随着入射波高的增大而增大,同时,圆端形桥墩破波力峰值主要由冲击力控制。进行跨海桥梁圆端形桥墩设计时,应重点关注桥墩长宽比和破碎波冲击力的影响。 相似文献
5.
6.
三维极限波的产生方法及特性 总被引：11，自引：2，他引：9
极限破碎波浪是造成海洋结构物破坏的主要因素之一,对极限波浪的产生方法和特性进行研究具有重要的工程意义.利用长波传播快、短波传播慢的原理,从理论上给出了产生三维极限波的方法,利用基于Boussinesq方程的数值模拟对该方法进行了验证,同时研究了中心频率、频率宽度和频谱形式等对极限波浪特性的影响,为该方法的进一步应用提出了建议. 相似文献
7.
8.
关于波力发电中波浪能量的估算 总被引：1，自引：0，他引：1
为使波力发电装置的容量与波浪力大小相匹配,就必须具备比较准确的波浪参数资料,并据此对安装波力发电装置海区的波浪能量进行估算。这样才能确保波力发电装置的可行性和经济性。本文就如何根据实地测取的波浪资料进行波浪能量的估算方法作初步探讨,在沿用其他工程领域中波浪统计方法的同时,提出新的图表和统计方法以寻求比较符合实际的波浪参数来作为波力发电装置设计时的参考。 相似文献
9.
10.
11.
12.
非线性波浪时域计算的三维耦合模型 总被引：3，自引：1，他引：2
将计算区域Ω划分为内域Ω1和外域Ω2(Ω2=Ω-Ω1),外域控制方程采用改进线性频散特性的二维Boussinesq方程,用预报一校正法数值求解;结构物附近的内域控制方程为三维Navier-Stokes方程,由VOF方法数值求解。通过在外域和内域相匹配的交界面上设置合适的速度和波面边界条件,建立了三维非线性波浪时域计算的耦合模型。模拟试验表明:(1)耦合模型数值波浪水池可以产生稳定的、重复性较好的波动过程;(2)用耦合模型数值波浪水池求解较大浅水区域上的非线性波浪数值计算问题可以取得较高的计算效率,同时又能得出结构物附近的复杂流场。 相似文献
13.
Freak waves are extreme and unexpected surface waves with huge wave heights that may lead to severe damage to ships and offshore structures. However, few researches have been conducted to investigate the impact underneath fixed horizontal decks caused by freak waves. To study these phenomena, a 2-D numerical wave tank is built in which nonlinear freak waves based on the Peregrine breather solution are generated. As a validation, a regular-wave-induced underneath impact is simulated and compared to the existing experimental measurements. Then the nonlinear freak-wave-induced impact is investigate with different values of deck clearance above the mean free surface. In addition, a comparative simulation of a “large” regular wave based on the 2nd-order Stokes wave theory with the same crest height and wave length of the nonlinear freak wave is carried out to reveal the unique features of the nonlinear freak-wave-induced impact. By applying a fluid–structure interaction (FSI) algorithm in which the bottom deck and front side wall are simplified as Euler beams in 2-D and discretized by the finite element method (FEM), the hydroelastic effects are considered during the impact event. The vertical force acting underneath the bottom deck, the transversal force acting on the front side wall, the structural displacements of the elastic deck and wall are analyzed and discussed respectively, from which meaningful conclusions are drawn. 相似文献
14.
15.
A complete analytical solution is presented for the linear diffraction of oblique waves by horizontal rectangular cylinders either fixed at the free surface or mounted on the sea bed in a finite-depth of water. Helmholtz equation is employed as the governing differential equation obtained by reducing the 3-D oblique wave scattering problem to a 2-D case. According to the method proposed, the fluid region is divided into three sub-regions in which the governing differential equation is solved by the separation of variables. The solutions for each region are then matched on the common boundaries of sub-regions to determine the unknowns of the eigen series expansions and Fourier series. Thus transmitted and reflected waves are obtained in the far-field, and forces and moments acting on the rectangular cylinder fixed at the free surface are also given. Comparisons are made in order to check the accuracy of the method. 相似文献
16.
The dynamic responses of two pontoons while connected with each other in irregular waves are calculated by means of three-dimensional (3-D) potential flow theory.The computation is to find the optimal status for connection at a certain sea state.On the basis of the relative motion of two pontoons in irregular waves,Visual FORTRAN programming language,as well as OpenGL (Open Graphics Library),is used to develop a set of virtual reality system of the relative motion of two pontoons,which is fully interactive with realistic effect.The transfinite interpolation scheme is applied for the mesh generation of wave surface,and the wave motion is simulated by surface elevation and calculated by 3-D potential flow theory. 相似文献
17.
This paper provides a practical method for estimating the drag force on a vegetation field exposed to long-crested (2D) and short-crested (3D) nonlinear random waves. This is achieved by using a simple drag formula together with an empirical drag coefficient given by Mendez et al. (1999), in conjunction with a stochastic approach. Here the waves are assumed to be a stationary narrow-band random process. Effects of nonlinear waves are included by adopting the Forristall (2000) wave crest height distribution representing both 2D and 3D random waves. 相似文献
18.
Based on the Navier-Stokes (RANS) equations, a three-dimensional (3-D) mathematical model for the hydrodynamics and structural dynamics of a floating point-absorbing wave energy converter (WEC) with a stroke control system in irregular and extreme waves is presented. The model is validated by a comparison of the numerical results with the wave tank experiment results of other researchers. The validated model is then utilized to examine the effect of wave height on structure displacements and connection rope tension. In the examined cases, the differences in WEC’s performance exhibited by an inviscid fluid and a viscous fluid can be neglected. Our results also reveal that the differences in behavior predicted by boundary element method (BEM) and the RANS-based method can be significant and vary considerably, depending on wave height. 相似文献
19.
Sediment transport in the Hangzhou Bay is extremely complicated due to its bathymetry and hydrodynamic conditions. The ECOMSED model is employed to simulate three-dimensional (3-D) cohesive sediment transport in Hangzhou Bay. Dynamical factors such as Coriolis force, tides, salinity, river discharges, and waves are considered in the model. The wave parameters, including the significant wave height, period, and direction, are calculated with the SWAN model. The Grant-Madsen model is introduced for the bed shear stress due to the combined effect of waves and currents. The formulation of bed shear stress used to calculate the sink/source terms is modified based on previous research that sufficiently validated the formulation with measurement data. The integrated model of the above-mentioned models is applied to simulate sediment transport in Hangzhou Bay. The results of the simulation agree well with field observations concerning the distribution of suspended sediment, indicating that the sediments are remarkably suspended in Hangzhou Bay under the action of waves and currents. 相似文献
20.
In this paper, infragravity (IG) waves, forced by normally and obliquely incident wave groups, are studied using the quasi-3D (Q3D) nearshore circulation model SHORECIRC [Van Dongeren, A.R., I.A. Svendsen, 1997b. Quasi 3-D modeling of nearshore hydrodynamics. Research report CACR-97-04. Center for Applied Coastal Research, University of Delaware, Newark, 243 pp.], which includes the Q3D effects. The governing equations that form the basis of the model, as well as the numerical model and the boundary conditions, are described. The model is applied to the case of leaky IG waves. It is shown that the Q3D terms have a significant effect on the cross-shore variation of the surface elevation envelope, especially around the breakpoint and in the inner surf zone. The effect of wave groupiness on the temporal and spatial variation of all Q3D terms is shown after which their contribution to the momentum equations is analyzed. This reveals that only those Q3D coefficients, which appear in combination with the largest horizontal velocity shears make a significant contribution to the momentum equations. As a result of the calculation of the Q3D coefficients, the IG wave velocity profiles can be determined. This shows that in the surf zone, the velocity profiles exhibit a large curvature and time variation in the cross-shore direction, and a small — but essential — depth variation in the longshore direction. 相似文献