首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations.  相似文献   

2.
针对兖州煤田下组煤深部开采受奥灰高承压水威胁以及当地大型煤化工企业生产用水量大的现状,在已进行的水文地质勘探及放水试验基础上,评价奥灰富水性,并采用有限差分法进行奥灰疏水降压数值模拟研究,提出水煤共采观点。研究结果表明:兖州煤田深部奥灰水压高,合理布置水煤共采孔,可以实现奥灰水位的有效疏降,疏降中心区水位最大降深可达110 m,突水系数显著下降,提高了下组煤开采的安全性;同时可提供煤化工43200 m3/d的供水量,能达到可持续的、水资源保护性的供水效果,实现下组煤的水煤共采。  相似文献   

3.
《Chemical Geology》2007,236(1-2):13-26
We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO2.  相似文献   

4.
5.
6.
Partition coefficients of Hf,Zr, and REE between zircon,apatite, and liquid   总被引:25,自引:2,他引:25  
Concentration ratios of Hf, Zr, and REE between zircon, apatite, and liquid were determined for three igneous compositions: two andesites and a diorite. The concentration ratios of these elements between zircon and corresponding liquid can approximate the partition coefficient. Although the concentration ratios between apatite and andesite groundmass can be considered as partition coefficients, those for the apatite in the diorite may deviate from the partition coefficients. The HREE partition coefficients between zircon and liquid are very large (100 for Er to 500 for Lu), and the Hf partition coefficient is even larger. The REE partition coefficients between apatite and liquid are convex upward, and large (D=10–100), whereas the Hf and Zr partition coefficients are less than 1. The large differences between partition coefficients of Lu and Hf for zircon-liquid and for apatite-liquid are confirmed. These partition coefficients are useful for petrogenetic models involving zircon and apatite.  相似文献   

7.
The distribution of Cu, Co, As and Fe was studied downstream from mines and deposits in the Idaho Cobalt Belt (ICB), the largest Co resource in the USA. To evaluate potential contamination in ecosystems in the ICB, mine waste, stream sediment, soil, and water were collected and analyzed for Cu, Co, As and Fe in this area. Concentrations of Cu in mine waste and stream sediment collected proximal to mines in the ICB ranged from 390 to 19,000 μg/g, exceeding the USEPA target clean-up level and the probable effect concentration (PEC) for Cu of 149 μg/g in sediment; PEC is the concentration above which harmful effects are likely in sediment dwelling organisms. In addition concentrations of Cu in mine runoff and stream water collected proximal to mines were highly elevated in the ICB and exceeded the USEPA chronic criterion for aquatic organisms of 6.3 μg/L (at a water hardness of 50 mg/L) and an LC50 concentration for rainbow trout of 14 μg/L for Cu in water. Concentrations of Co in mine waste and stream sediment collected proximal to mines varied from 14 to 7400 μg/g and were highly elevated above regional background concentrations, and generally exceeded the USEPA target clean-up level of 80 μg/g for Co in sediment. Concentrations of Co in water were as high as in 75,000 μg/L in the ICB, exceeding an LC50 of 346 μg/L for rainbow trout for Co in water by as much as two orders of magnitude, likely indicating an adverse effect on trout. Mine waste and stream sediment collected in the ICB also contained highly elevated As concentrations that varied from 26 to 17,000 μg/g, most of which exceeded the PEC of 33 μg/g and the USEPA target clean-up level of 35 μg/g for As in sediment. Conversely, most water samples had As concentrations that were below the 150 μg/L chronic criterion for protection of aquatic organisms and the USEPA target clean-up level of 14 μg/L. There is abundant Fe oxide in streams in the ICB and several samples of mine runoff and stream water exceeded the chronic criterion for protection of aquatic organisms of 1000 μg/L for Fe. There has been extensive remediation of mined areas in the ICB, but because some mine waste remaining in the area contains highly elevated Cu, Co, As and Fe, inhalation or ingestion of mine waste particulates may lead to human exposure to these elements.  相似文献   

8.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

9.
The crystal/liquid partition coefficients of Lu, Hf, Ti, Mn and Ca have been measured between olivine, clinopyroxene and basaltic melt. The Ti, Mn, and Ca partition coefficients were determined at natural abundance levels. The Lu and Hf partition coefficients were determined at doping levels ranging from 0.5 to 1.5 wt% “trace element” as oxide in order to allow analysis by electron microprobe. Olivine/liquid partition coefficients for Lu, Hf, Ti, Mn, and Ca were determined at 1 bar and temperatures from 1150 to 1177° C. Clinopyroxene/liquid partition coefficients were determined for Lu, Hf, Ti, and Mn at pressures of 10, 15, and 20 kbars and temperatures from 1250 to 1290° C. The olivine/liquid partition coefficients of Hf, Lu, Ti, and Ca are small. D(Hf-ol) is zero within the analytical uncertainty. Both D(Lu-ol) and D(Mn-ol) decrease with increasing temperature, but D(Ti-ol) and D(Ca-ol) are constant over the narrow temperature range studied. The partition coefficient results are summarized below.
T°C  相似文献   

10.
Stratiform quartz-sulphide lodes in Ingladhal occur in a typical Precambrian green-stone-belt environment comprising metabasalts, tuff, chert and cherty iron-sulphide formation. Unusually high cobalt contents of metavolcanics and of sulphide minerals in orebodies suggest a consanguinity between ores and rocks. 90% of total nickel, 70% of total cobalt but only 30% of total copper in rocks occur in silicate phases and thus indicate an early separation of copper from cobalt and nickel. Unusually high non-sulphide copper in barren bedded cherts implies availability of Cu-rich solution prior to their lithification. Pyrite in sediments, in volcanics, and in orebodies is characterized by a distinctive pattern of Co-Ni distribution in each case. Partitioning of Co and Ni between coexisting sulphide pairs is complex, but gross equilibrium is indicated. Very high trace metal content of orebody pyrite sharply contrasts with very low such values in pyrite from adjacent sediments and points to a higher temperature of formation of orebodies.  相似文献   

11.
A theoretical model was developed to study the chemical speciation of the trace elements Zn, Cd, Cu and Pb aqueous solutions and their responses to variations in ionic strength and complexation. Two mixing solutions were investigated, a freshwater-seawater system and a freshwater-brine system. The brine was a calcium, sodium-chloride solution with a molal ionic strength of two. Trace element associations with the ligands OH?, Cl?, CO2?3, SO2?4, and HCO?3 were considered at pHs from 3.5 to 11.0 at 25°C. In general, the relative importance of the various ligand-trace element complexes can be predicted from a comparison of their stability constants. However, the effect of pH on the importance of a given complex is not readily apparent from the stability constants. Freshwater-seawater mixtures, as might be found in a totally mixed estuary, show that seawater composition is the dominant control on chemical complexing. Chloride complexing is similar for lead and zinc in the freshwater-brine mixtures. This similarity may account in part for the association of lead and zinc in strata-bound ore deposits.  相似文献   

12.
The dielectric constants and dielectric loss values of 4 Ca-containing minerals were determined at 1 MHz using a two-terminal method and empirically determined edge corrections. The results are: vesuvianitel κ′ a=9.93 tan δ=0.006 κ′ c=9.79 tan δ=0.005 vesuvianitel κ′ a=10.02 tan δ=0.002 κ′ c=9.85 tan δ=0.003 zoisite1 κ′ a =10.49 tan δ=0.0006 κ′ b =15.31 tan δ=0.0008 κ′ c=9.51 tan δ=0.0008 zoisite2 κ′ a =10.55 tan δ=0.0011 κ′ b =15.45 tan δ=0.0013 κ′ c=9.39 tan δ=0.0008 epidote κ′ 11= 9.52 tan δ=0.0008 κ′ 22=17.1 tan δ=0.0009 κ′ 33= 9.37 tan δ=0.0006 fluorapatite1 κ′ a =10.48 tan δ=0.0008 κ′ c = 8.72 tan δ=0.0114 fluorapatite2 κ′ a =10.40 tan δ=0.0010 κ′ c=8.26 tan δ=0.0178 The deviation (δ) between measured dielectric polarizabilities as determined from the Clausius-Mosotti equation and those calculated from the sum of oxide polarizabilities according to α D (mineral)=∑ α D (oxides) for vesuvianite is ~ 0.5%. The large deviations of epidote and zoisite from the additivity rule with Δ=+ 10.1 and + 11.7%, respectively, are attributed to “rattling” Ca ions. The combined effects of both a large F thermal parameter and possible F-ion conductivity in fluorapatite are believed to be responsible for Δ=+2–3%. Although variation of oxygen polarizability with oxygen molar volume (Vo) is believed to affect the total polarizabilities, the variation of Vo in these Ca minerals is too small to observe the effect.  相似文献   

13.
Indonesia has become the world's largest exporter of thermal coal and is a major supplier to the Asian coal market, particularly as the People's Republic of China is now (2007) and perhaps may remain a net importer of coal. Indonesia has had a long history of coal production, mainly in Sumatra and Kalimantan, but only in the last two decades have government and commercial forces resulted in a remarkable coal boom. A recent assessment of Indonesian coal-bed methane (CBM) potential has motivated active CBM exploration. Most of the coal is Paleogene and Neogene, low to moderate rank and has low ash yield and sulfur (generally < 10 and < 1 wt.%, respectively). Active tectonic and igneous activity has resulted in significant rank increase in some coal basins. Eight coal samples are described that represent the major export and/or resource potential of Sumatra, Kalimantan, Sulawesi, and Papua. Detailed geochemistry, including proximate and ultimate analysis, sulfur forms, and major, minor, and trace element determinations are presented. Organic petrology and vitrinite reflectance data reflect various precursor flora assemblages and rank variations, including sample composites from active igneous and tectonic areas. A comparison of Hazardous Air Pollutants (HAPs) elements abundance with world and US averages show that the Indonesian coals have low combustion pollution potential.  相似文献   

14.
The contents of As, Cd, Cu, Cr, Mg, Mn, Ni, Pb and Zn have been determined in sediment and water samples from Valle de las Garzas estuary and Port Manzanillo (Colima, Mexico) using ICP-AES. The concentrations of these elements were used for a comparative study to determine the distribution of heavy metals and to evaluate which elements reflect natural or anthropogenic backgrounds. For this purpose, seven sampling points were selected: Four of them correspond to the lagoon, and three were situated in the port. Statistical analysis of the mineral content was assessed. Initially, data comparison was assessed by statistical tests for each variable. Principal component analysis was then applied considering the influence of all variables at the same time by obtaining the distribution of samples according to their scores in the principal component space. In this way, four studies were carried out: (1) study of sediments collected during the dry season; (2) study of sediments collected during the rainy season; (3) comparative study between sediments from rainy and dry season; and (4) study of water composition collected during rainy season. From the results of the performed analyses, it can be concluded that metals distribution pattern reflected natural and anthropogenic backgrounds (e.g., sediments from the lagoon, situated at the beginning of the rain channel, presented high contents of Zn and Cu, perhaps related to anthropogenic activities or the influence of igneous sediments).  相似文献   

15.
16.
《International Geology Review》2012,54(10):1510-1522
Quantum-chemical interpretations of differentiation of the “normal” magmatic melt (the “Bowen's fork”) show certain defects in the traditionally crystallochemical interpretations of mineral structures and of the sequence of crystallization of minerals. The “dynamic unit,” in transitions from phase to phase and from lattice to lattice, proves to be the uncharged SiO2 molecule and not the SiO4 tetrahedron, which is but a static architectural detail of crystal structures. Different mechanisms and types of silicification (figs. 3-8), condensation and structures of the chains (figs. 9-14), structures of zeolites and other aluminosilicates (figs. 14, 17, 18), and the quantumchemical representation of corundum, as “molecular” Al2O3, illustrate further reevaluations of traditionalism in mineralogy.  相似文献   

17.
The earthquakes and tsunami on November 15, 2006 and January 13, 2007, near Simushir Island are described. Long-term and short-term precursors of the phenomena are discussed. A joint analysis of the seismological and geodetic data provided reliable interpretation of the source mechanisms of the earthquakes. The actions of the tsunami warning personnel are analyzed. Extensive experimental data on the tsunami occurrence at different sites of the Pacific Ocean are presented. The tsunami of November 15, 2006, was numerically modeled using coseismic vertical displacements of the ocean bottom calculated from GPS data. The observed and calculated data on the maximal tsunami run up are compared.  相似文献   

18.
河北秦皇岛市温泉堡温泉的形成与开发利用建议   总被引:3,自引:0,他引:3  
李娟  周训  方斌  杨燕雄 《地质通报》2007,26(3):344-349
秦皇岛市温泉堡附近有3处温泉。1号和2号温泉是燕山期花岗岩地下破碎带热水储集带的排泄点,3号温泉的出露受断裂控制,是下寒武统府君山组灰岩岩溶含水层的排泄点。地下热水矿化度小于260mg/L,F-含量达5mg/L以上,水化学类型属于Na·Ca-HCO3·SO4型。同位素研究结果表明,温泉的补给来源为大气降水,1号温泉水年龄约19a。利用SiO2温标法计算出热储温度为94.01℃;估算热水循环深度为2792.45m。温泉的天然放热量大于25.13×1013J/a,温泉堡地区的地热资源量达7.29×1014J以上。1号和2号温泉的开采量不宜超过其天然流量,3号温泉流量大,尚有开发潜力。  相似文献   

19.
Fluorite mineralization at the La Nueva and Bubu mines yields Sm-Nd ages of 131 ± 22 and 117 ± 26 Ma, respectively. Thus, the mineralization most probably is related to a late Gondwanian (Lower Cretaceous) extensional and magmatic event that affected the Sierras Pampeanas basement during the opening of the Atlantic Ocean. Hydrothermal fluids involved in the formation of the fluorite probably were of meteoric origin, their isotopic composition (Sr and Nd) resulting largely from the incongruent dissolution of feldspars in the host porphyritic granites.  相似文献   

20.
Sulfide minerals in the Boulder batholith occur 1. as disseminated grains, visible in hand specimens; 2. in aplitic-pegmatitic pods and masses; 3. along joint and shear surfaces; 4. in hydrothermal veins; and 5. as minute masses within pyrite and silicate minerals and along intergranular sites. Hydrothermally altered rocks have an average sulfide content of 0.8 weight per cent, compared to an average of 0.01 per cent for unaltered rocks. Unaltered rock of the batholith may contain as much as 0.7 weight per cent sulfide. Sulfide inclusions in pyrite, the most abundant sulfide of the batholith, are common and represent a captured iss-phase which later changed to chalcopyrite plus pyrrhotite or mackinawite. Inclusions are most abundant, and more complex, in pyrites of hydrothermally altered and ore rocks. Electron-probe analyses show that pyrites of the Boulder batholith have very similar compositions to those found for pyrites from other ore deposits around the world.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号