共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
Wunsch提出的反演模式已被人们广泛用于大洋中的环流计算。贝塔螺旋(Beta Spiral)技术也被广泛用于海洋中单站三维流速的计算。本文旨在利用“科学一号”考察船一九八九年十月在西太平洋取得的CTD资料,以这两种方法相结合,优化算出该海域的流速场和体积输送量。 相似文献
4.
针对海洋实测流速资料极其匮乏的事实, 利用2004 年1 月~2009 年12 月月平均的Argo 温盐格点资料, 结合改进的P-vector 方法重构北太平洋绝对地转流流场。与卫星高度计和实测流速的比较以及相关性分析表明, 重构的绝对地转流是可信的, 可以用来研究不同大尺度环流特征及其动力结构。可以为研究海洋动力过程和气候变化提供一套有用的流场数据。 相似文献
5.
6.
本文利用TerraSAR-X(TSX)卫星于2010年4月22日在南海东沙岛附近海域获取的数据进行海洋内孤立波动力要素和海表流速信息的提取研究。基于TSX数据的后向散射强度信息,利用经验模态分解法得到内孤立波半波宽度,再利用两层模型法和参数化法计算得到内孤立波振幅和相速度。反演结果显示,利用参数化方法得到的振幅(约21~39 m)和两层模型法得到的相速度(约1.07 m/s)与历史实测资料较为一致。进而利用TSX的顺轨干涉数据获取研究海域内的多普勒速度,再分别采用M4S模型法和直接分离法处理,进而提取海表流速。结果显示,两种方法得到的海表流速的全场平均值较为一致,均为1.10 m/s左右。M4S模型法对流速最大值的改变量较大而直接分离法对流速最小值的改变量较大。M4S模型对内孤立波波峰线区域海表流速的修正大于无内孤立波的海域。最后,基于KdV方程计算得到内孤立波引起的表面流的流速约为0.28 m/s,对反演出的海表流速贡献占比23%。 相似文献
7.
8.
9.
10.
一、序言 从遙感信息中提取海洋信息是海洋遙感应用的核心问题。 从遙感数据提取海洋数据,现在已经有很多方法与模型。各种方法都有它们的长处和短处。从目前发表的遙感文章来看,大多还是使用数理统计模型。它的优点是方法比较简单,且比较精确。缺点是有很大的局限性,它的结果只有在特定的海区、特定的大气条件和飞行 相似文献
11.
12.
The profiling method is the first method to select in measuring the remotesensing reflectance. In the light of the characteristics of China‘s coastal waters, we develop a new method to compensate the environment‘s effects with the downwelling irradiance‘s profile and to estimate the underwater remote-sensing reflectance rrs(λ). The result indicates that the relative deviation of repetitious rrs(λ) in one station is around 10%. 相似文献
13.
14.
For the static pressure pile, the most important is to determine the standard value of ultimate bearing capacity of single pile. At present, the bearing capacity of pile foundation is usually determined by the cone penetration test (CPT) test. The empirical formula was used in practice, but the effect of excess pore water pressure generated in the penetration on the measured cone-tip resistance and side friction is neglected. In this study, based on the field test results at Fengyu playground at Yancheng Institute of Technology by CPT and CPTU methods, the bearing capacity of pile was predicted by the standardized methods, the LCPC (France method) and CPTU direct prediction methods. The prediction was also compared with the results by the static load test method. The prediction accuracy of the CPTU method was then discussed as well. The results reveal that the accuracy of the CPTU method was the highest, which was consistent with the results obtained by the static load test method. It is the best method and worthy of being applied for predicting bearing capacity of piles in engineering applications. 相似文献
15.
互花米草的快速入侵及扩散将导致入侵地的生态系统失衡。我国大陆从北到南的沿海地区分布着大面积的互花米草,严重降低了海岸带的生物多样性及生态屏障功能。我国各地防控互花米草入侵的主要方法包括物理、化学和生物防治三大类。目前各地采用的刈割、碾埋、围堰水淹等单一的防治方法可有效治理小面积的互花米草入侵,对大面积或成片互花米草的治理效果欠佳。文章通过分析比较现有的治理方法,结合科研实践经验,提出了将物理防治法、化学防治法和生物演替法有机结合起来,适宜中国不同地区互花米草的综合整治方法。 相似文献
16.
For classical Hamiltonian with general form we find a new convenient way to obtain its normal coordinates, namely, let H be quantised and then employ the invariant eigen-operator (IEO) method (Fan et al. 2004 Phys. Lett. A 321 75) to derive them. The general matrix equation, which relies on M and L, for obtaining the normal coordinates of H is derived. 相似文献
17.
目前国际上设计波高的常用计算方法有三种:年最大波高法(Annual Maximum method)、波高阈值法(Peak-Over-Threshold method)和年N大波法(Annual-NLargest method)。利用澳大利亚悉尼观测站连续16年的实测资料和Gumbel概率分布函数对这三种方法进行分析和比较,选出一种比较好的计算方法。结果表明,由年最大波高法计算得到的设计波高值偏大,线性回归系数较小,均方误也较大;波高阈值法计算所得结果与阈值本身取值关系并不大,线性回归相关性也较好;年N大波法计算得到的设计波高与每年大波数量取值无关(N≥5时),均方误较小,线性回归相关性较好。因此,在这三种方法中,年N大波法更适合用来计算设计波高,建议每年大波数取5~6个。 相似文献
18.
Numerical simulation of dam-break wave, as an imitation of tsunami hydraulic bore, with a hump of different slopes is performed in this paper using an in-house code, named a Constrained Interpolation Profile (CIP)-based model. The model is built on a Cartesian grid system with the Navier Stokes equations using a CIP method for the flow solver, and employs an immersed boundary method (IBM) for the treatment of solid body boundary. A more accurate interface capturing scheme, the Tangent of hyperbola for interface capturing/Slope weighting (THINC/SW) scheme, is adopted as the interface capturing method. Then, the CIP-based model is applied to simulate the dam break flow problem in a bumpy channel. Considerable attention is paid to the spilling type reflected bore, the following spilling type wave breaking, free surface profiles and water level variations over time. Computations are compared with available experimental data and other numerical results quantitatively and qualitatively. Further investigation is conducted to analyze the influence of variable slopes on the flow features of the tsunami-like bore. 相似文献
19.
讨论了使用Froude法和Faltinsen法识别线性和非线性阻尼系数时的系统误差。通过回顾两种方法的推导过程,论证了方法的内在假设,并量化两种方法的系统误差。为减少识别过程误差,文中提出了直接积分法,并依据数值与试验数据,讨论了3种识别方法识别结果。结果表明,Froude法相比于Faltinsen法能更好地预报线性和非线性阻尼系数。对于低阻尼浮体问题,Froude法和Faltinsen法可以给出相对准确的预测,而对于强阻尼浮体问题,Froude法与Faltinsen法在确定的线性和非线性阻尼系数中会给出大于5%的系统误差,而直接积分法展示了较高的识别精度。 相似文献