共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
山东海阳所麻粒岩向过渡榴辉岩转化的变质动力学过程及其构造意义 总被引：2，自引：2，他引：0
在山东半岛东南端的乳山海阳所,角闪岩和长英质片麻岩呈互层产出,在某些角闪岩层的中心残留有弱变形的麻粒岩和强变形的过渡榴辉岩（斜长石榴辉岩）团块,在弱变形的麻粒岩团块中发育有窄的（〈１ｃｍ）剪切条带,沿着这些剪切条带和强变形过渡榴辉岩团块中,原麻粒岩被转化为含斜长石的过渡榴辉岩。变形和流体在这一转化过程中加速了元素扩散和迁移的速度,在变形强和有流体加入的部位麻粒岩向榴辉岩转化的程度明显增强,麻粒岩相 相似文献
3.
大别山北部镁铁-超镁铁质岩带中榴辉岩的分布与变质温压条件 总被引：27，自引：3，他引：27
大别山北部镁铁-超镁铁质岩带中的榴辉岩主要有两种产状,一是产于变形较强(面理化)的橄榄岩中,另一种是产于片麻岩中。其中,绿辉石中硬玉端元组分大多为Jd=20mol％～52mol％。产于橄榄岩和片麻岩中榴辉岩的石榴子石成分分别相当于Coleman的B型和C型榴辉岩。石榴子石成分特征及钠质单斜辉石中石英针状出溶体的出现表明,本区榴辉岩早期可能经历过超高压变质作用,且至少经历了3个变质阶段,即:①榴辉岩相峰期变质阶段,主要矿物共生组合为石榴子石+绿辉石+金红石±蓝晶石+石英(或柯石英假象?),p≥2.5GPa、t=595～874℃;②高压麻粒岩相变质阶段,主要矿物共生组合为石榴子石+透辉石+紫苏辉石+钛铁矿+尖晶石+斜长石等,p=1.1～1.37GPa、t=817～909℃;③角闪岩相变质阶段,主要矿物共生组合为角闪石+斜长石+磁铁矿等,p=0.5～0.6GPa、t=500～600℃。该区榴辉岩独特的麻粒岩相退变质阶段,表明榴辉岩在折返初期并未能上升到中上地壳,而处于下地壳,它与南部超高压变质岩有不同的p-t演化史,即在榴辉岩相峰期变质之后经历了近等温减压(或稍升温减压)和降温减压变质过程。 相似文献
4.
柴北缘都兰高压麻粒岩的锆石U-Pb定年及其地质意义 总被引：3，自引：0，他引：3
在柴北缘高压-超高压变质带的东端都兰地区,高压麻粒岩以透镜体的形式存在于石榴白云母片岩、花岗质片麻岩以及斜长角闪岩中。高压麻粒岩的主体为基性麻粒岩,并含少量中酸性麻粒岩。基性麻粒岩主要由石榴子石、单斜辉石、斜长石和石英等组成,而中酸性麻粒岩峰期矿物组合为:石榴子石+斜长石+钾长石+蓝晶石+石英±单斜辉石。根据显微构造和反应结构特征,主要识别出3期变质作用:①峰期高压麻粒岩相阶段(M1);②退变质高角闪岩相阶段(M2);③绿片岩相/低角闪岩相阶段(M3)。选取典型的中酸性麻粒岩样品进行了锆石LA-ICP-MSU-Pb原位定年分析,获得加权平均年龄为446.9±6.5Ma,且CL图像显示锆石内部发育石榴子石、单斜辉石、斜长石等矿物包体,反映锆石可能形成在峰期高压麻粒岩相变质条件下。岩石学和年代学结果显示都兰高压麻粒岩和邻近的榴辉岩同时形成于同一俯冲带的不同热构造环境,高压麻粒岩并非榴辉岩热松弛作用形成的,两者具有各自独立的变质演化历史。 相似文献
5.
俄罗斯白海活动带Uzkaya Salma地区榴辉岩中发现的绿纤石形成于榴辉岩化早期亚绿片岩相阶段。该绿纤石多以包体形式存在于退变榴辉岩的变斑晶石榴石矿物中,并与榍石、金红石、单斜辉石、绿泥石、绿帘石、石英等矿物伴生,极少量单颗粒绿纤石包裹在基质单斜辉石(透辉石)矿物中,呈浑圆状。绿纤石成分上属于铝绿纤石和铁绿纤石,其中以铝绿纤石为主。在详细的岩相学研究基础上,通过相平衡计算,结合矿物温压计计算结果,发现含绿纤石榴辉岩共经历了4阶段的变质演化:Ⅰ早期进变质阶段,以石榴石中的绿纤石+绿泥石+绿帘石+石英等矿物包裹体为特征,依据实验岩石学研究的矿物组合绿纤石+绿泥石+石英和铁绿纤石+绿帘石稳定域,估算该变质阶段温压条件t=160~320℃,p=0.2~0.8 GPa;Ⅱ峰期榴辉岩相阶段,矿物组合为石榴石+Di-Pl后成合晶推测的绿辉石+金红石±角闪石+石英,石榴石核部镁等值线和绿辉石硬玉分子等值线限定其峰期温压条件为t=725~740℃,p=1.4~1.5 GPa;Ⅲ高压麻粒岩相退变质阶段,矿物组合为石榴石+透辉石+角闪石+斜长石+石英,石榴石-单斜辉石温度计和后成合晶中斜长石钙等值线限定该阶段的温压条件t=725~750℃,p=1.1~1.3 GPa;Ⅳ晚期角闪岩相退变质阶段,矿物组合角闪石+斜长石±黑云母+石英,相平衡计算和角闪石-斜长石温度计限定温压条件为t=670~700℃,p=0.7~0.9 GPa。综上,确定了俄罗斯白海活动带Uzkaya Salma地区含绿纤石榴辉岩具有顺时针的p-T演化轨迹,峰期对应的地温梯度为15℃/km,俯冲进变质阶段经历了绿纤石-绿帘石相变质,由峰期榴辉岩相到退变质高压麻粒岩相具近等温降压的特征。研究表明,板块的"冷"俯冲作用在地球演化早期太古宙时期就可能出现了。 相似文献
6.
《吉林大学学报(地球科学版)》2015,(Z1)
<正>大别山是三叠纪华南板块向华北板块之下俯冲形成的碰撞型造山带,包含南大别低温榴辉岩带、中大别超高压变质带和北大别杂岩带等3个含榴辉岩的岩石单位,简称南大别、中大别和北大别。北大别超高压榴辉岩普遍经历过多阶段变质演化过程,特别是峰期之后的麻粒岩相变质叠加,表现为早期的绿辉石退变为细粒的单斜辉石+斜长石+斜方辉石后成合晶(Xu S-T et al.,2000;Liu Y-C et al.,2005,2007,2011, 相似文献
7.
8.
北大别洪庙榴辉岩相岩石Sm-Nd年龄:峰期变质时代 总被引：1，自引：1，他引：0
前人工作认为北大别榴辉岩在榴辉岩相变质后,经历了麻粒岩相退变质作用,因此获得的Sm-Nd矿物等时线年龄代表了麻粒岩相变质时代.本文对北大别安徽洪庙百丈岩榴辉岩相岩石(辉石石榴石岩)的研究表明,该岩石经历了三叠纪超高压变质作用,经历了角闪岩相退变质.所研究样品在峰期变质之后是否经历了麻粒岩相退变质尚不能明确界定.结合矿物氧同位素体系平衡判据,辉石石榴石岩在峰期变质时达到了Sm-Nd同位素体系的均一化和平衡,并且在后期角闪岩相退变质中该同位素体系未出现明显的扰动,因此其Sm-Nd矿物等时线年龄[(225±14)Ma和(229±13)Ma]代表了榴辉岩相变质时代.同时,样品中矿物的同位素组成表明,在俯冲板块折返和退变质过程中,岩石受到外来和内部流体的不均匀作用,造成退变的单斜辉石在同位素组成上的不均一. 相似文献
9.
喜马拉雅造山带是目前最年轻的仍处于碰撞阶段的陆陆碰撞造山带。高喜马拉雅结晶岩系内产出的（退变）榴辉岩记录了印度板块俯冲和折返的重要信息。本文对中喜马拉雅日玛那地区的（退变）榴辉岩进行了岩石学、全岩地球化学及锆石年代学研究,确定了其变质演化、原岩性质及构造背景。日玛那榴辉岩呈透镜状或岩墙状与花岗片麻岩接触,基于矿物组合识别出3个变质阶段：(1)峰期榴辉岩相：石榴子石+绿辉石+多硅白云母+金红石+石英;(2)高压麻粒岩相：以单斜辉石+斜长石后成合晶、黑云母+斜长石的后成合晶为代表;(3)角闪岩相：以基质中角闪石的大量出现为特征。锆石U-Pb定年给出两期年龄,峰期榴辉岩相锆石年龄为约15.5～14 Ma,具平坦的HREE分配模式,缺失Eu负异常,麻粒岩相的年龄约为12 Ma,锆石显著富集HREE,并呈现出Eu负异常的特征,指示石榴子石分解和斜长石生长。矿物温压计限定日玛那榴辉岩峰期变质条件为约730℃、1.9～2.1 GPa。榴辉岩记录了顺时针的变质p-T轨迹,从峰期榴辉岩相经近等温快速降压至麻粒岩相,最后降温降压至角闪岩相。另外,日玛那榴辉岩的原岩为亚碱性玄武岩并沿着拉斑玄武岩趋势演化,地... 相似文献
10.
柴北缘鱼卡河榴辉岩的变质演化——石榴石成分环带及矿物反应结构的证据 总被引：15，自引：2，他引：15
柴北缘鱼卡河榴辉岩的典型矿物组合为石榴石-绿辉石-多硅白云母-金红石。其中粗粒石榴石变斑晶普遍保存进变质生长环带,从核部到边部石榴石的化学成分、包体矿物的种类和粒度皆呈现出规律的分带性。岩相学和矿物化学研究进一步表明,该榴辉岩经历了前榴辉岩相、榴辉岩相及后榴辉岩相三个主要变质演化阶段。前榴辉岩相以石榴石核部成分及核部包体矿物组合石榴石(GrtⅠ) 角闪石(AmpⅠ) 斜长石(PⅡ) 石英(Qtz)为特征,P-T 估算结果为450～500℃和0.6～0.7GPa。榴辉岩相变质阶段又可细分为早期、峰期榴辉岩和退变角闪榴辉岩三个亚相。早期榴辉岩亚相以石榴石幔部成分和幔部包体矿物组合石榴石(GrtⅡA) 绿辉石(OmpⅡA) 多硅白云母(PheⅡA)±黝帘石(Zoi) 金红石(Ru)为代表,估算的温压条件为580～640℃和2.4～2.5GPa;峰期榴辉岩相以石榴石的边部(GrtⅡB)及基质中绿辉石(OmpⅡB)和多硅白云母(PheⅡB)的核部为代表,矿物组合为 GrtⅡB OmpⅡB PheⅡB Ru,估算的 P-T 条件为620～680℃和3.0～3.4GPa;退变角闪榴辉岩相以共生的石榴石的最边部(GrtⅡC)、基质绿辉石(OmpⅡC)和多硅白云母(PheⅡC)的边部及镁红闪石(AmpⅡ)组合为代表,矿物组合为 GrtⅡC OmpⅡC AmpⅡ PheⅡC,估算的 P-T 条件为700～720℃和2.3～2.4GPa。后榴辉岩阶段主要为麻粒岩-高角闪岩相,以绿辉石分解形成透辉石 钠长石冠状体以及进一步分解形成韭闪石 斜长石,铁红闪石分解形成浅闪石 斜长石为代表,P-T 估算结果为550～600℃和0.6～1GPa。温压估算结果表明,鱼卡河榴辉岩经历了升温升压—升温降压—降温降压的一个顺时针 P-T 演化轨迹,它记录了从俯冲-超高压变质-抬升的连续的演化过程。峰期变质条件为630～680℃和3.0～3.4GPa,已达超高压变质范畴。榴辉岩中进变质矿物组合和生长环带的保存说明榴辉岩的形成经历了相对快速的俯冲和折返的动力学过程。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
15.
16.
17.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
18.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population). 相似文献
19.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献